
measure a ball’s rebound heights, build a spreadsheet model that calculates the energy of the ball after each bounce, and argue where the energy that leaves the ball goes.
Instruction
The observation. Drop a tennis ball from 1.00 m and it bounces back to perhaps 55-60 cm, then lower, then lower still, until it rolls to a stop. Energy is conserved, yet the ball clearly has less of it each bounce. Where does it go? This lesson uses a computational model, a spreadsheet, to track the energy of one part of the system when the energy changes of the other parts are known (9-12.PS3.A.1).
Measuring. Tape a meter stick or a tape measure to a wall. Drop the ball from 1.00 m and film it on a phone, then step through the video to read the height of each rebound at its highest point. Three drops, averaged. Illustrative data for one ball: 100, 72, 52 and 37 cm.
From heights to energy. At the top of each bounce the ball is momentarily at rest, so all its mechanical energy is gravitational potential energy, mgh. For a 0.058 kg tennis ball dropped from 1.00 m: 0.058 × 9.8 × 1.00 = 0.568 J. If it rises to 0.55 m, it has 0.058 × 9.8 × 0.55 = 0.313 J. So 0.568 − 0.313 = 0.255 J left the ball during that one bounce.
Finding the pattern. Divide each height by the one before it. For the illustrative data: 72 ÷ 100 = 0.72, 52 ÷ 72 = 0.72, 37 ÷ 52 = 0.71. The ball keeps about the same fraction of its energy each bounce, here about 72%. That constant fraction is the heart of the model: if the fraction is f, each height is f times the previous height.
Building the spreadsheet model. Column A: bounce number 0, 1, 2, … Column B: height. Put the drop height in B2 (1.00), then in B3 type =B2*$E$1, where E1 holds the fraction f, and fill down. Column C: energy of the ball, =0.058*9.8*B2. Column D: energy transferred out at each bounce, =C2−C3. Change f in E1 and the whole model updates. A ball with f = 0.64 dropped from 100 cm is predicted to reach 64, 41, 26, 17 and 11 cm. Graph height against bounce number and overlay your measurements: if the model is good, the points sit on the curve.
Where the energy goes. During each bounce the ball and the floor squash and spring back. Not all the elastic energy returns: some becomes thermal energy (the ball and floor warm very slightly), and some becomes sound (you hear the bounce). A little is lost to air resistance on the way up and down. Add those up and you account for the whole difference. Energy is conserved for the system of ball, floor and air, even though the ball alone loses energy. The same accounting explains why a skateboarder with friction never quite reaches the starting height, and why pumped storage returns less than it takes.
Building the argument. Your claim should say where the ball’s energy goes and that total energy is conserved. Evidence: the measured heights, the energy calculations, and the model’s fit (RST.9-10.7: the graph and the table should tell the same story). Reasoning: energy transfers between objects and into thermal energy and sound. Expect the counter-claim “the energy just runs out” and answer it by naming the other parts of the system.
📖 Read for this lesson
The reading opens over the lesson; close it to come back to exactly where you were. The checks below draw on it.
Formative check
Work through these before moving on. They are not graded — they tell you whether the standard below has landed yet.
A ball dropped from 100 cm keeps 64% of its energy each bounce. The model predicts the second rebound height is
In the spreadsheet, if B2 holds 1.00 and E1 holds 0.72, the formula =B2*$E$1 in B3 gives .
The bouncing ball shows that energy is not conserved.
Write a 5-7 sentence argument about where the ball’s energy goes. Include your measured retention fraction, one energy calculation, how well your model fits your data, and a rebuttal to ‘the energy just runs out.’
How confident are you that you can build a spreadsheet model of energy in a system and argue where transferred energy goes?
Practice
Work these on paper or in your notebook, then open Check your answer. Aim for all of Fluency and Application; try at least one Challenge.
Printable version: this unit’s practice workbook (PDF)
Fluency
Build speed and accuracy with the core skill.
- A device takes in 2000 J and delivers 1030 J of useful energy. What is its efficiency, and where did the rest go?
Check your answer
Answer: 51.5%; the other 970 J was transferred mostly as thermal energy to the surroundingsEfficiency = useful output / input × 100%. - A device takes in 1200 J and delivers 395 J of useful energy. What is its efficiency, and where did the rest go?
Check your answer
Answer: 32.9%; the other 805 J was transferred mostly as thermal energy to the surroundingsEfficiency = useful output / input × 100%. - A device takes in 1200 J and delivers 453 J of useful energy. What is its efficiency, and where did the rest go?
Check your answer
Answer: 37.8%; the other 747 J was transferred mostly as thermal energy to the surroundingsEfficiency = useful output / input × 100%. - A ball dropped from 1.5 m keeps 80% of its energy each bounce. Predict its first three rebound heights.
Check your answer
Answer: 1.2 m, 0.96 m, 0.77 m1.5 × 0.8 = 1.2; × 0.8 = 0.96; × 0.8 = 0.768. - A ball rebounds to 0.78 m after being dropped from 1.20 m. What fraction of its energy did it keep?
Check your answer
Answer: 0.65 (65%)Energy is proportional to height at the top: 0.78 ÷ 1.20. - Write a spreadsheet formula for cell B3 that multiplies B2 by the retention fraction stored in cell E1, so that it can be filled down.
Check your answer
Answer: =B2*$E$1The $ signs keep the reference to E1 fixed when the formula is copied down.
Application
Use the skill in context. Show your reasoning.
- A 0.057 kg ball dropped from 1.20 m rebounds to 0.78 m. Calculate its potential energy at each height and the energy transferred out of the ball in the bounce. Name where that energy went.
Check your answer
Answer: 0.670 J and 0.436 J; 0.234 J transferred, mostly to thermal energy in the ball and floor and to sound (a little to air resistance).0.057 × 9.8 × 1.20 = 0.670; 0.057 × 9.8 × 0.78 = 0.436; difference 0.234 J. - Illustrative data: 100, 72, 52, 37 cm. Show that the retention fraction is roughly constant and use the average to predict the fifth height (after the fourth bounce).
Check your answer
Answer: Ratios 0.72, 0.72, 0.71, average about 0.72. Predicted next height: 37 × 0.72 ≈ 27 cm.72/100 = 0.72; 52/72 = 0.722; 37/52 = 0.712. - A friend says, ‘The ball stops bouncing because its energy runs out.’ Rewrite the statement so that it is scientifically accurate.
Check your answer
Answer: The ball stops bouncing because at every bounce some of its mechanical energy is transferred to thermal energy in the ball, floor and air and to sound. The total energy of the system is conserved; the ball’s share keeps decreasing.
Challenge
Stretch problems. Expect to think before you write.
- What retention fraction would make a ball dropped from 100 cm reach 50 cm on its second bounce? Test your answer with the model.
Check your answer
Answer: About 0.71f2 = 0.50, so f = √0.50 = 0.707. Check: 100 × 0.707 = 70.7; 70.7 × 0.707 = 50.0.
Review
Keep earlier skills sharp.
- An object is dropped from rest 5 m above the ground. Ignoring air resistance (g = 9.8 m/s2), how long does it fall and how fast is it moving at impact?
Check your answer
Answer: 1.01 s; 9.9 m/sh = ½gt2; v = gt. - Predict the final temperature when 100 g of water at 50 °C is mixed with 300 g at 10 °C.
Check your answer
Answer: 20 °C(5,000 + 3,000) ÷ 400 = 20.
Nine Drops, Three Balls: The Rebound Record, the Model Table, and the Published Bounce Standard
Rebound heights of three balls dropped three times each from 1.00 m onto a tiled floor at home, read from 240 frame-per-second phone video against a taped meter stick, constructed for this course and illustrative; ITF Rules of Tennis, Appendix I, Table 1 (Tennis Ball Specification), as reproduced in USTA, 2023 USTA Tennis Ball Testing procedures (updated May 2023); University of Illinois Physics Van, Tennis Ball Pressure, for the 100-inch drop; retrieved November 5, 2026 · SLS original (constructed teaching data, with computed model values); the ball specification figures are quoted as published facts
Why this reading. The lesson’s argument needs three things: measured rebound heights, a retention fraction, and a model that predicts each bounce so you can say how well it fits. If you have a ball, a meter stick or tape measure and a phone, collect your own; if you do not, here is a full record for three balls, with the model worked, so that every sentence of the argument has a number behind it. The record is constructed teaching data and is labeled illustrative. The one thing in it that is not illustrative is the tennis-ball standard, which lets you check whether a tennis ball’s record is believable.
Procedure that produced the record
A home hallway: meter stick taped to a wall above a tiled floor; each ball released from rest with its bottom at 100 cm; phone filming at 240 frames per second from 3 m away, level with the 50 cm mark; the highest point of each of the first four rebounds read from the frames to the nearest centimeter. Three drops per ball, n = 9 drops, 36 rebound readings.
Table 1. Rebound heights (cm)
| Ball | Drop | Release height | Rebound 1 | Rebound 2 | Rebound 3 | Rebound 4 |
|---|---|---|---|---|---|---|
| Tennis ball, 58 g | 1 | 100 | 57 | 33 | 19 | 11 |
| 2 | 100 | 55 | 31 | 18 | 10 | |
| 3 | 100 | 56 | 32 | 18 | 10 | |
| average | 100 | 56.0 | 32.0 | 18.3 | 10.3 | |
| Rubber playground ball, 92 g | 1 | 100 | 72 | 52 | 37 | 27 |
| 2 | 100 | 73 | 52 | 38 | 27 | |
| 3 | 100 | 71 | 51 | 37 | 26 | |
| average | 100 | 72.0 | 51.7 | 37.3 | 26.7 | |
| Solid “high-bounce” ball, 40 g | 1 | 100 | 80 | 64 | 51 | 41 |
| 2 | 100 | 81 | 65 | 52 | 42 | |
| 3 | 100 | 79 | 63 | 50 | 40 | |
| average | 100 | 80.0 | 64.0 | 51.0 | 41.0 |
Table 2. Retention fractions and the first bounce’s energy
Each fraction is a height divided by the height before it. Energy at the top of a bounce is mgh, with h in meters.
| Ball | h1/h0 | h2/h1 | h3/h2 | h4/h3 | Mean f | Energy at release (J) | Energy at top of bounce 1 (J) | Left the ball in bounce 1 (J) |
|---|---|---|---|---|---|---|---|---|
| Tennis ball, 58 g | 0.56 | 0.57 | 0.57 | 0.56 | 0.57 | 0.568 | 0.318 | 0.250 |
| Rubber playground ball, 92 g | 0.72 | 0.72 | 0.72 | 0.71 | 0.72 | 0.902 | 0.649 | 0.252 |
| Solid “high-bounce” ball, 40 g | 0.80 | 0.80 | 0.80 | 0.80 | 0.80 | 0.392 | 0.314 | 0.078 |
Work the tennis ball. 0.058 × 9.8 × 1.00 = 0.568 J at release; at its 56 cm average first rebound, 0.058 × 9.8 × 0.56 = 0.318 J; so 0.250 J left the ball in one bounce. The lesson’s worked example uses a 55 cm rebound and gets 0.313 J and 0.255 J; one centimeter of rebound is 0.006 J, which is the precision of this record.
The fraction is nearly constant for each ball, and different between balls. That is the heart of the model. The playground ball keeps about 72% of its energy each bounce (the lesson’s illustrative 100, 72, 52, 37 is this ball); the tennis ball about 57%; the solid ball about 80%. Within a ball, the four fractions differ by only a few hundredths, which is what you expect if each bounce loses the same share of whatever energy arrives.
Table 3. The spreadsheet model for f = 0.64, tennis-ball mass
Column B: height, each row 0.64 times the row above. Column C: energy of the ball, 0.058 × 9.8 × height. Column D: energy transferred out at the next bounce, C(this row) − C(next row).
| Bounce number | Height (cm) | Energy of ball at top (J) | Transferred out at next bounce (J) |
|---|---|---|---|
| 0 | 100.0 | 0.568 | 0.205 |
| 1 | 64.0 | 0.364 | 0.131 |
| 2 | 41.0 | 0.233 | 0.084 |
| 3 | 26.2 | 0.149 | 0.054 |
| 4 | 16.8 | 0.095 | 0.034 |
| 5 | 10.7 | 0.061 | 0.022 |
The heights 64.0, 41.0, 26.2, 16.8, 10.7 are the lesson’s 64, 41, 26, 17 and 11, and the quiz’s second rebound of 41 cm is row 2. The fill-in check is the first step: B2 = 1.00 and E1 = 0.72 gives B3 = 0.72. Notice column D shrinks every row: the ball loses the same fraction but a smaller amount each time, which is why the bounces come faster and faster near the end and then merge into rolling.
How well does the model fit? A worked comparison
Take the playground ball’s mean fraction, 0.72, and predict from 100 cm: 72.0, 51.8, 37.3, 26.9 cm. The measured averages are 72.0, 51.7, 37.3, 26.7. The largest miss is 0.2 cm, smaller than the reading precision. For the tennis ball, using its first-bounce fraction of 0.56: predicted 56.0, 31.4, 17.6, 9.8; measured 56.0, 32.0, 18.3, 10.3. Misses of up to 0.7 cm, all in the same direction: the tennis ball’s real fraction rises slightly at low heights, because a softer impact squashes it less and loses proportionally less. A model can be good and still have a pattern in its misses; naming the pattern is what turns a fit into an argument.
The published check
The International Tennis Federation’s Rules of Tennis, Appendix I, set the specification every approved ball must meet. The table, as reproduced in the U.S. Tennis Association’s 2023 ball-testing procedures, gives the standard ball (Type 2, medium) a mass of “56.0-59.4 grams” and a rebound of “53-58 inches (135-147 cm).” The test drop is 100 inches (254 cm) onto concrete; as the University of Illinois Physics Van puts it, “a ball dropped from a height of 100 inches must rebound between 53 and 58 inches.” Divide: 135 ÷ 254 = 0.53 and 147 ÷ 254 = 0.58. A legal tennis ball keeps between 53% and 58% of its energy in a first bounce on concrete. The record above found 0.56 to 0.57 on tile, inside the range, and the ball’s 58 g is inside the mass range. When a published standard and a home record agree, say so; when they do not, the standard tells you which to doubt first.
Where the energy goes
In the tennis ball’s first bounce, 0.250 J left the ball. It did not vanish. During the roughly 5 milliseconds of contact the ball flattened and sprang back, and rubber is not a perfect spring: part of the work of flattening it stays behind as thermal energy in the rubber and the felt (a ball bounced for a minute is measurably warmer). Part left as sound, the thump you hear. A small part went to the air on the way up and down. Add those three and you account for the 0.250 J; the system of ball, floor and air conserved energy while the ball alone did not. That is the claim, and “the energy just runs out” is answered by naming where it went.
Your turn
- Build the spreadsheet for the solid ball with its mean fraction and its 0.040 kg mass, and compare the predicted heights with Table 1.
- For each ball, compute the energy transferred out in bounce 1 per gram of ball. Which ball loses the most energy per gram, and does that match the ranking by fraction? Explain the difference.
- Write the 5-7 sentence argument the lesson asks for, using one ball’s fraction, one energy calculation, the size of the model’s largest miss, and the rebuttal.
Sources: USTA, 2023 USTA Tennis Ball Testing (application procedures, reproducing ITF Rules of Tennis Appendix I, Table 1) (preview.usta.com); University of Illinois Physics Van, Ask the Van: Tennis Ball Pressure (van.physics.illinois.edu)