test materials to see if they are flexible or stiff and how much weight they can hold, and record our data.
Phase 2: Investigate
Do Now. Your teacher holds a pipe cleaner and a craft stick. Watch as the pipe cleaner is bent into a circle.
What will happen if we try to bend the craft stick into a circle?
The reading opens over the lesson; close it to come back to exactly where you were.
Two new properties. A flexible material bends without breaking. A stiff material does not bend much. A strong material can hold weight without breaking.
Test 1, the bend test. Gently bend each strip: paper, foil, felt, a craft stick, cardboard and a plastic strip. Does it bend easily, a little, or not at all? Does it spring back?
Test 2, the bridge test. Lay a strip across two books like a bridge. Add pennies to the middle, one at a time. Count how many it holds before it sags to the table.
| Material | Bends easily, a little, or not at all | Springs back? (yes or no) | Pennies it held |
|---|---|---|---|
| Paper | |||
| Foil | |||
| Felt | |||
| Craft stick | |||
| Cardboard | |||
| Plastic strip |
Worked example 1: reading the data. Omar’s team found the paper held 2 pennies and the craft stick held 20. He wrote, “The craft stick is stronger.” These are sample numbers. Your data will be your own.
Worked example 2: a fair test. Grace put the books close together for paper and far apart for cardboard. Her teammate said, “That is not fair.” They moved the books to the same spot for every strip. Now only the material changes.
Why it matters. A shelter wall must stand strong. A roof might need to bend over the top. Different jobs need different properties.
Use your team’s data to answer.
Look at your data table.
Which material was the strongest in your test? How do you know? Use your penny number.
Some materials bend and some stay stiff. Some hold more weight. Next time, we test which materials soak up water and which keep it out.
Exit ticket: Name a material that would make a strong shelter wall. Tell what your data showed.
Materials (per team): strips of paper, foil, felt, cardboard and plastic (about 3 cm by 20 cm), two craft sticks, a pipe cleaner, two books of the same height, 30 pennies or washers, a recording sheet.
Pacing: 5 min Do Now, 7 min reading, 18 min tests, 7 min practice, 3 min closure.
Listen for: “soft means weak” and “flexible means broken.” Felt is soft but does not break when bent.
Supports: pre-mark the book gap with tape. Stretch: fold the paper in a zigzag and test again. Answer guide: the exit ticket names a material and its penny count.
NASA Johnson Space Center, Spacewalk Spacesuit Basics · NASA content; NASA material is generally not subject to U.S. copyright
A spacesuit needs to bend and stay strong at the same time. NASA uses different materials for different parts.
Stretchy. Next to the skin, astronauts wear a tight suit. It is made of stretchy spandex. Thin tubes in it carry cool water. The water takes heat away from the body.
Hard to tear. One layer of the suit is made to resist tearing. It is called the ripstop layer.
Bendy fingers. The gloves are made so fingers can move easily. Heaters keep the fingers warm. The fingers get colder than any other part of the body in space.
Stiff and strong. The top part of the suit is hard. It is light but strong. The arms and gloves connect to it. The helmet is made of strong plastic.
Joints. Suits made for walking on the Moon have special joints at the hips and knees. These help astronauts walk instead of hop.
The soft parts bend. The hard parts stay strong. Each material is used where its properties help most.
Source: NASA Johnson Space Center, Spacewalk Spacesuit Basics (nasa.gov)