
describe how monitoring technologies measure a human impact, how well a plan meets the criteria, and what limitations each technology has.
Phase 3: Make Sense
Do Now. A rain gauge sits under a tree. After a storm, it shows less rain than a gauge in the open field. Which reading is wrong, and why?
A weekly trash weigh-in shows a 15% drop after a new recycling bin. What else could explain the drop?
Explore first. Five tool stations sit around the room: a rain gauge, a marked bucket under a model downspout, a plug-in energy meter, a bathroom scale with a trash bag, and a clipboard tally sheet for pollinator visits. At each, take one reading, time how long it takes, and note what could go wrong.
| Tool | Impact it measures | Reading (sample) | Time to read (min) | Cost (sample) | Limitation |
|---|---|---|---|---|---|
| Rain gauge | |||||
| Marked runoff bucket | |||||
| Plug-in energy meter | |||||
| Scale + trash bag | |||||
| Pollinator tally |
Name the ideas. Monitoring technology is any tool that measures change over time, from a bucket to a digital sensor. Every tool has limitations: what it cannot detect, how accurate it is, and how it can be misread. A monitor is only as good as its tools and the way people use them.
Worked example 1: matching tool to impact. Mei’s team wants to measure runoff and energy. The marked bucket under a downspout measures a sample of roof runoff in 2 minutes. The energy meter on one classroom’s power strip reads kilowatt-hours in 1 minute. Total: 3 minutes, well under the 10-minute limit. Sample cost: $10 + $30 = $40, under the $150 sample budget.
Worked example 2: naming limitations. The bucket overflows in a big storm, so it undercounts the largest events. The energy meter measures only one strip, not the whole building. Mei’s team wrote these limits into their plan and added a note on storm size and school days each week, so a change can be linked to their action rather than to a coincidence.
Use your tool table. Discuss each card with your team.
Check a draft monitor plan against the criteria.
Choose two tools for your team's monitor. Describe how well the plan meets each of the five class criteria, using today's sample times and costs, and name one limitation of each tool.
Explain how your monitor uses scientific ideas about Earth's systems (for example infiltration or the carbon cycle) to track a real human impact.
Next time we brainstorm full monitor designs and choose our best ideas to build.
Exit ticket: name one monitoring technology, the human impact it measures, and one limitation. Explain how your team would work around that limitation.
Materials: a rain gauge (or a straight-sided jar with a ruler), a bucket marked in liters, a model downspout (bent cardboard tube) and watering can, one plug-in energy meter, a bathroom scale and a bagged sample of clean recyclables, a pollinator tally sheet, timers.
Setup: stations run 5 minutes each. Use clean, dry recyclables instead of real trash at the scale station. All costs on cards are sample prices.
Listen for: trust in a single reading, or a single week. Connect back to 4.02’s cause-versus-correlation discussion. Part 2’s 2-week sample test builds on today’s limitations.
Support / stretch: give a sorted list of tools by cost and time. Stretch: research one low-cost digital sensor and compare its limitations with a manual tool.