
Time to Stop: Safer Crossings
How long should a yellow light last, and how fast should cars go near a school crosswalk, so that every driver can stop in time?
The mystery: A crossing guard steps into a school-zone crosswalk as a car approaches at 25 mph, and a signal down the street turns yellow: can each driver stop in time? Client: a city transportation department’s school-safety team.
define position, displacement, velocity and acceleration with signs and units, and read velocities, accelerations and displacements from position-time and velocity-time graphs.
Phase 1: Spark
Do Now. A crossing guard steps into a school-zone crosswalk. A car is coming at 25 mph, a common school-zone limit. Write your first guess: how many meters does the car travel from the moment the driver sees the guard until it stops? Keep the guess; you will test it with a model by the end of the unit.
A car waiting at a crosswalk line starts moving and speeds up steadily. What will its position-time graph look like?
The phenomenon. A crossing guard steps into a school-zone crosswalk. Many communities set the limit near schools at 25 mph when children are present. Whether a driver can stop in time depends on four quantities that physics defines precisely: position, displacement, velocity and acceleration. This unit builds them into a model you will use to design a safer crossing.
Units first. Physics works in SI units. One mile is exactly 1,609.344 m, so 1 mph = 0.44704 m/s, and 25 mph = 25 × 0.44704 = 11.18 m/s. A car at 25 mph covers about 11 m every second, the length of two and a half cars.
Position and displacement. Position x is where an object is, measured from a chosen origin along an axis with a chosen positive direction. Displacement is the change in position, Δx = xf − xi. It has a sign, so it is a vector in one dimension. Distance is the total path length and is never negative. Example: you walk 600 m east to school in 8 min, then 200 m back west to a friend’s house in 2 min. Distance = 800 m, but displacement = +400 m (east).
Velocity and speed. Average velocity is displacement divided by time, vavg = Δx/Δt; average speed is distance divided by time. For the walk, average speed = 800 m / 600 s = 1.33 m/s, but average velocity = 400 m / 600 s = 0.67 m/s east. On a position-time graph, velocity is the slope. A steeper line means faster motion, a horizontal line means the object is at rest, and a downward slope means motion in the negative direction.
Acceleration. Acceleration is the rate of change of velocity, a = Δv/Δt, in m/s per second (m/s2). On a velocity-time graph, acceleration is the slope.
Worked example: leaving the crosswalk. A car waits at the line, then speeds up steadily to 12 m/s in 4 s, cruises at 12 m/s for 6 s, and brakes steadily to rest in 4 s at the next corner.
The position-time graph of the same trip is below. While the car speeds up, the slope grows, so the curve bends upward. While it cruises, the graph is a straight line of slope 12 m/s. While it brakes, the slope shrinks to zero and the curve levels off at 120 m.
Common misconceptions. (1) A motion graph is not a picture of the road. A rising line on a velocity-time graph does not mean the car is going uphill. (2) Negative acceleration does not always mean slowing down. An object slows down when velocity and acceleration have opposite signs. A car moving in the negative direction and speeding up has negative velocity and negative acceleration. (3) Zero velocity does not mean zero acceleration. A ball thrown straight up has v = 0 at the top but is still accelerating downward at 9.8 m/s2.
Why this matters beyond one crosswalk. Road crashes are one of the leading causes of death for children and young adults worldwide, and pedestrians near schools are among the most exposed road users. Stopping distance is one of the few parts of that problem that engineers can calculate and design around.
Driving question for the unit. A driver at 25 mph sees the crossing guard. How far does the car travel before it stops, and what should a yellow light’s duration, or a school zone’s speed limit, be so that stopping is possible?
Work with a partner. Sketch each graph on a mini whiteboard before you answer.
Start your Design Notebook for the unit.
Write two questions you would need answered to decide whether a driver at 25 mph can stop before a crosswalk. Then explain, in two or three sentences, why stopping near schools is a problem worth an engineer's time, using one number from today's lesson.
We can now describe motion with numbers and graphs. Next lesson, we meet our client and launch the project.
Exit ticket: a velocity-time graph of a braking car is a straight line from 15 m/s to 0 in 5 s. Find the acceleration and the braking distance, and show which part of the graph each comes from.
How confident are you that you can I can read velocity, acceleration and displacement from motion graphs and explain what their slopes and areas mean.
Materials: mini whiteboards, graph paper, calculators.
Setup: collect each student’s Do Now guess on a sticky note and post them on the Wonder Board; 1.06 and 1.10 return to them.
Listen for: reading a velocity-time graph as a picture of a hill; “negative acceleration means slowing down”; multiplying top speed by time instead of finding the area.
Sensitivity: some students may know someone hurt in a crash. Keep the focus on design and prevention, and let students pass on personal stories.
Support / stretch: give a graph template with labeled axes. Stretch: sketch the acceleration-time graph of the worked-example trip.