
measure the amplitude, wavelength and frequency of waves on a spring or rope and use data to describe how a wave’s energy depends on its amplitude.
Phase 2: Investigate
Do Now. Two students stretch a long spring along the floor. One student flicks the end gently, then flicks it hard. Watch the pulse travel. Then predict.
Your partner holds the far end. Which flick will they feel more strongly?
The investigation. Explore first. With your team, make waves on a spring or rope stretched about 3 meters along the floor. Use masking-tape marks every 10 cm as a ruler. Shake one end side to side to make a steady, repeating wave. Try small shakes and big shakes, slow shakes and fast shakes. Have one person count shakes in 10 seconds.
| Trial | How you shook it | Shakes in 10 s | Frequency (waves per second) | Wavelength (cm) | Amplitude (cm) | How strong the tug felt (1–5) |
|---|---|---|---|---|---|---|
| 1 | Small, slow | |||||
| 2 | Big, slow | |||||
| 3 | Small, fast | |||||
| 4 | Big, fast |
Naming what you saw. A wave is a repeating disturbance that carries energy without carrying the material along. The amplitude is the greatest distance the spring moves from its resting position. The wavelength is the distance from one crest to the next. The frequency is how many waves pass a point each second.
Worked example 1: reading a wave. Malik’s team counted 20 shakes in 10 seconds. Frequency = 20 ÷ 10 = 2 waves per second. They saw three full wavelengths fit between the 0 cm and 150 cm marks, so one wavelength = 150 ÷ 3 = 50 cm. When they shook faster, the wavelength got shorter.
Worked example 2: amplitude and energy. Scientists measure the energy a wave carries. The table below is sample model data, not measurements.
| Amplitude (cm) | Energy (relative units) |
|---|---|
| 1 | 1 |
| 2 | 4 |
| 3 | 9 |
| 4 | 16 |
Ava noticed the pattern: when amplitude doubles from 1 to 2, energy becomes 4 times bigger. Energy grows with the square of the amplitude (2 × 2 = 4, 3 × 3 = 9). At the same amplitude, a wave with a higher frequency also delivers more energy each second, because more waves arrive.
Same ideas, other waves. For sound, frequency is heard as pitch and amplitude as loudness. For light, a brighter beam carries more energy.
Use your data table and the sample data to answer each card.
Draw and label a wave on your own.
Draw a wave with a wavelength of 4 squares and an amplitude of 2 squares on graph paper. Label the crest, amplitude and wavelength. Then draw a second wave that carries more energy, and explain what you changed.
How confident are you that you can I can describe amplitude, wavelength and frequency and connect amplitude to energy.
Light is a wave too, and it carries energy. Next time, we shine light at different materials and watch what happens to it.
Exit ticket: a wave has a frequency of 2 waves per second and a wavelength of 50 cm. Predict what happens to its energy if you keep the frequency the same but triple the amplitude. Use the sample data pattern.
Materials (per team): a long metal or plastic coil spring, or a 3–4 m rope; masking tape; meter stick; stopwatch. Optional: a phone to video the wave in slow motion for easier wavelength reading.
Setup: tape a ruler line on the floor every 10 cm. Assign the Tester to shake, the Recorder to count and write, and two people to read amplitude and wavelength from the tape.
Listen for: “the wave carries the spring with it” and “faster waves are always bigger.” Separate the variables using the four trials. The energy table is labeled sample model data; the amplitude-squared pattern is the scientific relationship, but students’ tug ratings will only show the trend.
Support / stretch: pre-mark one wavelength on a diagram for students who need it. Stretch: compute the wave speed (frequency × wavelength) for two trials and compare.