graph a proportional relationship on a coordinate plane and find the unit rate at the point where x = 1.
Phase 2: Investigate
Do Now. A sample car goes 30 miles on each gallon of gas. How far does it go on 2 gallons? On 5 gallons? Plot the pairs (gallons, miles) on your grid.
What shape will your points make?
The reading opens over the lesson; close it to come back to exactly where you were.
From table to graph. A coordinate plane has an x-axis (across) and a y-axis (up). Each pair (x, y) in a table is one point. For a car, x is gallons of gas and y is miles driven.
Worked example 1: graphing 30 MPG. Hana graphs a sample car that gets 30 miles per gallon. Step 1: table: (0, 0), (1, 30), (2, 60), (5, 150). Step 2: she counts the y-axis by 30s and the x-axis by 1s and plots the points. Step 3: the points line up, so she draws a straight line through them. Step 4: the line passes through the origin (0, 0), because 0 gallons means 0 miles.
Where is the unit rate? Look at the point where x = 1. For this car it is (1, 30): one gallon, thirty miles. On every proportional graph, the point (1, r) shows the unit rate r.
Worked example 2: a year of driving. Omar’s sample family car gets 25 MPG. The label assumes 15,000 miles a year. Step 1: miles = 25 × gallons. Step 2: he needs the gallons that give 15,000 miles: 15,000 ÷ 25 = 600. Step 3: check: 25 × 600 = 15,000. Step 4: the point (600, 15,000) is on the car’s line. A 30 MPG car would need only 15,000 ÷ 30 = 500 gallons.
What every proportional graph shares. It is a straight line, it passes through the origin, and the point (1, r) shows the unit rate. If a graph is curved or misses the origin, it is not proportional.
Reading between points. On the 30 MPG line, 3.5 gallons gives 30 × 3.5 = 105 miles. The line lets us read values we never put in the table.
Use grid paper, a ruler and the 30 MPG graph from the mini lesson.
Graph two sample cars on the same grid.
Car A gets 25 MPG and Car B gets 35 MPG. Make a table for 0, 1, 2 and 4 gallons for each car, graph both lines on one grid, and label the unit-rate point on each.
Using the label's 15,000 miles a year, how many gallons does a 30 MPG car use in a year?
Look at your two lines. Write one sentence about how the steeper line connects to its MPG.
Proportional relationships make straight lines through the origin. Next we measure how steep a line is and connect it to the unit rate.
Exit ticket: a graph is a straight line through (0, 0) and (3, 75). What is the unit rate, and which point shows it?
Pacing: Do Now 6 min, reading 7, mini lesson 10, graphing in pairs 12, exit ticket 5.
Accuracy: the 55/45 combined weighting, the gallons-per-100-miles rate, the MPG illusion figures (about 33 and about 5 gallons over 1,000 miles) and the 15,000 miles per year assumption are from the fueleconomy.gov label page read 2026-11-20. The 25, 28, 30, 35 and 40 MPG cars are sample data.
Likely misconceptions: reversing the pair (30, 1); unequal axis spacing that bends the line; thinking any straight line is proportional.
Supports: pre-scaled grids (x by 1, y by 10). Stretch: a 50 MPG car’s fuel use for 15,000 miles (300 gallons).
Answer guide: the origin: 0 gallons means 0 miles for every car. Car A: (1, 25), (2, 50), (4, 100); Car B: (1, 35), (2, 70), (4, 140). The 35 MPG line is steeper because each gallon adds more miles. Exit ticket: 75 ÷ 3 = 25, shown by (1, 25).
U.S. Department of Energy and U.S. EPA, fueleconomy.gov: Learn More About the Fuel Economy Label for Gasoline Vehicles · U.S. government work, public domain
New cars in the United States come with a fuel economy label. The Department of Energy and the Environmental Protection Agency explain the label on fueleconomy.gov.
The biggest number is the car’s MPG, or miles per gallon. It tells how many miles the car can go on one gallon of fuel, so it is a unit rate. The label gives a city MPG, a highway MPG and a combined MPG. The combined value counts city driving as 55 percent and highway driving as 45 percent.
The label also shows the opposite rate: how many gallons the car uses to go 100 miles. This is called the fuel consumption rate. The page explains that comparing MPG numbers can fool people, which it calls the “MPG illusion.” Going from 10 to 15 MPG saves about 33 gallons over 1,000 miles, but going from 30 to 35 MPG saves only about 5 gallons.
The label estimates a car’s yearly fuel cost by assuming the car is driven 15,000 miles a year and using a projected fuel price. It also compares the car with the average new vehicle over five years.
Source: U.S. Department of Energy and U.S. EPA, fueleconomy.gov: Learn More About the Fuel Economy Label for Gasoline Vehicles (fueleconomy.gov)