build a working model latch and use magnet science to explain how it holds the door.
Phase 4: Build
Do Now. Hold a steel washer and look at it closely. It does not pull on paper clips by itself. Why might it stick to a magnet?
What will happen if a covered magnet comes near a hanging steel washer?
The reading opens over the lesson; close it to come back to exactly where you were.
Today you build. A prototype does not need to be perfect. It needs to work well enough to test. Choose one idea and make it real.
Build steps. First, cover each magnet with a layer of tape and a paper pocket. Next, tape the pocket firmly to the frame. Then attach the door part. Add a wide pull tab. Last, close the door and see what happens.
Line it up. A magnet’s pull gets weaker as the gap grows. If the magnet and the door part do not meet, the latch may not hold.
Ask testable questions. Good builders ask: Does the gap change the hold? Does turning the magnet change the hold? We can test questions like these in our classroom.
Worked example 1: Hana lines up her parts. Hana’s door will not stay shut. She closes it slowly and sees the washer sits 2 centimeters below the magnet. She moves the washer up. Now the door clicks shut.
Worked example 2: Caleb’s magnets push. Caleb’s two-magnet door bounces open. He asks, “Are matching poles facing each other?” He turns the door magnet around. Now opposite poles face each other, and the door holds.
Build with your team. Stop at each checkpoint and answer together.
Label and explain your prototype.
Draw your prototype. Add arrows to show the magnetic pull and the pull of a hand opening the door.
Explain how your latch holds the door shut without a hook.
Store your cubby safely and count every magnet. Tomorrow is Test Day.
Exit ticket: What part of your prototype are you most worried about? Why?
How confident are you that you can I can explain how magnets hold my latch shut.
Pacing: Do Now 3, instruction 7, build with guided checkpoints 22, independent 4, closure 4.
Materials per team: shoebox cubby, cardboard, tape, paper, scissors, string, steel washers, up to 2 large classroom magnets.
Safety: check every team’s magnet covers. Count magnets before students leave. Do not use small rare-earth magnets.
Misconceptions: magnets attract all metals; the bigger magnet is always stronger; steel washers are magnets on their own.
Supports: pre-cut door hinges and pull tabs. Stretch: predict how one cardboard spacer will change the hold.
Answer guide: drawings show one arrow from the door part toward the magnet and one arrow in the direction the hand pulls. Explanations mention magnetic pull working between the parts.
National MagLab, Magnet Academy, Magnets from Mini to Mighty · (c) National MagLab; linked and retold in our own words
Magnets come in many sizes. A small one may hold a note on a refrigerator. Giant ones help scientists do research. But all magnets share some rules.
Every magnet has a north pole and a south pole. Opposite poles pull toward each other. Matching poles push apart. This push or pull is called magnetic force. The space around a magnet where you can notice its force is its magnetic field.
Only a few metals respond strongly to magnets at room temperature. Iron, nickel and cobalt are three of them. Steel is mostly iron, so a magnet pulls on a steel washer.
Some materials stay magnetic for a long time. Certain ceramic magnets do this. Other materials act like magnets only while they are in a magnetic field. Soft iron is one example.
Now picture our latch. A magnet sits on the frame. A steel washer sits on the door. When the door swings close, the magnet’s field reaches the washer, and the pull holds the door shut.
Source: National MagLab, Magnet Academy, Magnets from Mini to Mighty (nationalmaglab.org)