
collect and graph data showing how kinetic energy depends on mass and on speed.
Phase 2: Investigate
Do Now. Remember from earlier grades that moving objects have energy of motion. A pebble and a boulder roll down the same slope at the same speed. Which would you rather have hit your fence? Explain.
If a ball rolls twice as fast, how will the energy it carries change?
Explore first: the cup target. Teams roll balls down a short ramp into a paper cup lying on its side at the bottom. The farther the cup slides, the more energy the ball carried. In Test 1, release balls of different mass from the same height. In Test 2, release one ball from different heights, and time it over the last 50 cm to find its speed. Run three trials each and average. A tray of sand works too: compare crater sizes.
| Test | Mass (g) | Release height (cm) | Speed at bottom (m/s) | Cup slide trial 1 (cm) | Trial 2 | Trial 3 | Average |
|---|---|---|---|---|---|---|---|
| 1a | |||||||
| 1b | |||||||
| 1c | |||||||
| 2a | |||||||
| 2b | |||||||
| 2c |
Name the ideas. Kinetic energy is the energy an object has because it moves. It depends on two things. Kinetic energy is proportional to mass: double the mass at the same speed, and the energy doubles. It is proportional to the square of speed: double the speed, and the energy becomes 2 × 2 = 4 times as large. Triple it, and the energy becomes 9 times as large.
Worked example 1: mass (sample data). From the same height, a 10 g ball slid the cup 5 cm, a 20 g ball 10 cm and a 40 g ball 20 cm. Each time the mass doubled, the slide doubled. On a graph of slide versus mass, the points fall on a straight line through zero: a linear relationship.
Worked example 2: speed (sample data). One 20 g ball reached 1.2 m/s from 10 cm and slid the cup 10 cm. From 40 cm it reached 2.4 m/s, twice the speed, and slid the cup about 40 cm, four times as far. On a graph of slide versus speed, the points curve upward: a nonlinear relationship.
Check with a simulation. In the PhET sim, watch the kinetic energy bar as you change the skater’s mass and speed.
Graph your team’s data first, then work through these cards.
Two graphs, two stories.
Make two graphs from your data: cup slide versus mass, and cup slide versus speed. Label axes with units and title each graph. Describe each shape in one sentence.
Which change would add more energy to a rolling boulder: doubling its mass or doubling its speed? Use your graphs as evidence.
Speed is a big multiplier. Next time, we see what that means for a whole debris flow on a ramp.
Exit ticket: explain to the planning board why a fast debris flow is far more dangerous than a slow one of the same size.
Materials (per team): a 1 m ramp (track, gutter or folded cardboard), books for height, balls or marbles of different masses (taping identical marbles into a small cup-cart doubles mass cleanly), a paper cup, a kitchen scale, meter stick, stopwatch or phone timer, goggles.
Setup: mark a 50 cm timing zone at the ramp’s end. Releasing from about four times the height gives about twice the speed; let students find the speed doubling from their timings. Cup slide is a stand-in for energy, so real data will be noisy; averages and trends matter more than exact ratios.
Boundary: describe relationships with graphs, tables and ratios only. Do not ask students to calculate kinetic energy from a formula.
Support / stretch: give pre-labeled graph axes. Stretch: predict the slide for triple speed, then test it.