build models of our two designs on sand hills and explain how each part will help keep the sand in place.
Phase 4: Build
Raindrop power. Hold your hand flat. Your teacher sprinkles a few drops on it. Now hold a paper towel over your hand. What changes?
A raindrop falls on a leaf before it hits the soil. What happens?
The reading opens over the lesson; close it to come back to exactly where you were.
Engineers, it is build day! A model is a small copy of something real. Our sand hill is a model of the real hillside. Our stopper is a model of a real solution.
Make it fair. Every team makes its hill the same way. Pack one cup of damp sand. Turn it over on the tray near the top edge. Put the tape playground line a hand’s width below the hill.
Build to your sketch. Use only the materials on your list. If you change something, draw the change on your sketch.
Worked example 1: Nia builds the Pebble Wall. Nia’s team lines pebbles across the bottom of the hill with no gaps. They push craft sticks in behind the pebbles. Nia says, “The wall is low and across the hill. It will catch sand that slides down.”
Worked example 2: Theo builds the Felt Blanket. Theo’s team lays felt over the hill and tucks the edges under. They press fluffy cotton bits on top like grass. Theo says, “Like plant cover, the felt takes the hit of the drops. The sand underneath stays put.”
Big idea. Each part of a model has a job. You should be able to point to a part and tell its job.
Build your two models. Stop and answer when your teacher rings the bell.
Explain your models.
Draw your finished Design A model. Label two parts. Write how each part helps keep sand on the hill.
How is your Design B shape different from Design A? Which will work better in the wind? Why?
Your models are ready to test! Keep them on the tray for next time.
Exit ticket: what is one change you made while building? Why?
Pacing: warm-up 3, reading 7, mini lecture 7, build with check stops 17, drawing 4, exit 2 minutes.
Setup: per team, two trays with raised edges, two cups of damp sand, tape, the bin (pebbles, craft sticks, felt squares, cotton balls, paper towels, clay, small cups). Store finished trays flat.
Misconceptions: “the model must look exactly like a real hill” (it shows how the real thing works); “both designs can be the same” (they must differ so we can compare).
Supports: photo checklist of build steps. Stretch: predict how many spoonfuls each model will lose in a big storm.
Answer guide: a built model matching the sketch shows K-2-ETS1-2:1a; “the wall goes across so water hits it” shows 2a; pointing to a part on the model and naming its job begins 3a.
USDA Climate Hubs, Cover Cropping to Improve Climate Resilience · U.S. government work, public domain
Farmers sometimes plant crops just to cover the soil. These are called cover crops. They are not grown to eat. They are grown to protect the ground.
Plant cover catches raindrops. It makes the drops hit the soil less hard. That means less soil washes away in big storms.
Roots help too. When roots grow, they leave tiny tunnels in the soil. The tunnels help soil soak up heavy rain. Soil that soaks up water does not wash away as easily.
When cover crops die and break down, they feed living things in the soil. They help bits of soil stick together into clumps. Clumps of soil hold up better in heavy rain.
Different plants can do this job. Grasses can be cover crops. So can some other plants. All of them can help protect soil from washing away.
Source: USDA Climate Hubs, Cover Cropping to Improve Climate Resilience (climatehubs.usda.gov)