THE VR SCHOOL
  • Schools & Districts
    • License the academy
    • Free program for your students
    • Request a demo
  • Catalog
    • AI & Data
    • Cybersecurity & Web
    • Programming
    • Health Science
    • All Guilds
    • All courses
  • Families
  • Accreditation
  • Log In
  • Request a demo
  • Home
  • Courses

RLP Physical Science B — Forces, Energy and Waves

Curriculum

  • 5 Sections
  • 23 Lessons
  • 10 Weeks
Expand all sectionsCollapse all sections
  • Unit 1: Motion, Forces and Collision Safety
    5
    • 1.1
      Crash Cushions at the Off-Ramp
      50 mins
    • 1.2
      Newton’s Second Law with Carts
      100 mins
    • 1.3
      Momentum Before and After a Collision
      50 mins
    • 1.4
      Impulse: Stretching the Stop
      100 mins
    • 1.5
      Performance Task — Crash Cushion Design Challenge
      200 mins
  • Unit 2: Gravity, Electricity and Magnetism
    5
    • 2.1
      Satellites Over Missouri: Gravity at a Distance
      50 mins
    • 2.2
      Electromagnets and Moving Magnets
      100 mins
    • 2.3
      Coulomb’s Law: Electric Force Versus Gravity
      50 mins
    • 2.4
      Energy in Fields: Motors and Generators
      50 mins
    • 2.5
      Performance Task — From Wind to Wire
      150 mins
  • Unit 3: Energy Conservation and Transformation
    5
    • 3.1
      Storing Sunshine by Pumping Water Uphill
      50 mins
    • 3.2
      Mixing Hot and Cold Water
      100 mins
    • 3.3
      Where Did the Energy Go? Modeling Bouncing Balls
      50 mins
    • 3.4
      Designing a Solar Oven
      100 mins
    • 3.5
      Performance Task — Energy Device Design Report
      200 mins
  • Unit 4: Waves and Information
    5
    • 4.1
      Warning Before the Shaking
      50 mins
    • 4.2
      Waves on a Spring
      100 mins
    • 4.3
      Wave or Particle? Light, Photons and Health Claims
      100 mins
    • 4.4
      Digital Signals and the Devices That Carry Them
      50 mins
    • 4.5
      Performance Task — Earthquake Early-Warning Technical Explainer
      150 mins
  • Unit 5: Missouri Physical Science Supplement
    3
    • 5.1
      The Sun and the Universe: Fusion, Redshift and the Big Bang
      50 mins
    • 5.2
      Predicting Orbits with Kepler’s Laws
      50 mins
    • 5.3
      Earth’s Engine and Energy Budget
      50 mins

Newton’s Second Law with Carts

Unit 1  ·  Investigation Lab  ·  Lesson 2 of 23

Newton’s Second Law with Carts

9-12.PS2.A.1RLP-PSB
Toy cart carrying washers rolls across a table while hanging washers pull it over the edge.
By the end of this lesson I can…

measure the acceleration of a cart for several net forces at constant mass, graph acceleration against force, and use the graph to support Newton’s second law.

Instruction

The investigation question. Newton’s second law claims that acceleration is proportional to net force when mass stays the same. 9-12.PS2.A.1 asks you to analyze data to support that claim. Today you collect the data at home.

The set-up. A smooth-rolling toy truck or car (the “cart”) sits on a level table. A string runs from the cart over the smooth, rounded edge of the table (covered with tape so the string slides easily) to a paper-clip hanger holding washers from a hardware store. When released, the falling washers pull the cart. The pulling force is the weight of the hanging washers: weight = mg, so 0.050 kg of washers pull with 0.050 × 9.8 = 0.49 N.

The trick for constant mass. The cart and the hanging washers accelerate together, so the mass being accelerated is the whole system: cart plus all the washers. If you just added washers to the hanger, you would change both the force and the mass. Instead, start with all the washers on the cart, then move them one group at a time from the cart to the hanger. The total mass stays constant (say 0.600 kg) while the force increases. This is controlling a variable by design.

Measuring acceleration. The cart starts from rest and accelerates steadily, so the distance it travels is d = ½at2. Rearranged: a = 2d ÷ t2. Mark a 1.00 m run, release the cart from rest and time it. Worked example: a run of 1.00 m in 1.14 s gives a = 2(1.00) ÷ 1.142 = 2 ÷ 1.30 = 1.54 m/s2. Timing by hand on a phone stopwatch has a reaction-time error of about 0.1-0.2 s, which matters a lot when the time is only one second; so time each run three times and average, or film it on a phone and read the time from the video.

What to expect. With a total mass of 0.600 kg and no friction, the prediction is a = F ÷ 0.600. Illustrative results from one trial run:

Hanging mass (kg)Net force (N)Average time for 1.00 m (s)a = 2d/t2 (m/s2)
0.0500.491.660.73
0.1000.981.141.54
0.1501.470.932.31
0.2001.960.803.13

Reading the graph. Plot acceleration (y) against net force (x). The points fall close to a straight line. A best-fit line through these illustrative data has slope 1.63 and a small negative intercept (about −0.07 m/s2). A straight line means acceleration is proportional to force, the claim. The slope is 1 ÷ mass, so the mass from the graph is 1 ÷ 1.63 = 0.61 kg, close to the 0.600 kg on the kitchen scale. The small negative intercept is evidence of friction: a little of the pulling force goes to overcoming friction before the cart accelerates. Naming that is part of a good analysis.

Safety. Wear safety glasses: a snapping string can flick washers. Put a towel-lined box where the washers land and a book at the end of the table so the cart does not fall. Keep small children and pets away from the falling washers.

📖 Read for this lesson

The reading opens over the lesson; close it to come back to exactly where you were. The checks below draw on it.

  • The Cart Runs, Recorded: Two Complete Data Sets for Acceleration Against Net ForceTwo recorded runs of the Lesson 1.2 home procedure (toy truck plus washers, total mass 0.600 kg, 1.00 m timed run, three hand-timed trials per hanging mass); constructed for this course and illustrative; best-fit lines computed by least squares from the tabulated averages (recomputed November 5, 2026) · about 5 min

    Two full recorded runs of the toy-truck-and-washers procedure, three hand-timed trials per hanging mass with the fit worked, so the acceleration-versus-net-force lab can be completed from data or checked against a second complete set.

Vocabulary in context

  • system — The set of objects chosen for analysis; here the cart and all the washers together.
  • proportional — Two quantities are proportional when one is a constant multiple of the other; their graph is a straight line through the origin.
  • best-fit line — The straight line that passes as close as possible to all the data points on a graph.
  • weight — The gravitational force on an object, equal to its mass times 9.8 m/s2 near Earth’s surface.

Lab: Acceleration and Net Force at Constant Mass

Question. How does a cart’s acceleration change when the net force on it increases while the total mass stays the same?

Materials

  • A smooth-rolling toy truck or car, a kitchen scale, and 8-10 identical steel washers (about 25 g each, from a hardware store) with a paper-clip hanger
  • String about 1.5 m long and a table with a smooth rounded edge covered with tape (the edge acts as the pulley)
  • Tape measure or meter stick, masking tape, and a phone stopwatch or phone camera
  • A towel-lined box to catch the washers and a book as an end stop
  • Safety glasses
Safety.
  • Wear safety glasses: a snapping string or a flying washer can reach eye level.
  • Place the towel-lined box under the falling washers and a book at the end of the table so neither the cart nor the washers fall on feet.
  • Keep the floor around the table clear, and keep small children and pets away during runs (washers are a choking hazard).

Procedure

  1. Weigh the cart and all the washers together on the kitchen scale; this total mass stays the same throughout. Put 2 washers on the hanger and the rest on (or taped to) the cart.
  2. Mark a start line and a finish line 1.00 m apart on a level table. Hold the cart at the start with the string taut, release it from rest, and time it to the finish. Repeat for three runs and average.
  3. Move 2 more washers from the cart to the hanger and repeat step 2. Continue until you have at least four different hanging masses.
  4. For each run calculate net force = hanging mass × 9.8 and acceleration = 2 × 1.00 ÷ (average time)2.
  5. Plot acceleration against net force, draw a best-fit straight line, and find its slope.
  6. Calculate 1 ÷ slope and compare it with the total mass you measured.

Data

Hanging mass (kg)Net force (N)Time 1 (s)Time 2 (s)Time 3 (s)Average time (s)Acceleration (m/s2)

Total mass of cart + all washers: ______ kg

Analysis

  1. Claim: how is acceleration related to net force at constant mass? Evidence: your graph and best-fit line. Reasoning: explain what a straight line through (or near) the origin means and how it supports F = ma.
  2. Compare 1 ÷ slope with the measured total mass. Calculate the percentage difference and suggest why they differ.
  3. Your line probably crosses the force axis slightly to the right of zero. Explain what this tells you about friction.
  4. Identify the largest source of error in timing and one way to reduce it.
  5. Use your results to explain why a heavier vehicle needs a stronger crash cushion to stop in the same time, and why MoDOT’s sand-barrel arrays are tested with both a small car and a pickup.

If you cannot do this lab in person: Use the two complete recorded runs in this lesson’s reading (every trial time is given), or the PhET Forces and Motion: Basics simulation (Acceleration screen, friction off), to collect four force-acceleration pairs at constant mass and complete the same analysis.

Formative check

Work through these before moving on. They are not graded — they tell you whether the standard below has landed yet.

+50 XP

A cart travels 1.00 m from rest in 1.25 s. What is its acceleration (a = 2d/t2)?

2 × 1.00 ÷ 1.252 = 2 ÷ 1.5625 = 1.28 m/s2.
Myth or Fact?

Adding washers to the hanger without taking any off the cart keeps the experiment a fair test of force alone.

It changes the total mass too. Moving washers from the cart to the hanger changes the force while keeping the mass constant.
Fill in the blank

If the graph of acceleration against force has a slope of 2.0, the mass of the system is kg.

Write your claim-evidence-reasoning paragraph supporting Newton’s second law. Include your slope, the mass it implies, your measured mass, and one source of error with its effect on the graph.

0 words
Quick self-check

How confident are you that you can collect and graph force-acceleration data and use it to support Newton’s second law?

Not yetVery confident

Practice

Work these on paper or in your notebook, then open Check your answer. Aim for all of Fluency and Application; try at least one Challenge.

Printable version: this unit’s practice workbook (PDF)

Fluency

Build speed and accuracy with the core skill.

  1. A net force of 5.4 N acts on a 1.2 kg object. What is its acceleration?
    Check your answer
    Answer: 4.50 m/s2
    a = Fnet/m.
  2. A net force of 6750.0 N acts on a 1500 kg object. What is its acceleration?
    Check your answer
    Answer: 4.50 m/s2
    a = Fnet/m.
  3. A net force of 0.6 N acts on a 1.2 kg object. What is its acceleration?
    Check your answer
    Answer: 0.50 m/s2
    a = Fnet/m.
  4. An 8 kg box is pushed with 53 N to the right against 13 N of friction. Find the net force and the acceleration.
    Check your answer
    Answer: net force 40 N to the right; a = 5.00 m/s2
    Add forces as vectors: the net force is the applied force minus friction.
  5. A net force of 54.0 N gives an object an acceleration of 4.5 m/s2. What is its mass?
    Check your answer
    Answer: 12.00 kg
    m = Fnet/a.
  6. What is the weight of 0.150 kg of washers (g = 9.8 m/s2)?
    Check your answer
    Answer: 1.47 N
    0.150 × 9.8 = 1.47 N.
  7. A cart travels 1.00 m from rest in 0.90 s. Find its acceleration.
    Check your answer
    Answer: 2.47 m/s2
    2 × 1.00 ÷ 0.902 = 2 ÷ 0.81 = 2.47.

Application

Use the skill in context. Show your reasoning.

  1. Illustrative lab data at a constant total mass of 0.600 kg: net forces 0.49, 0.98, 1.47, 1.96 N gave accelerations 0.73, 1.54, 2.31, 3.13 m/s2. The best-fit slope is 1.63. What mass does the slope imply, and how close is it to 0.600 kg?
    Check your answer
    Answer: About 0.61 kg, about 2% above 0.600 kg
    1 ÷ 1.63 = 0.613 kg; (0.613 − 0.600) ÷ 0.600 = 2.2%.
  2. Using the same total mass of 0.600 kg and ignoring friction, predict the acceleration when the hanging mass is 0.250 kg, and the time to travel 1.00 m.
    Check your answer
    Answer: 4.08 m/s2; about 0.70 s
    F = 0.250 × 9.8 = 2.45 N; a = 2.45 ÷ 0.600 = 4.08. t = √(2 × 1.00 ÷ 4.08) = 0.70 s.
  3. In a second experiment the hanging force stays at 0.98 N and the total mass is 0.40, 0.60, 0.80 and 1.00 kg. Predict the accelerations (no friction) and describe the shape of the graph of acceleration against mass.
    Check your answer
    Answer: 2.45, 1.63, 1.23, 0.98 m/s2. The graph curves downward: doubling the mass halves the acceleration (inverse relationship), not a straight line.
    a = 0.98 ÷ m for each mass.

Challenge

Stretch problems. Expect to think before you write.

  1. The best-fit line for the illustrative data is a = 1.63F − 0.065. At what pulling force would the line predict zero acceleration, and what does that force represent?
    Check your answer
    Answer: About 0.040 N; it estimates the friction force that must be overcome before the cart accelerates.
    0 = 1.63F − 0.065 gives F = 0.065 ÷ 1.63 = 0.040 N.

Review

Keep earlier skills sharp.

  1. What volume does 54.0 g of aluminum (density 2.7 g/cm3) occupy?
    Check your answer
    Answer: 20.0 cm3
    Volume = mass / density.
  2. Balance: Fe + O2 → Fe2O3
    Check your answer
    Answer: 4Fe + 3O2 → 2Fe2O3

Missouri Learning Standards — Science addressed: 9-12.PS2.A.1, SEP.3, SEP.4, CCC.2, RST.9-10.3

Instructional focus: Analyzing cart data to support Newton’s second law

Reading

The Cart Runs, Recorded: Two Complete Data Sets for Acceleration Against Net Force

Two recorded runs of the Lesson 1.2 home procedure (toy truck plus washers, total mass 0.600 kg, 1.00 m timed run, three hand-timed trials per hanging mass); constructed for this course and illustrative; best-fit lines computed by least squares from the tabulated averages (recomputed November 5, 2026) · SLS original (constructed teaching data, with computed fit statistics)

Why this reading. The lab’s alternative route says to use the recorded data in this reading. Here is every trial time, not just the averages, for two complete runs of the exact procedure in the lab, done with a toy truck on a home table. Run A is the run the mini-lecture’s table came from, now with its three trials showing. Run B is the same set-up on a rougher table. If you have no toy car that rolls well, complete the lab with these; if you do run the lab, use them to check whether your own numbers are reasonable. Both are constructed teaching data and are labeled illustrative.

Procedure that produced the record

A smooth-rolling toy truck (the “cart”) and eight 25 g washers weighed together on a kitchen scale: 0.600 kg. Two washers on the paper-clip hanger to start, the rest riding on the cart. Level table, string over the taped, rounded table edge, 1.00 m between tape lines, cart released from rest with the string taut, timed by phone stopwatch to the second line. Three trials per hanging mass; the washers were then moved two at a time from the cart to the hanger so the total mass never changed. Net force taken as hanging mass × 9.8 m/s2; acceleration from a = 2d/t2 with d = 1.00 m and the average time. n = 12 timed runs per data set.

Run A (smooth laminate kitchen table)

Hanging mass (kg)Net force (N)Time 1 (s)Time 2 (s)Time 3 (s)Average (s)a (m/s2)
0.0500.491.621.701.661.660.73
0.1000.981.121.171.131.141.54
0.1501.470.950.910.930.932.31
0.2001.960.780.820.800.803.13

Total mass of cart + all washers: 0.600 kg.

Run B (same cart and washers, unfinished plywood table)

Hanging mass (kg)Net force (N)Time 1 (s)Time 2 (s)Time 3 (s)Average (s)a (m/s2)
0.0500.491.981.901.941.940.53
0.1000.981.241.201.221.221.34
0.1501.470.990.970.980.982.08
0.2001.960.850.830.840.842.83

Total mass of cart + all washers: 0.600 kg.

The best-fit lines, so you can check yours

A least-squares line through the four (force, acceleration) points of each run:

RunSlope (m/s2 per N)Intercept (m/s2)Mass from graph, 1 ÷ slope (kg)Measured mass (kg)Percent differenceForce-axis crossing (N)
A1.63−0.0650.6130.6002.2%0.040
B1.56−0.2150.6410.6006.8%0.138

The mass, percent difference and force-axis crossing are computed from the slope rounded to two decimals, the way you will compute them from your own graph. If you plot the tables and draw a line by eye, you should land within a few hundredths of these slopes. If you are far off, check that force is on the horizontal axis and acceleration on the vertical, because swapping them gives a slope near 0.6 instead of near 1.6.

Reading the two runs against the claim

Both lines are straight. In each run, doubling the force from 0.49 N to 0.98 N roughly doubles the acceleration, and quadrupling it roughly quadruples it. That is the pattern Newton’s second law predicts for constant mass, and it is your evidence for the claim.

Both lines miss the origin, and Run B misses by more. Run A’s line crosses the force axis at about 0.04 N; Run B’s at about 0.14 N. That crossing is the pulling force that produced no acceleration at all: the force needed just to overcome friction. On the rougher table it takes more. This is exactly what the lab’s third analysis question is asking you to say: the line’s crossing to the right of zero measures friction, and a rougher surface moves it further right. Newton’s second law still holds for the net force; the intercept tells you how much of the hanging weight was not net force.

The mass from the graph is slightly high in both runs. Friction steals a little acceleration at every force, which flattens the line, lowers the slope, and raises 1 ÷ slope above the true mass. Run B, with more friction, gives the larger overestimate. Report the percent difference and give friction as its likely cause; do not call it a mistake.

Timing error. Look at the spread within each row. The three trials at 0.050 kg differ by 0.08 s in Run A; at 0.200 kg they differ by 0.04 s. Reaction time contributes roughly the same tenth of a second at every force, but at the fastest run that tenth is 12% of the whole time, and because t is squared in a = 2d/t2, a 12% timing error becomes a 25% acceleration error. That is why the fastest points scatter most, and it is the “largest source of error” the fourth analysis question is asking for. Filming the run and reading frames, or lengthening the run to 2.00 m, both shrink it.

Connecting back to the off-ramp

The slope of each line is 1 ÷ mass. A heavier system has a flatter line: the same force produces less acceleration. Turn that around for a crash cushion, which must produce a chosen deceleration in a chosen time: the heavier the vehicle, the larger the force the cushion must supply, in direct proportion. That is why the sand-barrel array in the Lesson 1.1 reading is crash-tested with both an 1,100 kg car and a 2,270 kg pickup, why MoDOT sizes its arrays by the posted speed, and why the barrels toward the back hold more sand.

Your turn

  1. Plot both runs on the same axes, draw a best-fit line for each, and read off the slope and the force-axis crossing. Compare with the table above.
  2. Write the claim-evidence-reasoning paragraph the lesson asks for, using Run A if you have no data of your own. Include the slope, the mass it implies, the 0.600 kg on the balance, the percent difference, and friction as the reason the intercept is not zero.
  3. Predict the average time for a fifth hanging mass of 0.250 kg on the Run A table, using the fitted line, and explain why moving ten washers to the hanger would break the constant-mass design.
Up NextComplete & Continue →

Leave a Reply Cancel reply

Crash Cushions at the Off-Ramp
Prev
Momentum Before and After a Collision
Next

© 2026 The VR School | Career content by Wiley | Powered by Sejal Learning Systems.

Join free · Accreditation · Privacy Policy · Terms of Service

Modal title

Main Content