
Up, Up and Pop: A Launch Brief for a Community Weather Balloon
How can a model of tiny, fast-moving particles explain why a gas expands, shrinks and cools, and how can that model help a volunteer weather station plan how much helium to use, how high its balloon will climb, and how to keep its payload battery working in the cold?
The mystery: A sealed bag of chips bought at the bottom of a mountain road is puffed up like a pillow by the time the car reaches the top. A party balloon left in a freezer overnight comes out wrinkled and small, then slowly fills out again as it warms on the counter. Nothing was added to the bag or the balloon.
describe a gas as a system of tiny particles in constant random motion, explain pressure as the result of particle collisions, and ask testable questions about why a sealed bag or balloon changes size.
Phase 1: Spark
Do Now. A sealed bag of chips is bought at a gas station in a valley. An hour later, at a mountain pass, the bag is tight and puffed up. Nothing got in. Draw what you think the air inside the bag looks like at the bottom and at the top, as if you had a microscope strong enough to see it.
Why does the sealed chip bag puff up on the drive up the mountain?
The phenomenon. Two everyday puzzles open this unit. A sealed chip bag swells on a mountain drive and flattens again on the way down. A balloon left in a freezer shrinks and wrinkles, then re-inflates on the kitchen counter. In both cases no gas is added or removed. Something about the gas itself changes. To explain it we need a model of what a gas is made of and what its particles are doing.
The kinetic molecular theory (KMT). Chemists model a gas with five ideas. (1) A gas is made of a huge number of tiny particles (atoms or molecules). (2) The particles are far apart compared with their size; most of a gas is empty space. (3) The particles move constantly, in straight lines, in random directions, until they hit something. (4) Collisions with each other and with the walls are elastic: the total kinetic energy of the particles is not lost in collisions. (5) The average kinetic energy of the particles depends only on the temperature. Kinetic means “of motion,” so this is literally the theory of moving molecules.
How small and how fast? One liter of air at room conditions holds about 2.5 × 1022 molecules. At 15 °C an average nitrogen molecule moves at about 500 m/s, faster than a passenger jet, and a helium atom at about 1,300 m/s. Each molecule hits another molecule billions of times every second, so its path is a zig-zag even though each step is straight.
Pressure is collisions. Every time a particle hits a wall it pushes on it for an instant. Billions of hits each second, spread over the wall’s area, add up to a steady push per area: pressure, P = F / A. The SI unit is the pascal (1 Pa = 1 N/m2); weather and lab work use kilopascals. Air at sea level presses on everything with about 101.3 kPa, also written as 1 atmosphere (atm) or 760 mm Hg. More hits per second, or harder hits, mean more pressure.
Worked example 1: the chip bag. Amara modeled the bag as a system: the gas inside, the plastic wall, and the outside air as the surroundings. At the valley, outside air pressure is about 101 kPa; at a 3,000 m pass it is about 70 kPa. The inside particles keep hitting the wall just as before, but the outside air now hits back about 30% less. The wall is pushed outward until the inside particles are spread out enough that their hits per area match the outside. Same particles, more space: the bag puffs.
Worked example 2: the freezer balloon. Tomas modeled the balloon before and after the freezer. Cold air molecules move more slowly on average. Slower particles hit the inside of the rubber less often and less hard, so the rubber and the outside air squeeze the balloon smaller until the hits balance again. On the counter, energy flows from the warm room into the gas, the particles speed up, and the balloon re-inflates. The energy of the gas is stored as the motion of its particles.
Systems and surroundings. Every model in this unit starts by drawing a boundary: what is inside the system (the gas in the bag), and what is outside (the air, the freezer, the car). Energy and pushes cross the boundary. A good model shows both scales at once: the bag you can see, and the particles you cannot.
Asking good questions. “Why is air weird?” cannot be tested. “Does a balloon’s size change by the same amount for every 10 degrees of cooling?” can. Today you start the unit’s question board and sort questions into ones a lab can answer, ones published data can answer, and ones that need a model first.
Reading. OpenStax Chemistry 2e, chapter 9 (gases), sections 9.1 and 9.5, CC BY 4.0.
Work with a partner. For each question, picture the particles.
In your Gas Notebook, draw a two-scale model of the chip bag at the valley and at the pass.
| Part of the model | Valley (101 kPa) | Mountain pass (70 kPa) |
|---|---|---|
| What you see (bag shape) | ||
| Particles inside (spacing, arrows) | ||
| Particles outside (spacing, arrows) | ||
| System boundary labeled |
Under your drawing, explain in 3–4 sentences how your particle-scale picture explains the bag's shape. Use the words collision, pressure and system.
We have a phenomenon and a first particle model. Next class, you meet the client who needs this model to fly a balloon to the edge of space.
Exit ticket: when the freezer balloon warms on the counter, where does the energy that speeds up its particles come from? Name the system and the surroundings.
Materials: a sealed snack bag (or a photo pair of a flat and a puffed bag), a balloon chilled in a freezer or cooler before class, chart paper for the question board, devices for the PhET sim or the paper box task.
Listen for: “cold air is heavier so it squishes the balloon”; “particles expand when hot” (the particles do not grow; the space between them does); pressure described as weight.
Support / stretch: give a model checklist (boundary, particles inside, particles outside, arrows for motion). Stretch: estimate how many molecules are in a 2 L chip bag from 2.5 × 1022 per liter (about 5 × 1022).