work with a team to plan and run a test showing how balanced and unbalanced forces affect a toy car.
Phase 2: Investigate
Do Now. A toy car sits in the middle of a table. A string goes from each end of the car, over each table edge, to a paper cup. Each cup holds the same number of washers.
What will the car do when your teacher lets go?
The reading opens over the lesson; close it to come back to exactly where you were.
Two pulls at once. Things often have more than one force on them. In our Cup Tug, gravity pulls the washers down. Each cup pulls its string. Each string pulls the car.
Balanced forces. When two pulls are the same size and go in opposite directions, they are balanced. A still car stays still.
Unbalanced forces. When one pull is bigger, the forces are unbalanced. The car moves toward the bigger pull.
Change one thing. We will change only the number of washers in one cup. More washers means a bigger pull. We are not measuring exact force. We are comparing more and less.
Worked example 1: a balanced test. Priya puts 5 washers in each cup. The car stays still. She writes: “Same pull on both sides. Balanced. No motion.”
Worked example 2: an unbalanced test. Theo puts 8 washers in the right cup and leaves 5 in the left. The car rolls right. He writes: “The right pull was bigger. Unbalanced. The car moved right.”
A small surprise. One extra washer may not move the car. Friction can hold it back. If that happens, add another washer and record what you see.
Plan, then test. Agree on your plan: 5 washers on the left every time. On the right try 5, then 3, then 8. Try each one twice. Write what the car does.
Show what you found.
Draw the car with both cups for one test. Label what causes each pull. Write Balanced or Unbalanced.
A latch holds a door shut while a child's coat pushes on it. Are the forces on the door balanced or unbalanced while it stays shut? How do you know?
Matching pulls keep the car still. A bigger pull on one side moves it. Next time you will plan a fair test of your own.
Exit ticket: how could you make the car roll left without taking any washers out of the right cup?
Pacing (40 min): demo 5, mini lecture 7, reading 5, plan and test 14, independent work and exit ticket 9.
Materials per team: toy car with free-rolling wheels, 2 strings, 2 paper cups, about 15 washers, tape, table with clear edges. Check that strings slide easily over the edge; a pencil taped at each edge helps.
Boundary: washers mean more or less pull. Do not add force values or use newtons.
Misconceptions: “No motion means no forces.” Point to both tight strings. Small differences may not move the car because of friction; treat this as useful data.
Supports: a pre-drawn table with Left, Right, What Happened. Stretch: ask what would happen with 2 strings on one side.
Answer guide: forces on a door held shut are balanced because it does not move. Exit ticket: add more washers to the left cup until its pull is bigger.
NASA Glenn Research Center, Aircraft Motion: Newton's First Law · U.S. government work, public domain
Picture an airplane flying high in the sky. Its engines push it forward. That push is called thrust. The air pushes back against the plane. That push is called drag.
NASA explains what happens when a plane cruises at a steady speed. The thrust and the drag match. They are balanced. Since they cancel each other out, the plane’s speed does not change. It keeps going straight.
Now the pilot gives the engines more power. The forward push is now bigger than the backward push. The forces are unbalanced, so the plane speeds up.
Here is a surprise. As the plane goes faster, the drag grows. Soon the drag catches up to the thrust. The forces are balanced again. The plane stops speeding up and flies steadily at its new, faster speed.
The big idea is simple. Balanced forces do not change motion. Unbalanced forces do.
Source: NASA Glenn Research Center, Aircraft Motion: Newton's First Law (www1.grc.nasa.gov)