
test which processes in the rock cycle are driven by the Sun’s energy and which are driven by Earth’s interior heat.
Phase 2: Investigate
Do Now. A cracked driveway gets worse every winter. A volcano erupts lava that hardens into new rock. Both change Earth materials. Where does the energy for each one come from?
Which energy source drives wind and rain that wear rock away?
Trail geologists, the rock cycle has two engines. Today you rotate through four stations and decide which engine drives each process.
Station 1, shake test. Put 10 sugar cubes in a sealed jar and shake 100 times. Count whole cubes and observe the corners. Station 2, freeze test. Compare a sealed water-filled straw from the freezer with one kept at room temperature. Station 3, rain on a slope. Pour 250 mL of water down a tray of sand and gravel and see where sediment ends up. Station 4, the interior. Watch a video clip of lava cooling into rock.
Worked example 1: following energy at Station 3. Jamal explains: the Sun evaporated water, which later fell as rain. Gravity pulled the water downhill, and the water carried sand with it. Sand dropped at the bottom of the tray in a fan. So the Sun’s energy, with gravity, moved sediment to a new place.
Worked example 2: following energy at Station 4. Ava explains: heat inside Earth melts rock deep underground. The magma rises and erupts. As lava cools, crystals form and it hardens into igneous rock. This change is driven by Earth’s interior heat, not by the Sun.
When and where. Sun-driven processes happen at the surface: weathering, erosion and deposition. Interior-driven processes happen deep down: melting, crystallizing and deforming rock. Uplift links them, lifting deep rock to the surface where weathering begins.
The Recorder fills in one row at each station.
| Station | What changed (with numbers if possible) | Earth process it models | Sun or interior heat? | Where on Earth it happens |
|---|---|---|---|---|
| 1 Shake test | ||||
| 2 Freeze test | ||||
| 3 Rain on a slope | ||||
| 4 Lava video |
Formative check on your rock cycle model.
Use your model to describe the Earth materials found at the surface and deep inside Earth. Then explain how ONE material changes into another, naming the process and where it happens.
Two engines drive the rock cycle. Next lesson, we compare slow changes with sudden ones in a stream table.
Exit ticket: give one rock cycle process driven by the Sun and one driven by Earth's interior heat. Say where each happens.
Materials: Station 1: jar with lid, 10 sugar cubes. Station 2: drinking straws sealed at one end with clay and filled with water, one frozen overnight. Station 3: a paint tray or plastic bin, sand and gravel, a 250 mL cup, a catch bucket. Station 4: a short, reputable video of lava cooling (preview it).
Timing (50 min): Do Now 4, mini-lecture 8, stations 4 × 5 min = 20, discuss 8, formative check and exit 10.
Listen for: “Volcanoes get their heat from the Sun.” Contrast surface and deep processes. The independent practice is a formative check of MS-ESS2-1:1a; note students who cannot name surface vs. interior materials.
Support / stretch: Give an engine-sorting card set. Stretch: explain why uplift is needed before deep rock can be weathered.