sketch two different wash-away stoppers and explain how each shape helps it do its job.
Phase 4: Build
Shape puzzle. You want to stop water running down a hill. Would you lay a craft stick going down the hill or across it?
Which stick will slow the water more?
The reading opens over the lesson; close it to come back to exactly where you were.
Engineers, today we draw. Engineers sketch ideas before they build. A sketch is a quick drawing that shows the shape of an idea. We will sketch two different designs.
Remember our criteria. It slows down water and wind, so less sand reaches the playground line. It works in big storms and in many small rains. It stays in place. It is safe for children. And our limits: bin items only, it fits on the tray, we build in one class time.
Shape helps the job. The reading showed that a windbreak goes across the wind and has no gaps. Our stopper can use the same ideas for water. A wall across the hill catches water. A wall with gaps lets water rush through.
Worked example 1: Nia’s Pebble Wall. Nia draws a row of pebbles across the bottom of the hill. She draws craft sticks pushed in behind the pebbles, like a little fence. She labels it: “Across the hill. No gaps. Catches sand that slides down.”
Worked example 2: Theo’s Felt Blanket. Theo draws felt laid over the whole top of the hill. He adds fluffy cotton bits like grass. He labels it: “Covers the sand. Stops drops and wind from hitting it.”
Big idea. A good sketch shows the shape and has labels. The labels tell how the shape helps solve the problem.
Look at Nia’s and Theo’s sketches with your partner.
Your team sketches two designs.
Sketch Design A. Add at least two labels. One label tells how the shape helps stop sand from washing down.
Sketch Design B. It must be different from Design A. Write how it will work in a gentle rain and in a big storm.
Two designs are ready. Next time we build models of them.
Exit ticket: write the materials you need for Design A.
Pacing: warm-up 4, reading 8, mini lecture 8, guided checks 7, team sketching 11, exit 2 minutes.
Setup: a sketch sheet with two boxes, a materials list strip and the criteria chart. Show the bin so teams sketch only what they can use.
Misconceptions: “a sketch must be pretty” (it must be clear and labeled); “more stuff is always better” (the stopper must fit on the tray and be built in one class time).
Supports: label stickers (across, cover, no gaps, heavy). Stretch: add an arrow showing where the water will go.
Answer guide: a labeled sketch shows K-2-ETS1-2:1b. “Across the hill so water hits it” shows 2a. A note about both gentle rain and big storm shows 2-ESS2-1:2a.
USDA National Agroforestry Center, Conservation Buffers: 3.2 Windbreaks for Wind Erosion · U.S. government work, public domain
A windbreak is a row of trees or bushes that slows the wind. Farmers plant them to keep wind from blowing soil off their fields.
The shape of a windbreak matters. It is planted across the wind, not pointing the same way as the wind. Most windbreaks for soil have one, two or three rows of plants.
A windbreak protects the ground behind it. The taller the trees, the farther the safe area goes. It protects ground about 10 to 15 times as far as the trees are tall.
A windbreak should not be too thin or too thick. About half solid works best for keeping soil in place.
Gaps are a problem. If one tree in a single row dies, it leaves a hole. Wind rushes through the hole faster. That is why more rows protect better than one row. A windbreak should also be longer than the place it protects.
Source: USDA National Agroforestry Center, Conservation Buffers: 3.2 Windbreaks for Wind Erosion (fs.usda.gov)