carry out our test plan and record data about how well each latch meets the criteria.
Phase 4: Build
Do Now. Assign team jobs: Tester, Counter, Recorder and Safety Checker. What could go wrong if nobody writes the numbers down?
What does the Recorder do?
The reading opens over the lesson; close it to come back to exactly where you were.
Today we gather evidence. Follow your plan step by step. Do not change the rules in the middle. Record what really happens, even if it surprises you.
Watch the door. At rest, the door does not move because the forces are balanced. When the cup’s pull beats the magnet’s pull, the forces are unbalanced. The door starts to move. A force can start, stop or change motion.
Look for patterns. In the Click-Back Test, the door swings, meets the magnet and clicks. If this happens again and again, you can predict the next try.
Worked example 1: Nia’s Pull Test (sample data). Nia’s door opened at 11, 12 and 11 washers. All three trials are between 6 and 20. She writes: “Meets the Pull Score criterion.”
Worked example 2: Mateo’s Click-Back Test (sample data). Mateo’s door clicked 6 times out of 10. The goal is 8. He writes: “Does not meet the criterion yet. The door often stops just short of the magnet.” That is a failure point.
| Test | Trial 1 | Trial 2 | Trial 3 | Met? |
|---|---|---|---|---|
| Pull Score (washers) | ||||
| Bump (5 taps) | ||||
| Two Fingers | ||||
| Click Back (out of 10) | ||||
| Safety Check |
Run each test with your team. Use the questions to check your method.
Finish your data page.
Which criteria did your latch meet? Which did it miss? Use numbers from your table.
Describe what the door did when the pull got big enough. Use the words balanced and unbalanced.
You now have real evidence. Next, you will use it to compare designs.
Exit ticket: What was the most surprising result from today?
How confident are you that you can I can tell what happened to the door when forces changed.
Pacing: Do Now 3, instruction 7, testing 22, independent 5, closure 3.
Materials: prototypes, test plans, cups, string, washers, data tables.
Watch for: teams changing the latch between trials; dropping washers into the cup; reporting only their best trial.
Misconceptions: a resting object has no forces on it; a failed test means a failed team.
Supports: use tally marks for clicks. Stretch: find the middle value of the three Pull Scores.
Answer guide: students cite measured results and compare them with the Design Card. Force language: balanced while shut, unbalanced when the door starts to move.
NASA Jet Propulsion Laboratory, Twin of NASA's Perseverance Mars Rover Begins Terrain Tests · NASA/JPL-Caltech; linked and retold in our own words
The Perseverance rover explores Mars. Nobody can walk over to fix it. So NASA keeps a twin rover on Earth. The twin is named OPTIMISM. It is a full-size engineering model, which means a copy built for testing.
OPTIMISM works in the Mars Yard, a test area with slopes and obstacles. The yard is about as long as a doubles tennis court and twice as wide. There the twin drives, drills into rocks and stores samples in metal tubes.
Engineers use the twin to check that commands are safe before sending them to Mars. For example, they tested whether the rover might slip while drilling on a slope. A slip could jam the drill.
The twin is not exactly the same. Earth’s pull is stronger than the pull on Mars, so OPTIMISM has thicker wheels.
Your cubby is a test model too. Each trial you run today helps you learn what works before a real child ever uses a latch like yours.
Source: NASA Jet Propulsion Laboratory, Twin of NASA's Perseverance Mars Rover Begins Terrain Tests (jpl.nasa.gov)