use rational approximations to compare and order irrational and rational numbers, and place them at their approximate locations on a number line.
Phase 3: Make Sense
Do Now. Which is greater, π or √10? Make a claim and give a reason before you compute anything.
Which is greater?
The reading opens over the lesson; close it to come back to exactly where you were.
Same idea, new numbers. To compare numbers, write each as a decimal to the same place, then compare place by place. For an irrational number, use a rational approximation that is precise enough to tell the numbers apart.
Worked example 1: five numbers near 3. Kayla orders π, √10, 3.1 (the 1 repeats), 10/3 and 3.15. Step 1: π ≈ 3.142. Step 2: 3.16² = 9.9856 and 3.17² = 10.0489, so √10 ≈ 3.16. Step 3: 3.1 (the 1 repeats) = 3.111… and 10/3 = 3.3 (the 3 repeats) = 3.333…. Step 4: compare: 3.111 < 3.142 < 3.150 < 3.16 < 3.333. So 3.1 (the 1 repeats) < π < 3.15 < √10 < 10/3.
Worked example 2: when tenths are not enough. Javier orders 2.8, √8, 17/6 and 2.8 (the 8 repeats). Step 1: in tenths they almost all look like 2.8, so zoom in. Step 2: 2.82² = 7.9524 and 2.83² = 8.0089, so √8 is between 2.82 and 2.83. Step 3: 17/6 = 2.83 (the 3 repeats) = 2.8333… and 2.8 (the 8 repeats) = 2.888…. Step 4: 2.8 < √8 (less than 2.83) < 17/6 (2.833) < 2.8 (the 8 repeats). The order is 2.8, √8, 17/6, 2.8 (the 8 repeats).
Negatives flip. √5 ≈ 2.24, so −√5 ≈ −2.24. On a number line −2.24 is to the left of −2.2, so −√5 < −2.2.
Placing on a number line. Pick a window, such as 3 to 3.5. Mark the tenths. Put each number at its approximate spot and label it with its exact name (π, √10), not only the decimal. This is the plan for our number line placard.
Write each number as a decimal to the thousandths before you compare.
Make a number line placard draft.
Draw a number line from 0 to 4. Place √2, √3, √5, √10, π, 22/7 and 2.<span style="text-decoration: overline">6</span> (the 6 repeats). Label each with its exact name.
Which is the correct order from least to greatest?
Use the reading: JPL compared 3.14 with a 15-digit value of pi. Why do longer decimals let you tell two very close numbers apart?
We can line up any numbers. Next we run a mistake clinic to fix the most common errors before we write placards.
Exit ticket: order √8, 2.8 and 2.<span style="text-decoration: overline">8</span> (the 8 repeats) and show the approximations you used.
Pacing: Do Now 4 min, reading 6, mini lesson 12, guided practice 13, exit ticket 5.
Accuracy: the fan question (3.14 or 360+ digits), 15 decimals for interplanetary navigation, the 40-billion-mile circle, a little more than 125 billion miles, about half an inch of error, and the molecule-sized error for Earth are from the JPL article (updated 2026-03-04). Checks: 3.16² = 9.9856, 3.17² = 10.0489; 2.82² = 7.9524, 2.83² = 8.0089; 17/6 = 2.83 (the 3 repeats); √5 ≈ 2.236; √11 ≈ 3.317; √3 ≈ 1.732; 22/7 ≈ 3.143; 2.6 (the 6 repeats) = 8/3 ≈ 2.667. Repeating blocks are one digit, within the limit.
Likely misconceptions: comparing √10 and π by the number under the root (“10 is bigger than 3.14”); thinking −2.2 < −√5 because 2.2 < 2.24; stopping at tenths when the tenths match.
Supports: number lines pre-marked in tenths and a zoomed strip in hundredths. Stretch: place √99 and 9.95 (√99 ≈ 9.95; 9.95² = 99.0025, so √99 is just under 9.95).
Answer guide: number line: √2 ≈ 1.41, √3 ≈ 1.73, √5 ≈ 2.24, 2.6 (the 6 repeats) ≈ 2.67, π ≈ 3.14, 22/7 ≈ 3.14 (just right of π), √10 ≈ 3.16. Longer decimals: more places show the first place where the numbers differ. Exit ticket: 2.8 < √8 (about 2.83) < 2.8 (the 8 repeats) (2.889).
NASA/JPL Edu, How Many Decimals of Pi Do We Really Need? · NASA/JPL-Caltech. JPL is run for NASA by Caltech, so this is not strictly a U.S. government work; JPL allows educational use with credit. Retold in our own words
This NASA article began with a question from a fan on social media. The fan wanted to know whether JPL scientists use just 3.14 for pi, or many more digits, maybe 360 or more.
Engineer Marc Rayman answered: neither. For the most accurate work, steering spacecraft between planets, JPL uses 3.141592653589793, which is 15 decimal places. That is far more than 3.14, but far fewer than 360.
He tested the 15-digit value on a giant circle with a radius of 20 billion miles, farther out than Voyager 1, the most distant spacecraft, has gone so far. That circle is 40 billion miles across. Its circumference came out a little more than 125 billion miles, and it was wrong by only about half an inch. For a circle the size of Earth, the error would be about the size of a molecule.
The article explains that the important question is not the exact value of pi. It is how big the error becomes when you stop using more digits. For real science, 15 decimal places are already more than enough.
Source: NASA/JPL Edu, How Many Decimals of Pi Do We Really Need? (jpl.nasa.gov)