
build a simple switch so a falling domino closes a circuit, and explain how electric energy changes into light.
Phase 4: Build
Do Now. Your teacher shows a battery, two wires and a small bulb. The bulb is not lit.
What do we need to do to make the bulb light up?
Junior engineers, let’s add a second energy changer. Our bell changes motion energy into sound. Today some teams add a light that turns on in the middle of the chain reaction.
Circuits. A circuit is a closed loop that electric current can flow through. The battery stores energy. Current carries energy through the wires to the bulb. The bulb changes electric energy into light, and a little heat.
Switches. A switch opens or closes the loop. An open switch has a gap, so no current flows. A closed switch fills the gap.
Worked example 1: Jamal’s domino switch. Jamal’s team made a switch from two foil strips taped to an index card. A small gap separates the strips. A battery, two wires and a bulb connect to the strips. When a falling domino lands on the strips and presses them together, the circuit closes. Current flows, and the bulb lights. The part that makes the energy change is the bulb.
Worked example 2: tracing the energy. Priya traced the energy in Jamal’s machine. Motion energy in the domino closed the switch. Stored energy in the battery moved as electric current. The bulb changed it into light. The light energy then moved through the air to our eyes.
| Switch test | Gap open: bulb on or off? | Domino lands: bulb on or off? | Problem we saw |
|---|---|---|---|
| Test 1 | |||
| Test 2 | |||
| Test 3 |
Build and test the switch with your team. Then answer these.
Explain the energy path in your own words.
Describe how energy moves from the falling domino to the light we see. Use the words motion, electric current and light.
How confident are you that you can I can explain how electric current moves energy and makes a bulb light.
Now your machine may have two energy changers. Next time, another team will look at your machine and give you feedback.
Exit ticket: name two energy changers in a machine. For each one, what energy goes in and what comes out?
Materials (per team): one AA battery in a holder, two short wires with alligator clips, a small flashlight bulb in a holder or an LED, aluminum foil, an index card, tape, dominoes.
Setup: pre-build one switch to show. If you use an LED, it only lights one way; flip it if it stays dark. Avoid coin-cell batteries; they are a swallowing hazard and the kindergartners will be near the exhibit.
Listen for: “the current gets used up” (energy changes form; the current keeps flowing in the loop); “the bulb makes energy.”
Support / stretch: let some teams build the switch on its own first. Stretch: add the switch to the chain and test 3 times.