test how distance and the way magnets are turned change magnetic pushes and pulls, and describe what magnets can act on.
Phase 2: Investigate
Do Now. Your team has two bar magnets. Look at the letters N and S on the ends. Before you touch them, think about what might happen if you bring two N ends close together.
What will two N ends do when they come close?
The reading opens over the lesson; close it to come back to exactly where you were.
Forces without touching. A magnet can pull a paper clip before they touch. It can push another magnet away across a gap. Now we will test what changes those forces.
Direction depends on how magnets are turned. N near S pulls together. N near N pushes apart. S near S pushes apart. If you turn one magnet around, a pull can become a push.
Strength depends on distance. The closer the magnet, the stronger the pull. Slide a clip toward a magnet along a ruler. At some point it jumps. We call that the jump distance.
Not everything is pulled. Magnets pull on iron and steel. Most paper clips are steel. Foil, plastic and wood are not pulled. And a magnet can pull right through thin paper.
Worked example 1: jump distance. Here is sample data from Ravi’s team. With one magnet, the clip jumped at 3 cm. With two magnets stacked together, it jumped at 4 cm. Ravi says, “Two magnets pulled from farther away.”
Worked example 2: turning a magnet. Grace set one magnet on two pencils so it could roll. She brought an S end near its S end. It rolled away. She turned her magnet around, and it rolled toward her. She writes: “Turning the magnet changed the push into a pull.”
Three stations. Station 1: test whether a clip, foil, plastic and wood are pulled. Station 2: find the clip’s jump distance 3 times. Station 3: use two magnets and try N-N, S-S and N-S.
Connect it to our latch.
Your latch needs to pull a door shut. Should the two latch parts attract or repel? Should they be close or far apart when the door is shut? Explain using your lab.
Magnets can push or pull without touching. Distance and direction matter. Next we meet another force that works across a gap.
Exit ticket: draw two magnets that will push apart. Label the poles.
Pacing (40 min): Do Now 4, mini lecture 7, reading 5, stations 16, independent work and exit ticket 8.
Materials per team: 2 large labeled bar magnets, steel paper clips, ruler, foil, plastic and wood samples, paper, 2 round pencils. Do not use small or high-powered magnets.
Misconceptions: “Magnets pull all metals.” Foil shows they do not. “Bigger magnets are always stronger.” Have students test, not assume. Jump distances vary with the magnet; worked-example values are sample data.
Supports: color-code poles. Stretch: test how many sheets of paper the pull can pass through.
Answer guide: latch parts should attract and sit close when shut, because the pull is stronger up close. Exit ticket: N facing N, or S facing S.
NASA, An IMAGE Satellite Guide to Exploring the Earth's Magnetic Field · NASA educational publication; NASA content is generally not subject to U.S. copyright
NASA’s magnet guide gives students clear words for what they feel. Every magnet has two poles, usually called north and south. The poles are where the magnet’s effects are strongest.
Poles follow a simple rule. Two poles that are alike, like north and north, repel. That means they push away from each other. Two poles that are different, north and south, attract. That means they pull toward each other.
The space around a magnet where it can push or pull is its field. You cannot see a field. The guide says a field gets weaker as you get farther from its source. So a magnet pulls harder on a paper clip that is close than on one that is far away.
The guide invites students to find out which objects a magnet can attract. It also asks them to look for what those objects have in common. That is what we will do today.
Source: NASA, An IMAGE Satellite Guide to Exploring the Earth's Magnetic Field (science.nasa.gov)