
draw and use structural models of molecules, network solids and polymers to explain how molecular-level structure gives a designed material its useful properties.
Instruction
From particles to products. Engineers choose and design materials by their particle structure. A nonstick pan, a diaper, the silicon in a rooftop solar panel and the gel that firefighters spray on houses in a wildfire all work because of how their atoms are bonded and arranged. 9-12.PS1.A.4 asks you to communicate why that molecular-level structure matters. First we need models.
Electron-dot (Lewis) models. Show each atom’s valence electrons as dots and each shared pair as a line. Hydrogen shares one pair; oxygen, with 6 valence electrons, shares two pairs and keeps two lone pairs; carbon, with 4, shares four pairs. So methane is CH4 with four C–H bonds, water is H–O–H with two lone pairs on O, and carbon dioxide is O=C=O with two double bonds. Every atom except hydrogen ends with 8 electrons around it, the stable noble-gas arrangement from Unit 1.
Shape and polarity. Electron pairs repel each other and spread out as far as possible. In CO2 the two double bonds point in opposite directions, so the molecule is linear and the two polar C=O bonds cancel: CO2 is nonpolar. In water the two lone pairs push the bonds into a bent shape (about 104.5°), so the polar bonds do not cancel and the molecule is polar. Same kinds of polar bonds, different shapes, opposite results. Shape decides polarity, and polarity decides which substances mix and how strongly molecules attract.
Networks. In diamond each carbon atom is covalently bonded to four others in a three-dimensional network, making it the hardest natural material. In graphite, carbon atoms bond in flat sheets of hexagons; the sheets are held to each other only by weak dispersion forces, so they slide (pencil lead) and electrons move along the sheets (conduction). Silicon, carbon’s neighbor in group 14, forms a diamond-like network; adding traces of other elements lets it conduct in a controlled way, the basis of solar cells.
Polymers. A polymer is a very long chain of repeating units. Polyethylene is thousands of CH2 units in a row. Long chains tangle and attract each other along their whole length, so the material is tough and flexible. Change the side groups and you change the function:
- PTFE (nonstick coating): the hydrogens of polyethylene are replaced by fluorine. The C–F bonds are very strong, and the tightly held fluorine sheath gives other molecules almost nothing to attract, so food and water do not stick.
- Sodium polyacrylate (superabsorbent polymer): the chain carries many ionic groups (–COO− with Na+). Polar water molecules are strongly attracted to these charged groups and are drawn into the lightly cross-linked network, which swells. It can hold many times its own mass of pure water. It is used in diapers and has been sold as a soil additive to hold water near plant roots.
- Aramid fiber (as in bullet-resistant vests): rigid chains line up in parallel and are linked to neighboring chains by many hydrogen bonds, giving very high strength for their weight.
How to write a structure-function explanation. Use a three-step chain: (1) name the structure at the particle level; (2) name the force or bond it produces; (3) connect that force to the bulk property and the use. Example: “PTFE’s chain is sheathed in fluorine atoms (structure); the tightly held electrons give very weak dispersion attraction to other molecules (force); so almost nothing adheres to the surface, which is why it coats cookware (function).”
📖 Read for this lesson
The reading opens over the lesson; close it to come back to exactly where you were. The checks below draw on it.
Formative check
Work through these before moving on. They are not graded — they tell you whether the standard below has landed yet.
Simulation & tools
Shape decides polarity
Open the Real Molecules screen. (1) Choose CO2 and record its shape and bond angle. (2) Choose H2O and record its shape, bond angle and the number of lone pairs. (3) Choose NH3 and CH4 and record the same. (4) For each molecule, decide whether the bond polarities cancel, and explain in one sentence why water is polar but CO2 is not. No device? Draw Lewis structures for the four molecules, sketch each shape from the lecture, and answer the same question.
Open in a new tab ↗ · PhET Interactive Simulations, University of Colorado Boulder · CC BY 4.0
Why does a superabsorbent polymer soak up water?
Carbon dioxide contains polar bonds, but the molecule is nonpolar because its linear shape makes the bond polarities cancel.
Write a three-step structure-force-function explanation for graphite being used as pencil lead, then one for diamond being used on saw blades that cut stone.
How confident are you that you can use structural models to explain how molecular structure gives a designed material its function?
Practice
Work these on paper or in your notebook, then open Check your answer. Aim for all of Fluency and Application; try at least one Challenge.
Printable version: this unit’s practice workbook (PDF)
Fluency
Build speed and accuracy with the core skill.
- How many valence electrons do H, C, N, O and Cl have?
Check your answer
Answer: 1, 4, 5, 6, 7 - How many bonds does each atom usually form: H, O, N, C?
Check your answer
Answer: H 1, O 2, N 3, C 4Each shares enough electrons to reach 8 (2 for hydrogen). - Give the shape of CO2, H2O and CH4.
Check your answer
Answer: Linear; bent; tetrahedral - Which are polar molecules: CO2, H2O, CH4, NH3?
Check your answer
Answer: H2O and NH3Their shapes leave the bond polarities uncancelled; CO2 and CH4 are symmetric. - How many lone pairs are on the oxygen in water, and on the nitrogen in ammonia?
Check your answer
Answer: Two; one
Application
Use the skill in context. Show your reasoning.
- Graphite and diamond are both pure carbon. Use their structures to explain why graphite conducts and marks paper, while diamond is an insulator and the hardest natural material.
Check your answer
Answer: Graphite: flat sheets held by weak dispersion forces slide apart (marks paper), and electrons move along the sheets (conducts). Diamond: each C bonded to four others in a 3-D network, so no weak planes and no mobile electrons.Same atoms, different arrangement, different properties. - A superabsorbent polymer absorbs far less water from salty soil water than from pure water. Offer a particle-level explanation.
Check your answer
Answer: Dissolved ions in salty water surround and partly shield the polymer’s charged groups, so they attract water less strongly and the network swells less.The absorbing power comes from attraction between charged groups and polar water; other ions compete with that attraction. - Write a structure-force-function explanation for why rainwater beads up on a car waxed with a long-chain hydrocarbon wax.
Check your answer
Answer: Structure: the wax is long nonpolar hydrocarbon chains. Force: polar water molecules attract each other (hydrogen bonds) far more than they attract the nonpolar wax. Function: water pulls itself into beads and runs off instead of spreading.
Challenge
Stretch problems. Expect to think before you write.
- Polyethylene grocery bags are soft and stretchy, but a heavily cross-linked plastic is rigid. Explain using what cross-links do to polymer chains.
Check your answer
Answer: Without cross-links, chains are held only by intermolecular forces and can slide past each other, so the plastic stretches. Cross-links are covalent bonds tying chains together; the chains can no longer slide, so the material is rigid.Cross-links replace weak between-chain forces with strong covalent bonds.
Review
Keep earlier skills sharp.
- Convert 60 mL to L.
Check your answer
Answer: 0.0600 L - Gallium is 60.11% Ga-69 (68.9256 u) and 39.89% Ga-71 (70.9247 u). Find its average atomic mass.
Check your answer
Answer: 69.72 u0.6011 × 68.9256 + 0.3989 × 70.9247 = 69.72 u.
Structure Data for Designed Materials: Geometries, Bond Energies and Measured Performance
NIST CCCBDB experimental geometries; bond energies computed from NIST Chemistry WebBook enthalpies of formation; DOE Solar Energy Technologies Office; USDA Forest Service water-enhancer QPL (Dec. 2024); Zhang et al., Polymers 2019 (CC BY 4.0); USGS MCS 2026 (Graphite); retrieved Sept. 23, 2026 · Public domain (U.S. government works) and CC BY 4.0 (Zhang et al.), with SLS commentary
Why this reading. The workshop asks you to record bond angles from a simulation (or from “the lecture” if you have no device), to explain a superabsorbent polymer, and to write structure–force–function chains for graphite and diamond. Here are the measured geometries the simulation displays, the bond energies that make “strong C–F bond” a number, a published measurement of how much a superabsorbent polymer actually absorbs in pure and in salty water, and the Department of Energy’s figures on silicon solar cells. Nothing here needs a device.
Measured molecular geometries (NIST CCCBDB)
NIST’s Computational Chemistry Comparison and Benchmark Database lists the experimentally determined shape of each molecule. These are the values behind the simulation’s pictures.
| Molecule | Bond length | Bond angle | Shape | Lone pairs on the central atom | Do the bond polarities cancel? |
|---|---|---|---|---|---|
| CO2 | C=O 1.162 Å | 180° | linear | 0 | yes: nonpolar molecule |
| H2O | O–H 0.958 Å | 104.48° | bent | 2 | no: polar molecule |
| NH3 | N–H 1.012 Å | 106.67° | trigonal pyramid | 1 | no: polar molecule |
| CH4 | C–H 1.087 Å | 109.47° | tetrahedral | 0 | yes: nonpolar molecule |
One ångström is 10−10 m. Read the angle column with the lone-pair column: four pairs around carbon spread to 109.47°; replace one bonding pair with a lone pair (ammonia) and the angle closes to 106.67°; replace two (water) and it closes to 104.48°. A lone pair takes up a little more room than a bonding pair, and the measured angles show it.
Bond energies, derived from NIST data
A bond energy is the energy to break one mole of that bond. The values below are computed from NIST Chemistry WebBook enthalpies of formation of the gaseous atoms and molecules (the method Lesson 3.3 uses), so they can be checked. Lesson 3.3 lists the commonly tabulated rounded averages, which differ by a few kJ/mol because averages are taken over many compounds.
| Bond | Computed from NIST (kJ/mol) | Where it matters here |
|---|---|---|
| C–H (in methane) | 416 | polyethylene’s surface |
| C–F (in CF4) | 492 | PTFE’s surface |
| O–H (in water) | 464 | water; the –OH groups of sugar |
| N–H (in ammonia) | 391 | the hydrogen bonds between aramid chains form at N–H groups |
| C=O (in CO2) | 804 | a double bond, for comparison |
The C–F bond is about 18% stronger than C–H, and fluorine holds the shared electrons far more tightly (electronegativity 3.98 against carbon’s 2.55). Both facts feed the PTFE chain: the fluorine sheath is chemically hard to attack, and its tightly held electrons give a neighboring molecule little to attract.
A superabsorbent polymer, measured
Zhang and colleagues (Polymers, 2019, an open-access article) made a superabsorbent polymer by grafting acrylic acid onto sawdust and measured how much liquid one gram of the dry polymer holds at equilibrium.
| Liquid | Absorbed, grams per gram of dry polymer |
|---|---|
| Deionized water | 738 |
| 0.9% sodium chloride solution (about a quarter as salty as seawater) | 90 |
The polymer holds 738 times its mass of pure water and only 90 times its mass of mildly salty water, a drop of 88%. The authors attribute the capacity to the polymer’s ionic –COO− groups (the same groups the lecture describes for sodium polyacrylate) and the drop to dissolved ions, which crowd around those charged groups and cancel much of the attraction that pulls water into the network. Two things follow for the performance task: a superabsorbent polymer is a true structure–function story (charged groups plus cross-links), and any claim about how much it holds must say in what water. Irrigation water and soil water carry dissolved salts, so field performance will sit closer to the second row than the first.
Networks: graphite, diamond, quartz, silicon
| Material | Structure | Force holding the bulk together | Property | Use |
|---|---|---|---|---|
| Diamond | every carbon bonded to four others in a three-dimensional network | covalent bonds in every direction | hardest natural material: it defines 10 on the Mohs scale | saw blades and drill bits for stone and concrete |
| Graphite | flat sheets of hexagons; each carbon bonded to three others in its sheet | covalent within a sheet; only dispersion between sheets | sheets slide; electrons move along the sheets (it conducts, as you measured in 1.2) | pencil lead, lubricants, battery electrodes (USGS: U.S. consumed about 71,000 t of natural graphite in 2025) |
| Quartz (sand) | SiO4 tetrahedra sharing every oxygen | covalent network | defines 7 on the Mohs scale; melts near 1,700 °C | glass, concrete, the source of silicon |
| Crystalline silicon | diamond-like network of silicon atoms | covalent network | a semiconductor: absorbs light and frees electrons | solar cells |
The Department of Energy’s Solar Energy Technologies Office reports that monocrystalline silicon made up 96% of global solar shipments in 2022; that laboratory silicon cells exceed 27% efficiency while industrially produced modules reach 20–22%; that modules last 25 years or more while losing less than 1% of their output per year; and that silicon is the second most abundant element in Earth’s crust after oxygen. DOE describes the working principle in one sentence: a layer of silicon absorbs light, which excites electrons, and when the electrons move they create an electric current.
Fire gels
The U.S. Forest Service qualifies “water enhancers” for wildland fire use and defines them as products that “alter the physical characteristics of water to increase effectiveness and adhesion to fuels.” Its December 2024 list is explicit about the limit: “They are not retardants. They depend on the water they contain for their effectiveness.” The listed products are mixed at 0.25% to 3% concentrate in water; most are superabsorbent-type polymers that turn water into a gel that clings to walls and roofs instead of running off. Structure (a water-swollen polymer network), force (water held to charged or polar groups, and the gel’s stickiness to surfaces), function (water stays where the heat is, and evaporating it absorbs energy). Once the water has evaporated, the Forest Service says, the product no longer works.
Your two chains
Graphite for pencil lead: name the sheets, name the weak dispersion force between them, then explain why pressing a pencil across paper leaves sheets behind. Diamond for stone saws: name the three-dimensional covalent network, name the force that must be broken to scratch it, then explain why rock (quartz, hardness 7) yields to it (hardness 10). Each chain is three sentences, and every sentence names a particle-level fact from this reading.
Sources: NIST Computational Chemistry Comparison and Benchmark Database (CCCBDB), experimental geometries (cccbdb.nist.gov); NIST Chemistry WebBook, SRD 69 (phase change and thermochemistry data by species) (webbook.nist.gov); U.S. Department of Energy, Solar Energy Technologies Office: Crystalline Silicon Photovoltaics Research (energy.gov); USDA Forest Service, Water Enhancers for Wildland Fire Management, Qualified Products List (December 5, 2024) (fs.usda.gov); Zhang, Zhang, Chen, Wang, Cao and Wang, Preparation and Characterization of Superabsorbent Polymers Based on Sawdust, Polymers 2019 (CC BY 4.0) (pmc.ncbi.nlm.nih.gov); USGS, Mineral Commodity Summaries 2026: Graphite (Natural) (pubs.usgs.gov)