explain how the shape of a roof helps it shed rain and hold weight.
Phase 4: Build
Let’s look. Your teacher pours a little water on a flat piece of foil and on a slanted piece of foil. Watch where the water goes.
Where will the water go on the slanted foil?
The reading opens over the lesson; close it to come back to exactly where you were.
Builders, shapes matter. The shape of a roof helps it do its job. Its job is to keep water out and to stay up.
Flat or slanted? On a flat roof, water can sit in a puddle. Then it may drip through a crack. On a slanted roof, water runs down and off. That is called shedding the rain.
Material matters, too. A roof needs a material that does not soak up water. Felt soaks it up. Foil and plastic let it run off. A roof also needs something stiff under it, like craft sticks, so it does not sag.
Worked example 1: Rosa’s tent roof. Rosa leans two cardboard pieces together like a tent. She covers them with plastic. Water runs down both sides and off the edges. Rosa says, “The slant sends the water away.”
Worked example 2: Ben’s flat roof. Ben lays foil flat across four block walls. The foil sags in the middle. Water makes a puddle in the dip. Ben adds three craft sticks under the foil. Now it is stiff and does not sag. The stiff sticks help the roof hold its shape.
Ask yourself: What is the job? What shape helps with that job? Which material has the right property?
Match the shape and material to the job.
Draw and write.
Draw a slanted roof in the rain. Add arrows to show where the water goes.
Write one sentence that tells how the shape helps the roof do its job.
Next time, we make a careful plan drawing with labels.
Exit ticket: will your team use a flat roof or a slanted roof? Write one reason.
Pacing: warm-up demo 5 min, reading 6 min, mini lecture 8 min, guided practice 10 min, draw and write 9 min, exit 2 min.
Setup: for the demo, tape one foil square flat on a tray and fold another over a book to make a slant. Use a spoon of water on each.
Misconceptions: “a slanted roof is stronger.” A slant helps water run off; strength comes from stiff parts and how they are put together. Some students think foil soaks up water because it gets wet on top; show that the towel under it stays dry.
Supports: give a roof picture to trace and an arrow stamp or sticker. Sentence frame: “The ___ shape helps because ___.”
Answer guide: “The slant makes the rain run off, so it does not drip inside.” Accept flat roofs with a reason about holding blocks or using stiff sticks.
National Park Service, Preservation Brief 4: Roofing for Historic Buildings · U.S. government work, public domain
Every shelter needs a good roof. People who care for old buildings say a roof has big jobs. It sheds the rain. It shades from the sun. It keeps out bad weather.
To shed rain means to make water run off. Builders shape roofs to help. On one old house, part of the roof was carefully sloped. The slope sent the water away. A slope is a slant, like a slide.
Roofs are made of many materials. Some are clay tiles. Some are flat pieces of stone called slate. Some are wood shingles. Some are sheets of metal. Long ago, some clay tiles had finger marks pressed into them to help water drain.
Each material has good and not so good parts. Slate lasts a long time, and it does not burn. Wood shingles can wear down from rain and sun. Metal sheets are light and easy to put on.
A roof that leaks lets water inside. Water can harm wood, paint and walls. So a leaky roof needs a fix fast.
Source: National Park Service, Preservation Brief 4: Roofing for Historic Buildings (nps.gov)