draw slope triangles on a line and use similar triangles to explain why the slope is the same between any two points.
Phase 2: Investigate
Do Now. On grid paper, draw the line through (0, 0), (4, 3) and (8, 6). Draw a small right triangle under the line from (0, 0) to (4, 3), and a bigger one from (0, 0) to (8, 6).
How do the two triangles compare?
The reading opens over the lesson; close it to come back to exactly where you were.
Slope triangles. Pick any two points on a line. Draw a right triangle with a horizontal leg (the run) and a vertical leg (the rise), and the line as its long side. This is a slope triangle. Slope = rise ÷ run.
Worked example 1: two triangles, one slope. Zoe uses the line through (0, 0), (4, 3), (8, 6) and (12, 9). Step 1: small triangle from (0, 0) to (4, 3): run 4, rise 3, slope 3/4. Step 2: big triangle from (4, 3) to (12, 9): run 8, rise 6, slope 6/8 = 3/4. Step 3: each side of the big triangle is 2 times the matching side of the small one. Step 4: the slopes match.
Why the triangles are similar. Both triangles have a right angle. Both horizontal legs are parallel, and the same straight line crosses them, so the angles where the line meets the horizontal legs are equal. Two pairs of equal angles make the triangles similar, so their sides are proportional and rise ÷ run is the same.
Worked example 2: a line that does not start at 0. Andre uses the line through (0, 2), (3, 4) and (9, 8). Step 1: from (0, 2) to (3, 4): rise 2, run 3, slope 2/3. Step 2: from (3, 4) to (9, 8): rise 4, run 6, slope 4/6 = 2/3. Step 3: the triangles are similar again, with a scale factor of 2. Similar triangles work on any straight line that is not vertical, not only ones through the origin.
Back to ramps. A ramp with two runs at 1:12 has two slope triangles. A run that rises 30 inches over 360 inches and a run that rises 15 inches over 180 inches are similar: 30/360 = 15/180 = 1/12. A grade break would change the slope, so the ramp would no longer be one straight line.
Use it. Because the slope is the same everywhere, you may pick the two easiest grid points on a line to find its slope.
Draw every slope triangle on grid paper with a ruler.
Triangle hunt on one line.
Graph the line through (0, 1) and (2, 4). Draw three slope triangles of different sizes, label each rise and run, and show that each slope is 1.5.
A ramp has two runs, each at 1:12. The first rises 24 inches. The second rises 18 inches. How long is the second run?
Draw a ramp with a grade break (two different slopes). Explain why it is not one straight line.
Similar triangles prove that a straight line has one slope. Next we study lines that do not start at the origin, using taxi fares.
Exit ticket: on the line through (1, 1) and (5, 3), find the slope with two different slope triangles.
Pacing: Do Now 6 min, reading 6, mini lesson 10, guided practice 13, exit ticket 5.
Accuracy: 30-inch rise per run, no limit on number of runs, level landings, uniform running slope, grade breaks, curved ramps and the advice to avoid very long ramp systems are from the Access Board guide read 2026-11-20 (same page as 2.07). The angle argument uses grade 8 parallel-line angle facts informally.
Likely misconceptions: thinking bigger triangles mean a bigger slope; drawing the triangle above the line with legs swapped; counting the hypotenuse as the run.
Supports: tracing paper to lay one triangle on another. Stretch: find a third point on the line through (0, 2) and (3, 4) with x = 12 ((12, 10)).
Answer guide: the triangles each have a right angle and equal angles where the line crosses parallel horizontal legs, so they are similar and rise ÷ run matches. Line through (0, 1) and (2, 4): triangles such as (0, 1)-(2, 4), (2, 4)-(4, 7), (0, 1)-(4, 7) give 3/2, 3/2, 6/4. Exit ticket: 2/4 = 1/2, and from (1, 1) to (3, 2) gives 1/2.
U.S. Access Board, Guide to the ADA Accessibility Standards, Chapter 4: Ramps and Curb Ramps · U.S. government work, public domain
We return to the U.S. Access Board’s guide to ramps. This time we look at long ramps.
The guide limits how high each run of a ramp can climb: no more than 30 inches. A run is one straight, sloped section. The guide says there is no limit on how many runs a ramp may have. Each run needs a level landing, a flat place, at its top and bottom, and landings where a ramp turns must be at least 60 inches by 60 inches.
The guide also says the running slope should be uniform, meaning the same, along each run, although materials such as concrete may vary slightly. A change in slope partway along a run, called a grade break, can make wheelchair travel harder. Most curved ramps do not meet the rules unless the curve is very gradual, because otherwise the surface tilts in two directions at once.
Long ramps take effort. The guide points out that landings give people places to rest, but they do not reduce the total work of climbing many runs. For that reason, it says very long ramp systems should be avoided where possible.
Source: U.S. Access Board, Guide to the ADA Accessibility Standards, Chapter 4: Ramps and Curb Ramps (access-board.gov)