THE VR SCHOOL
  • Schools & Districts
    • License the academy
    • Free program for your students
    • Request a demo
  • Catalog
    • AI & Data
    • Cybersecurity & Web
    • Programming
    • Health Science
    • All Guilds
    • All courses
  • Families
  • Accreditation
  • Log In
  • Request a demo
  • Home
  • Courses

RLP Physics B — Energy, Thermal Physics, Electromagnetism and Waves

Curriculum

  • 5 Sections
  • 23 Lessons
  • 10 Weeks
Expand all sectionsCollapse all sections
  • Unit 1: Energy, Work and Power
    5
    • 1.1
      Pumped Storage: Work, Kinetic and Potential Energy
      50 mins
    • 1.2
      Ramp Lab: Measuring Energy Transfer and Efficiency
      100 mins
    • 1.3
      Where Did the Energy Go? Springs, Rubber Bands and Thermal Energy
      100 mins
    • 1.4
      Power and a Pumped-Storage Day: A Computational Energy Model
      100 mins
    • 1.5
      Performance Task — Design, Build and Refine an Energy Converter
      200 mins
  • Unit 2: Thermal Energy and the Second Law
    5
    • 2.1
      Why a Dark Roof Gets Hotter: Temperature, Thermal Energy and Heat
      50 mins
    • 2.2
      Specific Heat by the Method of Mixtures
      100 mins
    • 2.3
      Why Heat Flows Downhill: The Second Law and Engine Limits
      50 mins
    • 2.4
      Particles, Pressure, Heat Pumps and Insulating Materials
      100 mins
    • 2.5
      Performance Task — Keep It Cold in a Missouri Summer
      200 mins
  • Unit 3: Electricity and Magnetism
    5
    • 3.1
      Missouri Winter Sparks: Charge and Coulomb’s Law
      100 mins
    • 3.2
      Circuit Lab: Ohm’s Law, Series and Parallel with a Multimeter
      100 mins
    • 3.3
      Do Currents Make Magnetic Fields? Electromagnet Evidence and Argument
      100 mins
    • 3.4
      Fields, Induction and the Wind Turbines of Atchison County
      100 mins
    • 3.5
      Performance Task — Wind to Wire: Modeling a Transmission Link
      150 mins
  • Unit 4: Waves, Light and Information
    5
    • 4.1
      Seconds of Warning: Wave Speed and the New Madrid Seismic Zone
      50 mins
    • 4.2
      Investigation Lab: Standing Waves on a Stretched String
      100 mins
    • 4.3
      Argument Lab: Is Digital Always Better?
      50 mins
    • 4.4
      Light as Wave and Particle: Refraction, Photons and the Spectrum
      100 mins
    • 4.5
      Performance Task — Technical Brief: Waves That Carry Information and Energy
      150 mins
  • Unit 5: Missouri Physics Supplement
    3
    • 5.1
      Stars, Elements and the Big Bang
      50 mins
    • 5.2
      Earth’s Crust and Earth’s Story
      50 mins
    • 5.3
      Earth’s Energy and Feedbacks
      50 mins

Ramp Lab: Measuring Energy Transfer and Efficiency

Unit 1  ·  Investigation Lab  ·  Lesson 2 of 23

Ramp Lab: Measuring Energy Transfer and Efficiency

9-12.PS3.A.1RLP-PHYB
Ball rolling down a ramp past floor marks while a phone records its speed and spin.
By the end of this lesson I can…

measure a ball’s height and final speed on a ramp, compare mgh with its kinetic energy (including rolling energy), and calculate the efficiency with an uncertainty.

Instruction

The question. If a ball starts at rest a height h above the floor and rolls down a ramp, conservation of energy predicts mgh = ½mv2, so v = √(2gh), whatever the mass. Your lab tests that prediction and measures how much of the starting energy shows up as motion at the bottom. That ratio is the ramp’s efficiency, the same idea that decides how much of a pumped-storage plant’s energy comes back.

Measuring speed. Put two tape marks 1.00 m apart on the level floor right after the ramp. Time the ball between them and use v = d/t. A phone video is better than a stopwatch. At 30 frames per second, each frame is 1/30 s ≈ 0.033 s, so count frames between the marks. Human reaction time with a stopwatch is roughly ±0.15 s at each click. For a 0.63 s run, that is about 24% uncertainty, too large to test the model.

Worked example (illustrative numbers). A 0.060 kg ball is released from h = 0.20 m (measured vertically, from the release point to the floor). It crosses the 1.00 m level run in 19 frames, so t = 19/30 = 0.633 s and v = 1.00/0.633 = 1.58 m/s.

  • Starting energy: mgh = (0.060)(9.8)(0.20) = 0.1176 J.
  • Translational kinetic energy at the bottom: ½mv2 = ½(0.060)(1.58)2 = 0.0748 J.
  • Ratio: 0.0748 ÷ 0.1176 = 64%.

Has a third of the energy vanished? No. A rolling ball also spins, and spinning takes kinetic energy too. For a solid ball rolling without slipping, the total kinetic energy is (7/10)mv2, so only 5/7 ≈ 71% of it is in forward motion. The ideal rolling speed from 0.20 m is √(10gh/7) = 1.67 m/s, not √(2gh) = 1.98 m/s. Counting the spin, the ball has (0.7)(0.060)(1.58)2 = 0.1047 J, which is 89% of mgh. The remaining ~11% went to thermal energy and sound from rolling friction and air drag. A cart with light wheels spins very little, so for a cart ½mv2 is close to the whole kinetic energy.

Uncertainty. One frame either way changes t to 0.600 s or 0.667 s, so v lies between 1.50 and 1.67 m/s and ½mv2 between 0.0675 and 0.0833 J. Because speed is squared, a 5% timing error becomes about a 10% energy error. Repeat each height three times and average; use the spread of your trials as your uncertainty.

Graph it. Energy conservation says v2 is proportional to h. Plot v2 against h for four heights. With no losses, the slope would be 2g = 19.6 m/s2 for sliding and 10g/7 = 14.0 m/s2 for a rolling solid ball. The illustrative data below give a best-fit slope (through the origin) of 13.2 m/s2, which is 94% of the rolling ideal. A straight line through the origin supports the model. A slope below the ideal measures the losses.

0.10.20.30.42468height h (m)v² (m²/s²)slide, no friction: 2grolling ball: 10g/7

Common errors. Measuring h along the ramp instead of vertically; timing on the ramp while the ball is still speeding up; letting the ball bounce at the ramp’s foot; using a stopwatch on a short run.

📖 Read for this lesson

The reading opens over the lesson; close it to come back to exactly where you were. The checks below draw on it.

  • Energy on a Ramp: A Recorded Run of the Lab, Trial by TrialSLS constructed teaching data set (illustrative, not laboratory measurements) following the Lesson 1.2 procedure: 0.060 kg solid rubber ball, four heights, three trials each, 30 fps video over a 1.00 m run · about 4 min

    Three timed trials per height behind the lesson’s one-row-per-height table, plus a rolling cart comparison, so the v-squared-against-h analysis and the uncertainty question have real trial spread to work from.

Vocabulary in context

  • efficiency — Useful energy out divided by energy in, times 100%.
  • rotational kinetic energy — Kinetic energy of spinning; a rolling solid ball carries 2/7 of its kinetic energy this way.
  • uncertainty — The range within which the true value probably lies, estimated from instrument limits and the spread of repeated trials.
  • systematic error — An error that pushes every measurement the same way, such as measuring height along the slope.

Lab: Energy on a Ramp: Where Does mgh Go?

Question. How much of a ball’s starting gravitational potential energy becomes kinetic energy at the bottom of a ramp, and where does the rest go?

Materials

  • A ramp about 1 m long (a shelf board, cardboard track or a length of vinyl rain gutter) propped on books
  • A solid ball (rubber, golf or large marble) or a low-friction toy cart
  • Meter stick or tape measure; masking tape for marks
  • Phone camera (30 fps or slow motion) or a stopwatch
  • Kitchen scale reading to 1 g
  • A box or folded towel to stop the ball
Safety.
  • Wear safety goggles: balls can bounce off the ramp or floor at speed.
  • Work on the floor or clamp the ramp; put a box at the end of the run so balls do not roll into walkways.
  • Keep the stack of books stable and low; do not stand on chairs to raise the ramp.

Procedure

  1. Measure and record the ball’s mass. Tape two marks exactly 1.00 m apart on the level floor, starting about 10 cm past the foot of the ramp.
  2. Set the ramp so the release point is 0.10 m above the floor, measured vertically with the meter stick. Mark the release point so every trial starts from the same place.
  3. Release the ball from rest (do not push). Film from the side so both marks are in view, with the phone held still. Do three trials.
  4. Count the frames between the ball crossing the first and second marks in each video (or time with a stopwatch if no camera). Record all trials.
  5. Repeat for heights of 0.20, 0.30 and 0.40 m.
  6. For each height, average the times, compute v, v2, mgh and ½mv2, and record the ratio. If you have a cart, repeat one height with it for comparison.

Data

Height h (m)Frames over 1.00 m (30 fps)Time t (s)Speed v = d/t (m/s)mgh (J)½mv2 (J)½mv2 ÷ mgh
0.10270.9001.110.05880.037063%
0.20190.6331.580.11760.074864%
0.30150.5002.000.17640.120068%
0.40130.4332.310.23520.159868%
Rows above are illustrative sample data for a 0.060 kg solid rubber ball. Replace them with your own averages of three trials per height.

Analysis

  1. Claim-evidence-reasoning: Is energy conserved on your ramp? State a claim, cite your ratios and your v2-versus-h graph as evidence, and reason using the rolling-ball model and the thermal energy produced by friction.
  2. Graph v2 against h and find the best-fit slope through the origin. Compare it with 2g = 19.6 m/s2 and 10g/7 = 14.0 m/s2. Which model fits better, and what does the difference measure?
  3. Uncertainty: from the spread of your three trials at one height, estimate the uncertainty in v and in ½mv2. Is the gap between mgh and the kinetic energy larger than your uncertainty?
  4. Sources of error: name two systematic errors (for example, measuring h along the slope, or the ball slowing on the floor before the marks) and say which way each would shift your ratio.

If you cannot do this lab in person: Choose one. All three earn full credit and end in the same v2-against-h graph, the same fitted slope and the same efficiency discussion. Option A — run your own ramp. The procedure above. A shelf board, a length of vinyl gutter or a sheet of cardboard folded into a channel all work, and a stopwatch will do if you use the longest level run you can measure. Option B — the illustrative data in the table above. No equipment and no internet needed. The four rows (heights 0.10, 0.20, 0.30 and 0.40 m for a 0.060 kg solid rubber ball, timed at 30 fps over a 1.00 m level run) are a complete data set. Compute v, v2, mgh and ½mv2 yourself, graph v2 against h, and fit a line through the origin: you should get about 13.2 m/s2, which is 94% of the rolling ideal 10g/7 = 14.0 m/s2 and well below the sliding ideal 2g = 19.6 m/s2. Answer every analysis question from these rows. For the uncertainty question, use ±1 frame at 30 fps in place of the spread of three trials, and explain why that is the weaker of the two estimates. Option C — PhET Energy Skate Park. The PhET simulation is at phet.colorado.edu/sims/html/energy-skate-park/latest/energy-skate-park_all.html. On the Intro screen, turn on the bar graph, the speedometer and the grid, and set friction to zero. Release the skater from 1, 2, 3 and 4 m and record the speed at the bottom each time. Graph v2 against h and fit a line through the origin: with no friction and no spinning wheels the slope should come out near 2g = 19.6 m/s2. Then set friction to a value you write down, repeat all four heights, and report the new slope as an efficiency (new slope ÷ 19.6). Answer every analysis question from those two sets, and in the sources-of-error question explain what the simulation leaves out that a real rolling ball does not. Cite the sim and the date you used it.

Formative check

Work through these before moving on. They are not graded — they tell you whether the standard below has landed yet.

+50 XP

A ball crosses a 1.00 m level run in 19 video frames at 30 frames per second. What is its speed?

t = 19/30 = 0.633 s; v = d/t = 1.00/0.633 = 1.58 m/s.
Fill in the blank

For a 0.060 kg ball released from 0.20 m, mgh = J; at 1.58 m/s its translational KE is J.

Myth or Fact?

If ½mv2 at the bottom is only about 64% of mgh for a rolling ball, energy conservation has failed.

A rolling solid ball keeps 2/7 of its kinetic energy as spin, and friction converts some energy to thermal energy and sound. Counting spin, the illustrative ball kept about 89% of mgh as kinetic energy.

Post your v2-versus-h graph and slope. Explain in 4-6 sentences whether the sliding model (2g) or the rolling model (10g/7) fits your data better, state your uncertainty, and name the largest source of error with the direction it would push your result.

0 words
Quick self-check

How confident are you that you can measure speed and height on a ramp, compare mgh with kinetic energy, and report an efficiency with its uncertainty?

Not yetVery confident

Practice

Work these on paper or in your notebook, then open Check your answer. Aim for all of Fluency and Application; try at least one Challenge.

Printable version: this unit’s practice workbook (PDF)

Fluency

Build speed and accuracy with the core skill.

  1. A device takes in 3600 J and delivers 1724 J of useful energy. What is its efficiency, and where did the rest go?
    Check your answer
    Answer: 47.9%; the other 1876 J was transferred mostly as thermal energy to the surroundings
    Efficiency = useful output / input × 100%.
  2. A device takes in 1200 J and delivers 416 J of useful energy. What is its efficiency, and where did the rest go?
    Check your answer
    Answer: 34.7%; the other 784 J was transferred mostly as thermal energy to the surroundings
    Efficiency = useful output / input × 100%.
  3. A device takes in 500 J and delivers 393 J of useful energy. What is its efficiency, and where did the rest go?
    Check your answer
    Answer: 78.6%; the other 107 J was transferred mostly as thermal energy to the surroundings
    Efficiency = useful output / input × 100%.
  4. A ball is released from rest 45 m above the ground. Use conservation of energy (ignore air resistance) to find its speed just before impact.
    Check your answer
    Answer: 29.7 m/s
    mgh = ½mv2, so v = √(2gh); mass cancels.
  5. A ball crosses a 1.00 m level run in 20 frames of 30 fps video. Find its speed.
    Check your answer
    Answer: 1.50 m/s
    t = 20/30 s; v = d/t.
  6. A 0.060 kg ball is released 0.25 m above the floor and reaches the speed above. Find mgh, ½mv2 and their ratio.
    Check your answer
    Answer: 0.1470 J; 0.0675 J; 46%
    Compare starting and final energy.

Application

Use the skill in context. Show your reasoning.

  1. Include rolling for the same ball: a solid ball’s total kinetic energy is 0.7mv2. What fraction of mgh does the ball keep, and what is the ideal rolling speed from 0.25 m?
    Check your answer
    Answer: 64%; 1.87 m/s
    0.7(0.060)(1.50)2 = 0.0945 J; ideal v = √(10gh/7).
  2. A v2-versus-h graph for a rolling ball has slope 13.2 m/s2. Compare it with the rolling ideal 10g/7 and state the efficiency.
    Check your answer
    Answer: 94%
    10g/7 = 14.0; 13.2/14.0 = 0.943.
  3. With a stopwatch (±0.15 s) instead of video, a 0.67 s run has what percent timing uncertainty, and roughly what percent uncertainty in kinetic energy?
    Check your answer
    Answer: 22% and about 45%
    0.15/0.67; KE ∝ 1/t2 doubles the percentage.

Challenge

Stretch problems. Expect to think before you write.

  1. A student measures h along the ramp’s slope (0.50 m) instead of vertically (0.25 m). What efficiency would they report for the ball above, and why is it wrong?
    Check your answer
    Answer: 23% instead of 46%
    Doubling h doubles mgh and halves the apparent efficiency; gravitational energy depends only on vertical height.

Review

Keep earlier skills sharp.

  1. A net force of 3.0 N acts on a 2 kg object. What is its acceleration?
    Check your answer
    Answer: 1.50 m/s2
    a = Fnet/m.
  2. A 20 kg box is pushed with 41 N to the right against 19 N of friction. Find the net force and the acceleration.
    Check your answer
    Answer: net force 22 N to the right; a = 1.10 m/s2
    Add forces as vectors: the net force is the applied force minus friction.

Missouri Learning Standards — Science addressed: 9-12.PS3.A.1, SEP.3, SEP.4, SEP.5, CCC.5, RST.11-12.3, MP.4

Instructional focus: Hands-on measurement of energy conversion with uncertainty analysis

Reading

Energy on a Ramp: A Recorded Run of the Lab, Trial by Trial

SLS constructed teaching data set (illustrative, not laboratory measurements) following the Lesson 1.2 procedure: 0.060 kg solid rubber ball, four heights, three trials each, 30 fps video over a 1.00 m run · SLS original

Why this reading. The lesson’s Option B hands you four averaged rows and asks you to trust them. A real lab produces trials, not averages, and the analysis questions (“from the spread of your three trials”) need the trials. Below is a complete recorded run of the lesson’s own procedure: a 0.060 kg solid rubber ball, four release heights, three trials each, timed by counting video frames at 30 frames per second across a 1.00 m level run, plus one cart run for comparison. The numbers are SLS teaching data constructed to behave like a real ramp, with the kind of frame-to-frame scatter a phone camera gives. They are labeled illustrative and are not measurements from any named laboratory. Every average below reproduces the lesson’s table, so you can check your arithmetic against it.

Setup

Ramp: a 1.2 m shelf board on books. Ball: solid rubber, mass 60.0 g on a kitchen balance reading to 1 g (so m = 0.060 ± 0.0005 kg). Release height measured vertically from the ball’s center at release to the floor, with the meter stick held plumb. Tape marks 1.00 m apart, the first 10 cm past the foot of the ramp. Camera: phone at 30 fps on a stack of books, both marks in frame. Room temperature 21 °C.

Table 1. Frame counts, three trials per height

h (m)Frames, trials 1-3Mean framest = mean/30 (s)v = 1.00/t (m/s)v2 (m2/s2)mgh (J)½mv2 (J)½mv2 ÷ mgh
0.1027, 28, 2627.00.9001.111.230.05880.037063%
0.2019, 20, 1819.00.6331.582.490.11760.074864%
0.3015, 14, 1615.00.5002.004.000.17640.120068%
0.4013, 14, 1213.00.4332.315.330.23520.159868%

Cart check at h = 0.20 m: a 0.080 kg toy cart with light plastic wheels crossed the marks in 16, 16 and 17 frames (mean 16.3), so t = 0.544 s, v = 1.84 m/s, ½mv2 = 0.135 J against mgh = 0.157 J: 86%. The cart keeps more of its energy as forward motion than the ball does, because almost none of it is spent spinning wheels.

Worked analysis

Speed from frames. At 0.20 m the mean is 19.0 frames: t = 19.0/30 = 0.633 s and v = 1.00/0.633 = 1.58 m/s, the lesson’s worked example. mgh = (0.060)(9.8)(0.20) = 0.1176 J and ½mv2 = ½(0.060)(1.58)2 = 0.0748 J, a ratio of 64%.

Slope of v2 against h. A best-fit line through the origin has slope Σ(h·v2) ÷ Σh2. From Table 1: (0.10)(1.23) + (0.20)(2.49) + (0.30)(4.00) + (0.40)(5.33) = 3.95, divided by 0.01 + 0.04 + 0.09 + 0.16 = 0.30, gives 13.2 m/s2. That is 94% of the rolling ideal 10g/7 = 14.0 m/s2 and 67% of the sliding ideal 2g = 19.6 m/s2. The rolling model fits; the 6% shortfall is the loss to rolling friction, air and the small bounce at the ramp’s foot.

Counting the spin. For a rolling solid ball the total kinetic energy is (7/10)mv2. At 0.20 m that is (0.7)(0.060)(2.49) = 0.105 J, or 89% of mgh; at the four heights the rolling totals are 88%, 89%, 95% and 95% of mgh. Energy is not missing; it is in the spin and, for the rest, in thermal energy.

Uncertainty from the spread. At 0.20 m the trials ran 18 to 20 frames, so t ranges from 0.600 to 0.667 s, v from 1.50 to 1.67 m/s and ½mv2 from 0.0675 to 0.0833 J: about ±0.008 J, or ±11%, around 0.0748 J. The gap between mgh (0.1176 J) and the translational kinetic energy (0.0748 J) is 0.043 J, five times the uncertainty, so it is real and needs the rolling explanation. The lesson’s ±1-frame estimate gives the same range here because the spread happens to be one frame each way; with more trials the spread is the better estimate, because it includes release and camera errors that a frame count alone does not.

Systematic errors, and their direction. Measuring h along the board instead of vertically makes h too large and the ratio too small. Starting the count before the ball reaches the first mark makes t too long and v too small. A ball that has already slowed on the floor before the marks gives a v below the bottom-of-ramp speed, again lowering the ratio. All three push the same way, which is one reason ratios below 5/7 are common.

Your turn

  1. Recompute every column of Table 1 from the frame counts. Two rows have been rounded in the ratio column; report them to one decimal place.
  2. Plot v2 against h with the two reference lines and your fitted line. State whether any point lies more than one uncertainty from the fitted line.
  3. Compute the spread-based uncertainty at 0.40 m (12 to 14 frames) as a percentage. Why is the percentage larger than at 0.20 m even though the time scatter is the same one frame?
  4. Using the cart result, explain in two sentences why a cart and a ball released from the same height reach different speeds although both obey conservation of energy.
Up NextComplete & Continue →

Leave a Reply Cancel reply

Pumped Storage: Work, Kinetic and Potential Energy
Prev
Where Did the Energy Go? Springs, Rubber Bands and Thermal Energy
Next

© 2026 The VR School | Career content by Wiley | Powered by Sejal Learning Systems.

Join free · Accreditation · Privacy Policy · Terms of Service

Modal title

Main Content