THE VR SCHOOL
  • Schools & Districts
    • License the academy
    • Free program for your students
    • Request a demo
  • Catalog
    • AI & Data
    • Cybersecurity & Web
    • Programming
    • Health Science
    • All Guilds
    • All courses
  • Families
  • Accreditation
  • Log In
  • Request a demo
  • Home
  • Courses

RLP Physical Science B — Forces, Energy and Waves

Curriculum

  • 5 Sections
  • 23 Lessons
  • 10 Weeks
Expand all sectionsCollapse all sections
  • Unit 1: Motion, Forces and Collision Safety
    5
    • 1.1
      Crash Cushions at the Off-Ramp
      50 mins
    • 1.2
      Newton’s Second Law with Carts
      100 mins
    • 1.3
      Momentum Before and After a Collision
      50 mins
    • 1.4
      Impulse: Stretching the Stop
      100 mins
    • 1.5
      Performance Task — Crash Cushion Design Challenge
      200 mins
  • Unit 2: Gravity, Electricity and Magnetism
    5
    • 2.1
      Satellites Over Missouri: Gravity at a Distance
      50 mins
    • 2.2
      Electromagnets and Moving Magnets
      100 mins
    • 2.3
      Coulomb’s Law: Electric Force Versus Gravity
      50 mins
    • 2.4
      Energy in Fields: Motors and Generators
      50 mins
    • 2.5
      Performance Task — From Wind to Wire
      150 mins
  • Unit 3: Energy Conservation and Transformation
    5
    • 3.1
      Storing Sunshine by Pumping Water Uphill
      50 mins
    • 3.2
      Mixing Hot and Cold Water
      100 mins
    • 3.3
      Where Did the Energy Go? Modeling Bouncing Balls
      50 mins
    • 3.4
      Designing a Solar Oven
      100 mins
    • 3.5
      Performance Task — Energy Device Design Report
      200 mins
  • Unit 4: Waves and Information
    5
    • 4.1
      Warning Before the Shaking
      50 mins
    • 4.2
      Waves on a Spring
      100 mins
    • 4.3
      Wave or Particle? Light, Photons and Health Claims
      100 mins
    • 4.4
      Digital Signals and the Devices That Carry Them
      50 mins
    • 4.5
      Performance Task — Earthquake Early-Warning Technical Explainer
      150 mins
  • Unit 5: Missouri Physical Science Supplement
    3
    • 5.1
      The Sun and the Universe: Fusion, Redshift and the Big Bang
      50 mins
    • 5.2
      Predicting Orbits with Kepler’s Laws
      50 mins
    • 5.3
      Earth’s Engine and Energy Budget
      50 mins

Impulse: Stretching the Stop

Unit 1  ·  Modeling & Explanation Workshop  ·  Lesson 4 of 23

Impulse: Stretching the Stop

9-12.PS2.A.3RLP-PSB
Two identical eggs demonstrate a hard stop versus a foam cushion that extends stopping time.
By the end of this lesson I can…

use the impulse relationship to explain how increasing stopping time reduces force, test padding materials, and break a collision-safety design problem into smaller problems.

Instruction

From momentum to force. Combine Newton’s second law with momentum. Acceleration is change in velocity over time, so F = ma = mΔv ÷ Δt. Multiply both sides by the time:

F × Δt = mΔv = change in momentum

The product of force and time is the impulse. For a given change in momentum, which is fixed by the mass and the speed at impact, force and stopping time trade off: stretch the time and the force shrinks in proportion.

Worked example: the car. A 1,500 kg car at 25 m/s must lose 37,500 kg·m/s of momentum. Against rigid concrete in 0.10 s: F = 37,500 ÷ 0.10 = 375,000 N. Into a crash cushion over 0.50 s: 75,000 N, one-fifth. With steady deceleration the car travels half its speed times the time while stopping: 12.5 × 0.50 = 6.25 m of crushing cushion. (Illustrative figures.) Sand barrels work this way: each barrel the car hits flings its sand forward, taking some momentum, so the car slows in stages instead of all at once. MoDOT’s engineering guide says exactly this: the array “transfers the vehicle’s momentum to the increasing masses of sand in the barrels and provides a gradual deceleration.”

Worked example: the egg. A 60 g (0.060 kg) egg dropped from 1.5 m hits the floor at about 5.4 m/s (from v = √(2gh)), so its momentum is 0.060 × 5.4 ≈ 0.33 kg·m/s. If a hard floor stops it in 0.002 s, the average force is about 160 N; if foam stops it in 0.05 s, about 6.5 N. The same egg, the same drop, twenty-five times less force.

Where impulse shows up. Crumple zones in the front of a car are designed to fold, lengthening the stop for the passenger compartment. Airbags and seatbelts that stretch slightly spread a passenger’s stop over more time and more body area. Bike helmet foam crushes, stretching a head’s stop from a few milliseconds to more. A soccer player’s “soft” first touch pulls the foot back with the ball. In every case the momentum change is unchanged; the time is longer, so the force is smaller.

The padding test. You cannot measure the force on an egg directly, but you can compare padding materials with a proxy. At home, drop a 100 g mass (washers or coins sealed in a small zip-top bag, weighed to 100 g on a kitchen scale) from 50 cm onto a flat slab of modeling clay or play dough, first bare and then covered with different materials (paper towel layers, bubble wrap, foam, a folded cardboard “crumple zone”). A larger force makes a deeper dent. Measure dent depth with the end of a ruler or a toothpick marked in millimeters. Three drops per material, averaged.

Breaking down a design problem (9-12.ETS1.A.2). Engineers split a complex problem into smaller ones that can be solved and tested separately. For the design challenge: (1) How will the cushion attach to the cart? (2) Which material lengthens the stop most for its mass? (3) How will the egg be held so it does not hit the cart itself? (4) How will the design stay within the mass and size limits? Each sub-problem has its own quick test. The padding test answers sub-problem 2.

📖 Read for this lesson

The reading opens over the lesson; close it to come back to exactly where you were. The checks below draw on it.

  • The Dent-Depth Data Set, and the Impulse Numbers Behind ItFifteen drops of a 100 g mass from 50 cm onto 2 cm modeling clay, bare and under four padding samples of equal area, following the Lesson 1.4 home procedure; constructed for this course and illustrative; impulse table computed from the mini-lecture’s own figures (recomputed November 5, 2026) · about 5 min

    Fifteen drops of a 100 g mass onto modeling clay, bare and under four padding samples of equal area, with the impulse numbers worked, so the ‘stretching the stop’ argument about impulse and force can be tested against a complete data set without a tray of clay.

Vocabulary in context

  • impulse — The product of force and the time it acts, equal to the change in momentum.
  • crumple zone — A part of a vehicle designed to deform in a crash, lengthening the stopping time of the passenger compartment.
  • proxy measurement — An easier measurement used in place of the quantity of interest because the two are closely related.
  • sub-problem — A smaller, testable part of a complex design problem.

Lab: Padding Materials and Impact Force

Question. Which padding material most reduces the force of an impact, judged by the depth of the dent a dropped mass makes in clay?

Materials

  • A slab of modeling clay or play dough about 2 cm thick, smoothed flat on a tray or plate
  • A 100 g mass that can be dropped safely: washers or coins sealed in a small zip-top bag, weighed on a kitchen scale
  • Padding samples of equal area: 4 layers of paper towel, bubble wrap, craft foam, folded cardboard
  • Tape measure or meter stick, a ruler or toothpick marked in millimeters, masking tape
  • Safety glasses
Safety.
  • Wear safety glasses; a dropped bag can bounce unpredictably.
  • Drop only the 100 g mass and only from 50 cm; keep hands and faces away from the landing area.
  • Wash hands after handling the clay, and keep the small mass and clay away from young children and pets.

Procedure

  1. Tape a meter stick upright beside the clay and mark 50 cm above the clay surface.
  2. Drop the mass from rest at 50 cm onto bare clay. Measure the dent depth in millimeters, smooth the clay, and repeat for three drops.
  3. Cover the clay with the first padding sample and repeat three drops, measuring the dent under the padding each time.
  4. Repeat for each padding material, and record the mass of each padding sample.
  5. Calculate the average dent depth for each material, and the dent reduction per gram of padding.

Data

SurfacePadding mass (g)Dent 1 (mm)Dent 2 (mm)Dent 3 (mm)Average (mm)Reduction per gram
Bare clay0n/a
Paper towel
Bubble wrap
Craft foam
Folded cardboard

Analysis

  1. Claim: which material best reduces impact force? Evidence: average dent depths. Reasoning: explain with impulse how the material changes the stopping time.
  2. Which material gives the best reduction per gram? Why does that matter for a design with a mass limit?
  3. Dent depth is a proxy for force, not a force measurement. Name one way it could mislead you.
  4. Use your results to choose a material for sub-problem 2 of the design challenge and justify the choice.

If you cannot do this lab in person: Use the provided dent-depth data set in this lesson’s reading and the PhET Collision Lab (Explore 1D, sticky collisions with a heavy ball) to compare stopping outcomes, and complete the same analysis.

Formative check

Work through these before moving on. They are not graded — they tell you whether the standard below has landed yet.

+50 XP

An airbag reduces the force on a passenger mainly because it

The momentum change is fixed by speed and mass; a longer time means a smaller force.
Fill in the blank

A 0.5 kg ball’s momentum changes by 3 kg·m/s in 0.02 s, so the average force is N.

Myth or Fact?

Breaking the crash-cushion problem into separate questions about materials, attachment, egg holding and mass lets each part be tested quickly on its own.

Decomposing a complex problem into smaller, testable problems is the core of 9-12.ETS1.A.2.

List the sub-problems of the crash-cushion challenge, the quick test you would use for each, and which material your padding test suggests. Explain your choice with impulse.

0 words
Quick self-check

How confident are you that you can use impulse to explain how lengthening a stop reduces force and plan tests for a safety design?

Not yetVery confident

Practice

Work these on paper or in your notebook, then open Check your answer. Aim for all of Fluency and Application; try at least one Challenge.

Printable version: this unit’s practice workbook (PDF)

Fluency

Build speed and accuracy with the core skill.

  1. An object is dropped from rest 45 m above the ground. Ignoring air resistance (g = 9.8 m/s2), how long does it fall and how fast is it moving at impact?
    Check your answer
    Answer: 3.03 s; 29.7 m/s
    h = ½gt2; v = gt.
  2. An object is dropped from rest 1.2 m above the ground. Ignoring air resistance (g = 9.8 m/s2), how long does it fall and how fast is it moving at impact?
    Check your answer
    Answer: 0.49 s; 4.8 m/s
    h = ½gt2; v = gt.
  3. A 0.40 kg ball’s momentum changes by 4.0 kg·m/s in 0.050 s. What is the average force?
    Check your answer
    Answer: 80 N
    4.0 ÷ 0.050 = 80 N.
  4. If the stopping time of a collision triples while the momentum change stays the same, what happens to the average force?
    Check your answer
    Answer: It falls to one-third.
  5. Name three vehicle or sports safety devices that work by lengthening stopping time.
    Check your answer
    Answer: Examples: crumple zones, airbags, stretching seatbelts, helmet foam, crash cushions, gymnastics mats.
  6. A 1,500 kg car at 25 m/s stops in 0.50 s. What is the average force on the car?
    Check your answer
    Answer: 75,000 N
    37,500 kg·m/s ÷ 0.50 s.

Application

Use the skill in context. Show your reasoning.

  1. A 60 g egg falls 2.0 m. Find its speed and momentum at impact (v = √(2gh)), and the average force if it stops in 0.002 s on tile and in 0.050 s on foam.
    Check your answer
    Answer: 6.3 m/s; 0.38 kg·m/s; about 190 N on tile and 7.5 N on foam
    √(2 × 9.8 × 2.0) = 6.26 m/s; 0.060 × 6.26 = 0.376; 0.376 ÷ 0.002 = 188 N; 0.376 ÷ 0.050 = 7.5 N.
  2. A 5 kg head moving at 6 m/s stops in 0.004 s without a helmet and in 0.012 s with helmet foam (illustrative). Compare the average forces.
    Check your answer
    Answer: 7,500 N without; 2,500 N with the helmet, one-third as much
    Momentum 30 kg·m/s; 30 ÷ 0.004 = 7,500; 30 ÷ 0.012 = 2,500.
  3. In the padding test, bare clay dented 6 mm, bubble wrap 3 mm (4 g of padding) and foam 2 mm (10 g). Which gives the larger dent reduction per gram, and which would you choose with a strict mass limit?
    Check your answer
    Answer: Bubble wrap: 0.75 mm per gram against foam’s 0.40 mm per gram. With a strict mass limit, bubble wrap does more per gram, though foam gives the smallest dent overall.
    (6 − 3) ÷ 4 = 0.75; (6 − 2) ÷ 10 = 0.40.

Challenge

Stretch problems. Expect to think before you write.

  1. A ball bouncing straight back off a wall has a larger momentum change than one that stops dead against it. Explain why, and use it to explain why crash cushions are designed to absorb rather than bounce a car back.
    Check your answer
    Answer: Bouncing reverses the velocity, so the momentum change is up to 2mv instead of mv. For the same contact time the force is up to twice as large. A cushion that absorbs the car keeps the momentum change at mv and also lengthens the time, reducing force twice over.
    Δp = m(vfinal − vinitial) = m(−v − v) = −2mv for a full bounce.

Review

Keep earlier skills sharp.

  1. Find the molar mass of H2O.
    Check your answer
    Answer: 18.02 g/mol
    Add the atomic masses of every atom in the formula (H 1.008, O 15.999).
  2. Give the product of the beta decay of carbon-14.
    Check your answer
    Answer: Nitrogen-14 (and an electron)

Missouri Learning Standards — Science addressed: 9-12.PS2.A.3, 9-12.ETS1.A.2, SEP.6, CCC.4, RST.9-10.5

Instructional focus: Applying impulse to design devices that reduce collision forces

Reading

The Dent-Depth Data Set, and the Impulse Numbers Behind It

Fifteen drops of a 100 g mass from 50 cm onto 2 cm modeling clay, bare and under four padding samples of equal area, following the Lesson 1.4 home procedure; constructed for this course and illustrative; impulse table computed from the mini-lecture’s own figures (recomputed November 5, 2026) · SLS original (constructed teaching data, with computed values)

Why this reading. The lab’s alternative route names “the provided dent-depth data set.” This is it: three drops on bare clay and three under each of the four padding materials the lab lists, with the padding masses, so that the “reduction per gram” column can be filled in and sub-problem 2 of the design challenge can be answered without a tray of clay. Below the data set, the mini-lecture’s egg and car figures are worked in full so you can check each step. The data set is constructed teaching data and is labeled illustrative.

Procedure that produced the record

A slab of gray modeling clay 2.0 cm thick was smoothed flat on a tray and re-smoothed after every drop. A 100 g mass (twenty 5 g washers taped in a sealed bag, roughly the size of a golf ball) was released from rest at 50 cm, measured to the clay surface with a taped meter stick. Dent depth was read with a toothpick marked in millimeters, to the nearest 0.1 mm. Each padding sample was cut to 10 cm × 10 cm and weighed on a kitchen scale reading to 1 g. n = 15 drops.

Table 1. Dent depth under each surface

SurfacePadding mass (g)Dent 1 (mm)Dent 2 (mm)Dent 3 (mm)Average (mm)Reduction per gram (mm/g)
Bare clay09.28.89.09.0n/a
4 layers paper towel47.16.87.47.10.48
Bubble wrap, one layer64.95.35.15.10.65
Craft foam, 6 mm93.63.93.93.80.58
Folded cardboard, 4 folds142.73.12.92.90.44

Reduction per gram = (bare-clay average − padded average) ÷ padding mass. Work the bubble wrap row: (9.0 − 5.1) ÷ 6 = 0.65 mm per gram.

Reading the record

Ranking by dent depth puts folded cardboard first, then craft foam, bubble wrap, paper towel. That answers the lab’s first claim question: cardboard most reduced the force. The physics is impulse. The mass arrives with the same momentum every time (100 g at the same speed), so the momentum change is fixed; a material that crumples or compresses stretches the stopping time, and the average force, which is what dents the clay, falls in proportion.

Ranking by reduction per gram changes the order. Bubble wrap and paper towel do the most per gram; cardboard, which stops the mass best, is also the heaviest sample and drops to last. This is the trade-off the second analysis question is pointing at. The design challenge caps the cushion at 100 g. A design that fills its 100 g with cardboard gets the best stop per test but may have no mass budget left for the attachment and the egg holder (sub-problems 1 and 3). A design that uses bubble wrap gets a slightly harder stop but saves 8 g on every 10 cm × 10 cm sample.

Spread. The three bare-clay drops range over 0.4 mm; the cardboard drops over 0.4 mm as well. A difference between materials smaller than about 0.5 mm should not be trusted from three drops. Foam and cardboard (3.8 vs 2.9 mm) are separated by more than that; foam and bubble wrap (3.8 vs 5.1) are too. Paper towel and bare clay are clearly different. Say this when you rank.

How a proxy can mislead you (analysis question 3). Dent depth measures the peak pressure on the clay under the padding, not the force on the falling mass. A material that spreads the load over a wider area (a stiff sheet of cardboard) makes a shallower dent partly because the same force is spread out, not only because the force is smaller. An egg does not care how the force is spread over the clay; it cares about the force on its own shell. So a shallow dent under a stiff, wide sheet can flatter a material that would still crack an egg. This is why the design challenge tests with a real egg and a measured stopping time, not with clay.

Table 2. The mini-lecture’s impulse figures, step by step

Impulse: F × Δt = mΔv, so the average force is the momentum change divided by the stopping time. All figures illustrative, as the lesson says.

CaseMass (kg)Speed at impact (m/s)Momentum change (kg·m/s)Stopping time (s)Average force (N)
Car into concrete1,5002537,5000.10375,000
Car into crash cushion1,5002537,5000.5075,000
Egg onto hard floor0.0605.420.3250.002163
Egg onto foam0.0605.420.3250.056.5

The egg’s speed comes from a 1.5 m fall: v = √(2 × 9.8 × 1.5) = √29.4 = 5.42 m/s. Its momentum is 0.060 × 5.42 = 0.325 kg·m/s, which the lesson rounds to 0.33. Divide by 0.002 s and the force is 163 N, the lesson’s “about 160 N”; divide by 0.05 s and it is 6.5 N. The ratio of the two stopping times is 25, and so is the ratio of the forces: that is the whole impulse argument in one line. The car’s crushing distance while stopping in 0.50 s at a steady deceleration is average speed × time = 12.5 × 0.50 = 6.25 m, which matches the stop table in the Lesson 1.1 reading.

The lesson’s fill-in check works the same way: a momentum change of 3 kg·m/s in 0.02 s is 3 ÷ 0.02 = 150 N.

Your turn

  1. Complete the lab’s data table from Table 1, including the reduction-per-gram column, and write the claim-evidence-reasoning analysis with impulse as the reasoning.
  2. Your cushion may weigh 100 g. Using Table 1, propose a combination of two materials that fits the budget and justify it with both rankings.
  3. Estimate the stopping time of the 100 g mass on bare clay if the dent is 9.0 mm deep and the deceleration is steady: use average speed = half the impact speed and time = distance ÷ average speed. (Impact speed from 50 cm: √(2 × 9.8 × 0.50).) Then find the average force and compare it with the mass’s weight, 0.98 N.
Up NextComplete & Continue →

Leave a Reply Cancel reply

Momentum Before and After a Collision
Prev
Performance Task — Crash Cushion Design Challenge
Next

© 2026 The VR School | Career content by Wiley | Powered by Sejal Learning Systems.

Join free · Accreditation · Privacy Policy · Terms of Service

Modal title

Main Content