
use a shell model to predict the ion an element forms and the formula of a simple compound, and calculate an element’s average atomic mass from isotope data.
Instruction
The shell model. In a simple model, electrons occupy energy levels (shells) around the nucleus. For the first 20 elements the shells fill as 2, then 8, then 8, then the rest: sodium (11 electrons) is 2, 8, 1; chlorine (17) is 2, 8, 7; calcium (20) is 2, 8, 8, 2. The electrons in the outermost shell are the valence electrons, and their number equals the last digit of the group number for groups 1-2 and 13-18. The model is simplified (real electrons occupy orbitals of different shapes), but it predicts a great deal.
Predicting ions. Atoms tend to gain or lose electrons to reach the arrangement of the nearest noble gas, with a full outer shell. Sodium loses its single valence electron to become Na+ (2, 8, like neon). Magnesium loses two, Mg2+. Aluminum loses three, Al3+. Chlorine gains one to become Cl− (2, 8, 8, like argon). Oxygen gains two, O2−.
Predicting formulas. An ionic compound is neutral overall, so positive and negative charges must cancel. Sodium chloride: +1 and −1, so NaCl. Magnesium chloride: +2 needs two −1 ions, so MgCl2. Aluminum oxide: +3 and −2; the smallest numbers that give equal total charge are two Al (+6) and three O (−6), so Al2O3. Calcium oxide: +2 and −2, so CaO. These predictions are the start of explaining reaction outcomes, which Unit 3 develops (9-12.PS1.A.2).
Back to gold and iron. Gold’s outer electron is held unusually tightly (its first ionization energy, 9.23 eV per NIST, is far above sodium’s 5.14 eV), so gold rarely gives up electrons to oxygen. Iron gives up electrons to oxygen and water much more readily, forming Fe2+ and Fe3+ ions in rust (Fe2O3 is one component, the same compound as the hematite ore mined at Pilot Knob). The model explains the iron-ore-and-gold phenomenon at the level of electrons: Missouri’s iron ore is iron that has already given up electrons to oxygen.
Isotopes and average atomic mass. The atomic mass on the periodic table is a weighted average. Chlorine in nature is 75.76% chlorine-35 (mass 34.96885 u) and 24.24% chlorine-37 (36.96590 u). Multiply each mass by its fraction and add:
0.7576 × 34.96885 + 0.2424 × 36.96590 = 35.45 u
That matches the periodic table’s 35.45. A simple average of 35 and 37 would give 36, which is wrong because the lighter isotope is three times as common. The weighted average is always closer to the more abundant isotope. The same method gives copper 63.55 u (69.15% Cu-63 at 62.9296 u, 30.85% Cu-65 at 64.9278 u) and boron 10.81 u (19.9% B-10 at 10.0129 u, 80.1% B-11 at 11.0093 u).
Scale. One atomic mass unit is about 1.66 × 10−24 g, so atoms are counted in enormous numbers. That scale problem is why chemists invented the mole, in Unit 3.
📖 Read for this lesson
The reading opens over the lesson; close it to come back to exactly where you were. The checks below draw on it.
Formative check
Work through these before moving on. They are not graded — they tell you whether the standard below has landed yet.
Simulation & tools
Mix isotopes to change the average atomic mass
Open the Mix Isotopes screen and choose chlorine. (1) Add 3 chlorine-35 atoms and 1 chlorine-37 atom; record the average atomic mass the sim shows. (2) Predict the average for 1 Cl-35 and 3 Cl-37, then test it. (3) Switch to Nature’s Mix and record the natural average. Explain in two sentences why the natural average is close to 35.5 and not 36. No device? Compute (3 × 34.97 + 1 × 36.97)/4 and (1 × 34.97 + 3 × 36.97)/4 on paper and answer the same question.
Open in a new tab ↗ · PhET Interactive Simulations, University of Colorado Boulder · CC BY 4.0
Using charges, what is the formula of the compound of aluminum and oxygen?
Chlorine’s shell arrangement is 2, 8, , so it gains electron to form Cl−.
Boron’s average atomic mass (10.81 u) shows that boron-11 is more common than boron-10.
How confident are you that you can use a shell model to predict ions and formulas and compute an average atomic mass?
Practice
Work these on paper or in your notebook, then open Check your answer. Aim for all of Fluency and Application; try at least one Challenge.
Printable version: this unit’s practice workbook (PDF)
Fluency
Build speed and accuracy with the core skill.
- Write the shell arrangement for oxygen, magnesium, phosphorus and potassium.
Check your answer
Answer: O 2, 6; Mg 2, 8, 2; P 2, 8, 5; K 2, 8, 8, 1 - Predict the ion formed by calcium, fluorine, aluminum and sulfur.
Check your answer
Answer: Ca2+, F−, Al3+, S2− - Write formulas for the ionic compounds of: K and Cl; Mg and O; Ca and Cl; Al and Cl.
Check your answer
Answer: KCl; MgO; CaCl2; AlCl3Balance the charges. - Write formulas for Na with O, and for Mg with N (N forms N3−).
Check your answer
Answer: Na2O; Mg3N2Na2O: 2(+1) + (−2) = 0. Mg3N2: 3(+2) + 2(−3) = 0.
Application
Use the skill in context. Show your reasoning.
- Copper in nature is 69.15% Cu-63 (62.9296 u) and 30.85% Cu-65 (64.9278 u). Calculate the average atomic mass.
Check your answer
Answer: 63.55 u0.6915 × 62.9296 + 0.3085 × 64.9278 = 63.55 u. - Magnesium is 78.99% Mg-24 (23.98504 u), 10.00% Mg-25 (24.98584 u) and 11.01% Mg-26 (25.98259 u). Calculate its average atomic mass.
Check your answer
Answer: 24.31 u0.7899 × 23.98504 + 0.1000 × 24.98584 + 0.1101 × 25.98259 = 24.305 u. - Use the shell model to explain why sodium and chlorine combine in a 1 : 1 ratio but magnesium and chlorine combine in a 1 : 2 ratio.
Check your answer
Answer: Na loses one electron (Na+) and Cl gains one (Cl−), so one of each balances. Mg loses two (Mg2+), so two Cl− are needed.
Challenge
Stretch problems. Expect to think before you write.
- An element X has two isotopes: X-10 and X-11, and its average atomic mass is 10.81 u. Treating the isotope masses as exactly 10 and 11, what percentage is X-11?
Check your answer
Answer: 81%Let f be the fraction of X-11: 10(1 − f) + 11f = 10.81, so 10 + f = 10.81 and f = 0.81.
Review
Keep earlier skills sharp.
- What is the mass of 5.0 cm3 of copper (density 8.96 g/cm3)?
Check your answer
Answer: 44.8 gMass = density × volume. - Which is more reactive, rubidium (4.18 eV) or sodium (5.14 eV)? One-sentence reason.
Check your answer
Answer: Rubidium; its outer electron is farther out and easier to remove. - Which particle count decides the element, which decides the isotope, and which decides the charge?
Check your answer
Answer: Protons; neutrons; electrons (relative to protons).
Isotopes, Masses and Shells: The NIST Data for the Modeling Workshop
NIST Atomic Weights and Isotopic Compositions with Relative Atomic Masses (public domain), retrieved Sept. 23, 2026; shell table and worked averages by SLS · Public domain (U.S. government data), with SLS commentary
Why this reading. The workshop asks you to draw shell diagrams, predict ions and formulas, and compute average atomic masses from isotope data. The lecture works chlorine, copper and boron. This reading gives you the NIST isotope data for eleven elements so you can compute the rest yourself and check every answer, a shell table for the first twenty elements, and the numbers for the no-device version of the simulation.
NIST isotopic compositions
Relative atomic masses in u and the fraction of each isotope in a natural sample, from NIST’s Atomic Weights and Isotopic Compositions. The last column is the standard atomic weight NIST lists; for several elements NIST gives an interval because natural samples vary slightly, and the conventional single value used on periodic tables is shown in brackets.
| Element | Isotope | Mass (u) | Fraction | Isotope | Mass (u) | Fraction | Isotope | Mass (u) | Fraction | Standard atomic weight |
|---|---|---|---|---|---|---|---|---|---|---|
| Hydrogen | H-1 | 1.00783 | 0.999885 | H-2 | 2.01410 | 0.000115 | [1.00784, 1.00811]; 1.008 | |||
| Lithium | Li-6 | 6.01512 | 0.0759 | Li-7 | 7.01600 | 0.9241 | [6.938, 6.997]; 6.94 | |||
| Boron | B-10 | 10.01294 | 0.199 | B-11 | 11.00931 | 0.801 | [10.806, 10.821]; 10.81 | |||
| Carbon | C-12 | 12.00000 | 0.9893 | C-13 | 13.00335 | 0.0107 | [12.0096, 12.0116]; 12.011 | |||
| Nitrogen | N-14 | 14.00307 | 0.99636 | N-15 | 15.00011 | 0.00364 | [14.00643, 14.00728]; 14.007 | |||
| Oxygen | O-16 | 15.99491 | 0.99757 | O-17 | 16.99913 | 0.00038 | O-18 | 17.99916 | 0.00205 | [15.99903, 15.99977]; 15.999 |
| Neon | Ne-20 | 19.99244 | 0.9048 | Ne-21 | 20.99385 | 0.0027 | Ne-22 | 21.99139 | 0.0925 | 20.1797 |
| Magnesium | Mg-24 | 23.98504 | 0.7899 | Mg-25 | 24.98584 | 0.1000 | Mg-26 | 25.98259 | 0.1101 | [24.304, 24.307]; 24.305 |
| Chlorine | Cl-35 | 34.96885 | 0.7576 | Cl-37 | 36.96590 | 0.2424 | [35.446, 35.457]; 35.45 | |||
| Copper | Cu-63 | 62.92960 | 0.6915 | Cu-65 | 64.92779 | 0.3085 | 63.546 | |||
| Iron | Fe-54 | 53.93961 | 0.05845 | Fe-56 | 55.93494 | 0.91754 | Fe-57 / Fe-58 | 56.93539 / 57.93327 | 0.02119 / 0.00282 | 55.845 |
Worked averages, and three for you
- Chlorine: 0.7576 × 34.96885 + 0.2424 × 36.96590 = 26.4924 + 8.9605 = 35.453 u. NIST’s interval is [35.446, 35.457]; 35.45 is inside it.
- Copper: 0.6915 × 62.92960 + 0.3085 × 64.92779 = 43.5158 + 20.0302 = 63.546 u. Matches NIST’s 63.546 exactly.
- Boron: 0.199 × 10.01294 + 0.801 × 11.00931 = 1.9926 + 8.8185 = 10.811 u.
- Magnesium (three isotopes): 0.7899 × 23.98504 + 0.1000 × 24.98584 + 0.1101 × 25.98259 = 18.9458 + 2.4986 + 2.8607 = 24.305 u. With three isotopes the method does not change: multiply each mass by its fraction and add.
- Your turn: neon (expect a value near 20.18), iron (near 55.845) and lithium (near 6.94; you will need this one for the performance task). Show every product and the sum.
Two checks on any answer. The average must lie between the lightest and heaviest isotope, and it must lie closer to the more abundant one. Copper’s 63.546 is closer to 63 than to 65 because Cu-63 is 69% of the atoms.
The simulation without a device
The sim task asks for two mixtures of chlorine. Using 34.97 u and 36.97 u: three Cl-35 and one Cl-37 give (3 × 34.97 + 36.97) ÷ 4 = 141.88 ÷ 4 = 35.47 u; one Cl-35 and three Cl-37 give (34.97 + 3 × 36.97) ÷ 4 = 145.88 ÷ 4 = 36.47 u. Nature’s mix, from the table above, is 35.45: close to the first mixture because nature is about three Cl-35 for every Cl-37, not one for one.
Shells for the first twenty elements
The simple model fills 2, then 8, then 8, then 2. The predicted ion is the one that reaches the nearest full shell; elements marked “shares” usually bond by sharing instead.
| Z | Element | Shells | Group | Valence electrons | Predicted ion |
|---|---|---|---|---|---|
| 1 | H | 1 | 1 | 1 | H+ (or shares) |
| 2 | He | 2 | 18 | 2 (full) | none |
| 3 | Li | 2, 1 | 1 | 1 | Li+ |
| 4 | Be | 2, 2 | 2 | 2 | Be2+ |
| 5 | B | 2, 3 | 13 | 3 | shares |
| 6 | C | 2, 4 | 14 | 4 | shares |
| 7 | N | 2, 5 | 15 | 5 | N3− (or shares) |
| 8 | O | 2, 6 | 16 | 6 | O2− |
| 9 | F | 2, 7 | 17 | 7 | F− |
| 10 | Ne | 2, 8 | 18 | 8 (full) | none |
| 11 | Na | 2, 8, 1 | 1 | 1 | Na+ |
| 12 | Mg | 2, 8, 2 | 2 | 2 | Mg2+ |
| 13 | Al | 2, 8, 3 | 13 | 3 | Al3+ |
| 14 | Si | 2, 8, 4 | 14 | 4 | shares |
| 15 | P | 2, 8, 5 | 15 | 5 | P3− (or shares) |
| 16 | S | 2, 8, 6 | 16 | 6 | S2− |
| 17 | Cl | 2, 8, 7 | 17 | 7 | Cl− |
| 18 | Ar | 2, 8, 8 | 18 | 8 (full) | none |
| 19 | K | 2, 8, 8, 1 | 1 | 1 | K+ |
| 20 | Ca | 2, 8, 8, 2 | 2 | 2 | Ca2+ |
Formulas from charges: a set to complete
Charges must cancel. Worked: Al3+ with O2− needs +6 and −6, so Al2O3; Ca2+ with Cl− gives CaCl2; Li+ with O2− gives Li2O. Now write the formulas for K with S, Mg with F, Na with N, Al with Cl, Ca with O, and Li with Cl, and check that the total positive and negative charge in each is equal. Two of these six are compounds you will meet again: lithium’s, in the Unit 1 task, and the calcium–oxygen pair, in the mole calculations of Unit 3.
Sources: NIST, Atomic Weights and Isotopic Compositions with Relative Atomic Masses (Physical Measurement Laboratory) (physics.nist.gov)