
use electric-field and magnetic-flux models to calculate forces and energy changes, apply Faraday’s law to induction, and explain how generators, transformers and high-voltage lines move energy from a wind farm to a home.
Phase 3: Make Sense
Do Now. A wind turbine spins in a steady wind. Write the chain of energy forms from the moving air to a phone charging in town. Leave a blank where you are not sure what happens.
A strong magnet rests inside a coil connected to a meter. What does the meter read?
Fields store energy and carry forces (HS-PS3-5). Two charges or two magnets interact without touching because each is surrounded by a field. The electric field at a point is the force per coulomb a small positive test charge would feel there: E = F/q, in N/C. Around a point charge, E = kQ/r2, pointing away from a positive charge and toward a negative one.
Worked example: 2.0 cm from a +2.0 nC charge, E = (8.99 × 109)(2.0 × 10−9)/(0.020)2 = 4.50 × 104 N/C. An electron placed there feels F = eE = 7.20 × 10−15 N, toward the charge.
Energy in fields. When a charge moves with the field’s force, the field does work on it and the system’s potential energy falls; push it against the field and you store energy. Voltage measures this per coulomb: an electron crossing a 1.5 V cell gains eV = (1.602 × 10−19)(1.5) = 2.40 × 10−19 J. A proton accelerated from rest through 1,000 V reaches √(2eV/m) = 4.38 × 105 m/s. The same energy bookkeeping you used for gravity in Unit 1 works here: the charges and their field form the system, and energy moves between the field and the charges’ kinetic energy.
Changing magnetic fields make currents. Michael Faraday found in 1831 that moving a magnet into a coil makes a current, but only while the field through the coil is changing. The magnetic flux through a loop is Φ = BA (field times area, for a field perpendicular to the loop). Faraday’s law: the induced voltage (emf) in a coil of N turns is
emf = NΔΦ/Δt
Worked example: a 100-turn coil 5.0 cm across has area π(0.025)2 = 1.96 × 10−3 m2. A magnet pushed in raises B through it from 0 to 0.050 T in 0.10 s: emf = (100)(0.050)(1.96 × 10−3)/0.10 = 98 mV. Push twice as fast and you get 196 mV. Hold the magnet still inside and you get zero.
Lenz’s law is energy conservation. The induced current makes its own magnetic field that opposes the change. Push a magnet in and the coil pushes back; you must do work, and that work becomes the electrical energy. If the induced current helped the magnet along, you would get energy from nothing.
Generators, turbines and transformers. A wind turbine on a ridge-top wind farm turns a coil in a magnetic field (or magnets past coils), so the flux changes continuously and an alternating voltage is induced: the kinetic energy of the wind becomes electrical energy through the field. A transformer uses a changing current in one coil to induce a voltage in a second coil on the same iron core, with Vs/Vp = Ns/Np. A neighborhood transformer with 1000 primary turns and 20 secondary turns steps 12,000 V down to 240 V.
Why the grid uses high voltage. Power lines have resistance, and the power lost as heat is I2R. To deliver 100 MW through a line with 10 Ω of resistance (illustrative): at 115 kV the current is 870 A and the loss is 7.56 MW (7.6%); at 500 kV the current is 200 A and the loss only 0.40 MW (0.4%). Raising the voltage cuts the current, and the loss falls with the square of the current. Transformers make that possible, which is why the grid is AC.
Misconceptions. (1) “A strong magnet sitting in a coil makes a current.” Only a changing flux does. (2) “Transformers create energy by raising voltage.” Raising voltage lowers current; power in equals power out (minus losses). (3) “Field lines are real strings.” They are a model that shows direction and, by their spacing, strength.
A one-dimensional field model of two objects (HS-PS3-5). Hold one proton fixed and place a second proton 1.0 × 10−9 m away, at rest, on a line we call the x-axis. Each sits in the other’s electric field, which points away from a positive charge, so the force on the free proton points along +x, away from the fixed one. The energy stored in the field of this pair is U = ke2/r = 2.31 × 10−19 J at 1.0 nm. Released, the free proton speeds up. At 2.0 nm, U has halved to 1.15 × 10−19 J, so the field has given up 1.15 × 10−19 J and the proton has exactly that much kinetic energy: v = √(2KE/m) = 1.17 × 104 m/s. Far away, all 2.31 × 10−19 J has moved from the field to the proton, which reaches 1.66 × 104 m/s. The force does the work, and the change in field energy equals the change in the objects’ kinetic energy. Push the protons together instead and you do work that is stored in the field.
The same bookkeeping for gravity and magnets. For gravity, Ug = −Gm1m2/r: it is negative and rises toward zero as objects separate, because separating attracting objects takes work. Two attracting objects that move closer convert field energy to kinetic energy; two repelling charges that move apart do the same. Two carts with ring magnets facing like poles behave like the two protons: pushed together, they store energy in the magnetic field; released, they roll apart and the field energy becomes their kinetic energy (minus some thermal energy from friction).
Question. What makes a voltage appear in a coil of wire near a magnet, and what makes it larger?
Materials.
Procedure.
Data table.
| Action | Peak reading (mV) |
|---|---|
| slow push | 1.8 |
| fast push | 6.5 |
| fast pull out | −6.3 |
| magnet at rest inside | 0.0 |
| two magnets, fast | 12.1 |
| Illustrative readings; record three trials of each action and the sign of each reading. | |
Analysis.
Other routes to the same data. Choose one. All three earn full credit. Option A — the coil and magnet. The procedure above. Option B — the sample readings in the table above. No equipment needed; answer every analysis question from them and use the fast-push and two-magnet rows to test emf = NΔΦ/Δt. Option C — PhET Faraday’s Law. Move the magnet through the one-coil and two-coil setups at different speeds and read the voltmeter, then answer the same questions. Cite the sim and the date you used it.
Model first, then calculate. Show units.
Build the unit’s energy-flow model.
Make an annotated energy-flow model from a ridge-top turbine to an outlet in town. At each step (rotor, generator, step-up transformer, line, step-down transformer, home), name the physics (Faraday's law, the turns ratio, I2R) and where some energy leaves as thermal energy. Then use the lesson's numbers to explain why 500 kV wastes far less than 115 kV.
Fields carry forces and store energy, and a changing magnetic field drives a current. Next lesson we put the whole wind-to-outlet model together.
Exit ticket: explain, using energy, why a magnet pushed into a coil is pushed back.
How confident are you that you can I can use field models to explain forces, energy changes and induction in generators and transformers.
Materials: coils, neodymium magnets, millivolt meters, goggles; optional ring magnets on two low-friction carts. Reading: OpenStax Physics (high school), chapters 18 and 20, and OpenStax College Physics 2e, chapters 18, 19 and 23 (CC BY 4.0).
Timing: Poly ran this workshop over two sessions. Period one: fields, field energy and the two-proton model; period two: induction mini-lab, transformers and transmission.
Listen for: “a magnet at rest makes current”; “transformers make energy”; field lines as real strings.
Support / stretch: provide energy bar templates for the two-proton model. Stretch: find the speed of a proton released from 0.50 nm.