
draw and measure ellipses of different eccentricities, and use Kepler’s third law to predict the period or size of an orbit in the solar system.
Instruction
A pattern in the sky. Johannes Kepler spent years fitting Tycho Brahe’s careful observations of Mars. In the early 1600s he found three rules that describe every orbit in the solar system. Isaac Newton later showed that all three follow from gravity.
First law: orbits are ellipses with the Sun at one focus. An ellipse is the set of points whose distances to two fixed points (the foci) add up to a constant. That is why you can draw one with two pins and a loop of string. The semi-major axis a is half the longest diameter. The distance from the center to a focus is c, and the eccentricity is e = c/a. A circle has e = 0; a very stretched ellipse approaches 1. Earth’s orbit has e ≈ 0.017, so it is nearly a circle; the change in distance is not the cause of the seasons.
Second law: equal areas in equal times. A line from the Sun to a planet sweeps out equal areas in equal times, so a planet moves fastest near the Sun (perihelion) and slowest far from it (aphelion). Gravity is stronger close in, so the planet speeds up as it falls inward.
Third law: T2 = a3. For anything orbiting the Sun, if the period T is in years and a is in astronomical units (1 AU = Earth’s average distance from the Sun), then T2 = a3, so T = a3/2.
Worked example 1. Mars has a = 1.524 AU. T = 1.5241.5 ≈ 1.88 years, which matches the observed 687 days. Jupiter: a = 5.203 AU gives T ≈ 11.87 years (observed 11.86).
Worked example 2: Halley’s Comet. Halley returns about every 76 years. Then a = T2/3 = 762/3 ≈ 17.9 AU. Its closest approach is about 0.586 AU, so its farthest point is 2a − 0.586 ≈ 35.3 AU, beyond Neptune. Its eccentricity is (a − 0.586)/a ≈ 0.97: a long, thin ellipse.
Newton’s version. For orbits around a body of mass M, T = 2π√(a3/GM). For Earth, GM = 3.986 × 1014 m3/s2. The International Space Station orbits about 420 km up, so a = 6,371 + 420 = 6,791 km, and T ≈ 92.8 minutes. A satellite 35,786 km up takes about 1,436 minutes, one sidereal day, so it hovers over one spot: a geostationary orbit. This is the same mathematics engineers use to place GPS and weather satellites.
In the lab you will draw ellipses, measure a and c, and see how moving the pins changes the shape. Measurement error matters: a 2 mm error in c changes e more when the pins are close together, so you will estimate your uncertainty.
📖 Read for this lesson
The reading opens over the lesson; close it to come back to exactly where you were. The checks below draw on it.
Lab: Drawing Orbits with Pins and String
Question. How does the distance between the foci change the shape of an ellipse, and does Kepler’s third law fit the real planets?
Materials
- Corrugated cardboard or a foam board (about 30 cm × 40 cm)
- Two push pins
- A 25 cm loop of string
- Sheets of plain paper and a sharp pencil
- Metric ruler (mm)
- Calculator or spreadsheet
- Push pins are sharp: push them in with the flat of your thumb, keep them in the board when not in use, and count them back in at the end.
- Keep the pencil tip pointed away from your face and hands while tracing, and work at a table, not on your lap.
Procedure
- Tape paper to the board. Push two pins 2 cm apart near the center and drop the string loop around both.
- Pull the loop taut with the pencil and trace a full ellipse, keeping the string tight.
- Measure the longest diameter (2a) and the distance between the pins (2c) in millimeters. Record a, c and e = c/a.
- Repeat with the pins 4, 6, 8 and 0 cm apart (one pin only for 0 cm). Keep the same loop.
- Mark the ‘Sun’ at one pin on your 6 cm ellipse. Measure the closest (perihelion) and farthest (aphelion) distances and check that they add to 2a.
- Copy the planetary data table into your notebook or a spreadsheet. Compute T² and a³ for each planet and compare.
Data
| Pin separation 2c (mm) | 2a (mm) | a (mm) | c (mm) | e = c/a |
|---|---|---|---|---|
| 0 | ||||
| 20 | ||||
| 40 | ||||
| 60 | ||||
| 80 |
Planetary data (NASA planetary fact sheets): Mercury a = 0.387 AU, T = 0.241 yr; Venus 0.723 AU, 0.615 yr; Earth 1.000 AU, 1.000 yr; Mars 1.524 AU, 1.881 yr; Jupiter 5.203 AU, 11.86 yr; Saturn 9.537 AU, 29.45 yr.
Analysis
- Claim: how does pin separation affect eccentricity? Support it with your measured values and explain why using the definition e = c/a.
- Plot T² against a³ for the six planets. What pattern do you see, and what is the slope? What does that tell you about Kepler’s third law?
- Use T = a^1.5 to predict the period of the dwarf planet Ceres (a = 2.77 AU). Then look up the observed value and compute your percent difference.
- Sources of error: estimate the uncertainty in your measurement of c and explain why it matters most when the pins are close together.
If you cannot do this lab in person: Use the PhET Kepler’s Laws simulation (below) to make ellipses by changing the orbit’s eccentricity and read a, c and e from the sim’s measuring tools; the planetary data analysis is the same.
Formative check
Work through these before moving on. They are not graded — they tell you whether the standard below has landed yet.
Simulation & tools
Testing Kepler’s second and third laws
Open the Second Law screen. Set the eccentricity to about 0.6 and turn on the area sweeps (divide the orbit into 6 sections). Record the area of the section nearest the star and the one farthest away. Are they equal? Which section does the planet cross fastest?
Open the Third Law screen. Record the semi-major axis and period for four different orbits, compute T2/a3 for each, and write one sentence on whether the ratio stays constant.
No sim? Use the NASA planet table in the lab: compute T2/a3 for each planet on paper.
Open in a new tab ↗ · PhET Interactive Simulations, University of Colorado Boulder · CC BY 4.0
An asteroid orbits the Sun with a semi-major axis of 4 AU. What is its period?
Earth has summer when it is closest to the Sun.
A satellite company wants a satellite with a period of exactly 12 hours. Use T = 2π√(a³/GM) with GM = 3.986 × 10¹⁴ m³/s² to find its orbital radius and its height above Earth’s surface (Earth’s radius 6,371 km). Show each step.
How confident are you that you can describe orbits with Kepler’s laws and use T² = a³ to predict an orbit?
Practice
Work these on paper or in your notebook, then open Check your answer. Aim for all of Fluency and Application; try at least one Challenge.
Printable version: this unit’s practice workbook (PDF)
Fluency
Build speed and accuracy with the core skill.
- An asteroid has a semi-major axis of 9 AU. What is its orbital period?
Check your answer
Answer: 27 yearsT = a3/2 = 91.5 = 27. - A comet has a period of 8 years. What is its semi-major axis?
Check your answer
Answer: 4 AUa = T2/3 = 82/3 = 4. - An ellipse has semi-major axis 12 cm and center-to-focus distance 3 cm. What is its eccentricity?
Check your answer
Answer: 0.25e = c / a = 3 / 12. - An object orbits at 0.5 AU. What is its period in days?
Check your answer
Answer: about 129 days (0.354 yr)T = 0.51.5 years.
Application
Use the skill in context. Show your reasoning.
- Ceres orbits at a = 2.77 AU. Predict its period.
Check your answer
Answer: about 4.61 yearsT = 2.771.5. - Neptune’s semi-major axis is 30.07 AU. How many Earth years is one Neptune year, and how many orbits has it completed since its discovery in 1846 (to 2026)?
Check your answer
Answer: about 164.9 years; about 1.09 orbitsT = 30.071.5; 180 / T. - A geostationary satellite orbits at a = 42,164 km from Earth’s center. Use T = 2π√(a3/GM) with GM = 3.986 × 1014 m3/s2 to find its period in hours.
Check your answer
Answer: about 23.93 hoursa = 4.2164 × 107 m; T = 86164 s.
Challenge
Stretch problems. Expect to think before you write.
- A GPS-like satellite must have a period of exactly 12 hours. Find its orbital radius and its height above Earth’s surface (radius 6,371 km).
Check your answer
Answer: radius about 26,610 km; height about 20,239 kma = (GM T2 / 4π2)1/3 with T = 43,200 s.
Review
Keep earlier skills sharp.
- Convert 300 km to m.
Check your answer
Answer: 300,000.00 m - What volume does 40.0 g of water (density 1.0 g/cm3) occupy?
Check your answer
Answer: 40.0 cm3Volume = mass / density.
A Recorded Pins-and-String Run, and JPL’s Orbits for Ceres and Halley
SLS original illustrative lab record (procedure of Lesson 1.2, one group, 5 pin separations, 3 traces each); NASA JPL Small-Body Database Lookup for 1P/Halley and 1 Ceres, retrieved September 23, 2026 · SLS original (illustrative lab record), with public-domain NASA JPL orbital data
Why this reading. The lab’s data table is blank until you draw the ellipses, and its only alternative is a simulation. Here is a completed run of the same procedure, so that a student with no pins, no string and no internet can do every analysis question, and here are the published orbits of Ceres and Halley’s Comet, so that “look up the observed value” means looking here. The lab record is constructed teaching data, labeled illustrative; the orbital elements are NASA’s.
The geometry the record must obey
At either end of the long axis, the pencil, both pins and the string lie on one line, and the loop is made of the two string segments plus the gap between the pins: (a + c) + (a − c) + 2c = loop length. With a 250 mm loop, 2a = 250 − 2c. So the long axis shrinks as the pins spread, while c grows, and e = c/a climbs quickly. Any record that violates this was measured or copied wrongly; check yours against it before you compute anything.
Table 1. Illustrative pins-and-string record
Procedure as in the lab: a 25 cm loop of string, two push pins, pencil traces measured with a millimeter ruler. Each separation was traced three times and the long diameter measured on each trace. n = 5 separations × 3 traces = 15 ellipses. Values in millimeters. Constructed data, not measurements of a particular group.
| Pin separation 2c (mm) | 2a, trace 1 | 2a, trace 2 | 2a, trace 3 | Mean 2a (mm) | a (mm) | c (mm) | e = c/a | Predicted 2a = 250 − 2c |
|---|---|---|---|---|---|---|---|---|
| 0 (one pin) | 249 | 248 | 249 | 248.7 | 124.3 | 0 | 0.00 | 250 |
| 20 | 229 | 228 | 229 | 228.7 | 114.3 | 10 | 0.087 | 230 |
| 40 | 208 | 209 | 207 | 208.0 | 104.0 | 20 | 0.19 | 210 |
| 60 | 189 | 188 | 189 | 188.7 | 94.3 | 30 | 0.32 | 190 |
| 80 | 168 | 169 | 167 | 168.0 | 84.0 | 40 | 0.48 | 170 |
On the 60 mm ellipse, the closest distance from the marked “Sun” pin to the curve measured 64 mm and the farthest 125 mm; 64 + 125 = 189 = 2a, as the definition of an ellipse requires (perihelion = a − c ≈ 64.3, aphelion = a + c ≈ 124.3). Every measured 2a sits 1 to 2 mm under the prediction: the pencil pulls the string slightly inside the ideal curve and the pins have thickness. That is a systematic error, and it is small.
Uncertainty in e
Suppose c is uncertain by 1 mm (half a millimeter at each pin). At 2c = 20 mm, e = 10/114.3 = 0.087, but with c = 11 it is 0.096, a change of 0.009, about 10% of e. At 2c = 80 mm, c = 41 gives 41/84 = 0.488 against 0.476, a change of 0.012, about 2.5% of e. The same ruler error matters four times more, in relative terms, when the pins are close together, because e itself is small there. This is the point the mini-lecture makes; now you have the numbers.
Table 2. Orbits from NASA JPL
JPL Small-Body Database, retrieved September 23, 2026. a semi-major axis, e eccentricity, q perihelion distance, Q aphelion distance, T period. Halley’s elements are for the 1968 epoch orbit as listed.
| Body | a (AU) | e | q (AU) | Q (AU) | T (days) | T (years) | a3/2 (years) |
|---|---|---|---|---|---|---|---|
| 1 Ceres | 2.77 | 0.0797 | 2.55 | 2.99 | 1,680 | 4.60 | 4.61 |
| 1P/Halley | 17.9 | 0.968 | 0.575 | 35.3 | 27,700 | 75.8 | 75.7 |
Ceres, the lab’s prediction. T = 2.771.5 = 2.77 × √2.77 = 2.77 × 1.664 = 4.61 years. Observed: 1,680 days / 365.25 = 4.60 years. Percent difference (4.61 − 4.60)/4.60 = 0.2%. Kepler’s third law, written down in 1619 for six planets, predicts the period of a body discovered in 1801 to two decimal places.
Halley, the mini-lecture’s example. The lecture works from a 76-year period and a 0.586 AU perihelion and gets a ≈ 17.9 AU, aphelion 35.3 AU and e ≈ 0.97. JPL’s listed orbit has q = 0.575 AU and e = 0.968; the perihelion distance differs in the third figure because the planets nudge Halley’s orbit, so it differs from one return to the next, and “the” perihelion depends on which apparition you quote. Both agree on 17.9 AU and 35.3 AU, and 17.91.5 = 75.7 years against JPL’s 75.8. When you cite an orbit, say whose and for which epoch.
Satellites: the same law with a constant
For a body orbiting Earth, Kepler’s law needs Earth’s mass: T = 2π√(a3/GM), with GM = 3.986 × 1014 m3/s2 (NASA Earth Fact Sheet: 0.39860 × 106 km3/s2). Solved for the radius: a = (GM T2 / 4π2)1/3. Worked for one sidereal day, T = 86,164 s: GM T2 = 3.986 × 1014 × 7.424 × 109 = 2.959 × 1024; divide by 4π2 = 39.48 to get 7.496 × 1022; the cube root is 4.216 × 107 m = 42,160 km, and subtracting Earth’s 6,371 km mean radius leaves about 35,790 km, the geostationary altitude the mini-lecture quotes. The open question asks for a 12-hour orbit; run the same five steps with T = 43,200 s and expect an altitude between the space station’s and the geostationary belt.
Your turn
- Plot e against 2c from Table 1. Is it a straight line? Explain from e = c/a and 2a = 250 − 2c why it cannot be exactly straight.
- Using Table 1’s 60 mm ellipse, mark the Sun at one focus and describe where along the curve a planet would move fastest, citing the second law.
- Ceres has e = 0.0797. Compute its perihelion as a(1 − e) and aphelion as a(1 + e) and compare with JPL’s 2.55 and 2.99 AU.
Sources: NASA JPL Small-Body Database Lookup (ssd.jpl.nasa.gov); NASA JPL SBDB API record for 1P/Halley (ssd-api.jpl.nasa.gov); NASA JPL SBDB API record for 1 Ceres (ssd-api.jpl.nasa.gov); NASA Earth Fact Sheet (NSSDC), GM (nssdc.gsfc.nasa.gov)