
identify the limiting reagent from mole ratios, calculate theoretical yield and percent yield, and argue from batch data whether adding more of a reactant would increase the product.
Instruction
Reactions run out of something. A bicycle needs 2 wheels and 1 frame. With 10 wheels and 3 frames you can build 3 bicycles, not 5, because frames run out first; four wheels are left over. In a chemical reaction the limiting reagent is the reactant that is used up first and so sets how much product can form. The other reactant is in excess. Because coefficients are mole ratios, you decide which is limiting by comparing moles, never grams.
The ratio test. For N2 + 3H2 → 2NH3, divide the moles you have of each reactant by its coefficient; the smaller quotient belongs to the limiting reagent. Suppose a reactor receives 100.0 g of N2 and 25.0 g of H2. Moles of N2 = 100.0 ÷ 28.014 = 3.570 mol, and of H2 = 25.0 ÷ 2.016 = 12.40 mol. Ratio test: N2 3.570 ÷ 1 = 3.570; H2 12.40 ÷ 3 = 4.134. The smaller is N2, so nitrogen is limiting even though there is far more hydrogen by moles and far less hydrogen by mass. That is why you must not compare grams.
Theoretical yield and leftovers. The limiting reagent sets the theoretical yield: the most product the equation allows. Here 2 mol NH3 form per 1 mol N2, so 3.570 × 2 = 7.139 mol, and 7.139 mol × 17.031 g/mol = 121.6 g of NH3. The hydrogen used is 3 × 3.570 = 10.709 mol, leaving 12.40 − 10.709 = 1.692 mol, or 3.41 g, of H2 unreacted. Conservation check: 125.0 g in = 121.6 g NH3 + 3.4 g leftover H2.
Percent yield. The actual yield is what you really collect. Percent yield = actual ÷ theoretical × 100. If the reactor delivered 87.0 g, then 87.0 ÷ 121.6 × 100 = 71.6%. Percent yields below 100% come from side reactions, reactions that do not go to completion, and product lost in transfers. A yield above 100% means the product still holds water or another impurity, or the measurement is wrong; matter is not created. Industrial chemists often send unreacted gas back through the reactor to raise the overall yield.
Arguing from data. A good scientific argument states a claim, gives evidence (numbers) and reasoning (the chemical principle), and answers a rebuttal. Suppose a plant manager says, “We should add more ammonia to every batch, because more ammonia always means more fertilizer.” The ratio test lets you test that claim on each batch in the lesson’s reading: if ammonia is in excess, adding more changes nothing.
The Missouri connection. USDA’s Economic Research Service reports that in 2018, 98% of Missouri corn acres received nitrogen fertilizer at an average of 169 pounds of nitrogen per fertilized acre. As ammonia, that is 76.7 kg of nitrogen, or 93.2 kg of NH3, per acre (76.7 × 17.031 ÷ 14.007). The USGS says about 88% of U.S. ammonia production goes to fertilizer, and that urea, ammonium nitrate, nitric acid, ammonium phosphates and ammonium sulfate are its major derivatives. The reading gives three batch logs from an ammonium nitrate unit, NH3 + HNO3 → NH4NO3, so you can test the manager’s claim yourself.
📖 Read for this lesson
The reading opens over the lesson; close it to come back to exactly where you were. The checks below draw on it.
Formative check
Work through these before moving on. They are not graded — they tell you whether the standard below has landed yet.
Simulation & tools
Reactants, products and leftovers
Open the Sandwiches screen, then Molecules. (1) For “Make Water” (2H2 + O2 → 2H2O) choose 5 H2 and 3 O2, and record what is left over and which reactant is limiting. (2) Repeat with 4 H2 and 4 O2. (3) Write the ratio test (amount ÷ coefficient) for each and check it matches the simulation. No device? Do both counts on paper with 5 H2 + 3 O2 and 4 H2 + 4 O2.
Open in a new tab ↗ · PhET Interactive Simulations, University of Colorado Boulder · CC BY 4.0
Use the batch table in this lesson’s reading. In which batch would adding more ammonia (NH3) increase the amount of ammonium nitrate made?
For 100.0 g N2 and 25.0 g H2, the theoretical yield of NH3 is g (to 4 significant figures).
A measured percent yield of 108% shows that the reaction made extra matter.
Write a claim-evidence-reasoning argument that responds to the plant manager’s claim that adding more ammonia always raises output. Use the batch table in this lesson’s reading: identify the limiting reagent in each batch with the ratio test, give the percent yield of at least one batch, and end with a rebuttal to the objection that “Batch B proves the manager is right.”
How confident are you that you can find the limiting reagent, calculate theoretical and percent yield, and support an argument with the numbers?
Practice
Work these on paper or in your notebook, then open Check your answer. Aim for all of Fluency and Application; try at least one Challenge.
Printable version: this unit’s practice workbook (PDF)
Fluency
Build speed and accuracy with the core skill.
- For 2H2 + O2 → 2H2O with 4.0 mol H2 and 3.0 mol O2, find the limiting reagent, the moles of water and the moles of excess left.
Check your answer
Answer: H2 limits (4.0 ÷ 2 = 2.0 vs 3.0 ÷ 1 = 3.0); 4.0 mol H2O; 1.0 mol O2 leftRatio test: the smaller quotient limits. 4.0 mol H2 makes 4.0 mol H2O and uses 2.0 mol O2. - A reaction has a theoretical yield of 8.0 g and an actual yield of 7.2 g. What is the percent yield?
Check your answer
Answer: 90.0%7.2 ÷ 8.0 × 100. - A run has a percent yield of 75.0% and an actual yield of 45.0 g. What was the theoretical yield?
Check your answer
Answer: 60.0 g45.0 ÷ 0.750. - For N2 + 3H2 → 2NH3 with 2.00 mol N2 and 5.00 mol H2, find the limiting reagent, moles of NH3 and moles of N2 left.
Check your answer
Answer: H2 limits (5.00 ÷ 3 = 1.667 vs 2.00); 3.33 mol NH3; 0.333 mol N2 left5.00 mol H2 × 2/3 = 3.333 mol NH3; N2 used = 5.00 ÷ 3 = 1.667 mol. - A student reports a percent yield of 112%. Give two reasonable explanations that do not break conservation of mass.
Check your answer
Answer: The product was still wet or contained an impurity or leftover reactant, or the reactant mass or product mass was measured incorrectly.Matter is not created, so the measured mass must include something that is not pure product. - A batch has a theoretical yield of 4.00 g and an actual yield of 3.40 g. What is the percent yield?
Check your answer
Answer: 85.0%3.40 ÷ 4.00 × 100.
Application
Use the skill in context. Show your reasoning.
- A reactor receives 56.0 g N2 and 10.0 g H2. Find the limiting reagent and the theoretical yield of NH3.
Check your answer
Answer: H2 limits (4.96 mol H2; N2 would need 1.65 mol but has 2.00 mol); theoretical yield 56.3 g NH3N2 1.999 mol; H2 4.960 mol; H2 ÷ 3 = 1.653 is smaller; NH3 = 4.960 × 2/3 × 17.031. - The reactor above delivers 48.0 g of NH3. What is the percent yield, and what mass of N2 is left over (to 3 significant figures)?
Check your answer
Answer: 85.2%; 9.68 g N2 left48.0 ÷ 56.32 × 100; N2 left = (1.999 − 1.653) mol × 28.014. - Use the batch table in this lesson’s reading. For Batch C, name the limiting reagent, the theoretical yield, the percent yield and the mass of excess reagent.
Check your answer
Answer: HNO3 limits; theoretical 4,827 kg NH4NO3; percent yield 94.1%; excess 173 kg NH370.46 kmol NH3 vs 60.31 kmol HNO3; product 60.31 kmol × 80.043; actual 4,540 ÷ theoretical. - Using Batch B in the reading: how many kilograms of nitric acid are left unreacted, and what does that tell you about adding more nitric acid?
Check your answer
Answer: 300 kg HNO3 is left; adding more acid would not raise output because ammonia limits(63.48 − 58.72) kmol × 63.012 g/mol.
Challenge
Stretch problems. Expect to think before you write.
- A two-step process has a 92.0% yield for roasting and a 95.0% yield for reduction. What is the overall percent yield, and how much lead would 1,000 kg of pure PbS give (theoretical lead is 866.0 kg)?
Check your answer
Answer: 87.4% overall; 756.9 kg of lead0.920 × 0.950 = 0.8740; × 866.0 kg. - A plant needs 1,000 kg of NH4NO3 at a 96.0% yield, with nitric acid in excess. What mass of NH3 must it feed?
Check your answer
Answer: 221.6 kg NH3Theoretical product = 1,000 ÷ 0.960 = 1041.7 kg; × 17.031 ÷ 80.043 (1 : 1 mole ratio).
Review
Keep earlier skills sharp.
- Convert 250.0 g of NaHCO3 to moles.
Check your answer
Answer: 2.976 mol250.0 ÷ 84.006. - Balance NH3 + O2 → NO + H2O.
Check your answer
Answer: 4NH3 + 5O2 → 4NO + 6H2ON: 4NH3 and 4NO; H: 12 gives 6H2O; O: 4 + 6 = 10, so 5O2.
Three Ammonium Nitrate Batches and Missouri Corn Nitrogen: Limiting Reagent and Yield Data
USGS Mineral Commodity Summaries 2026, Nitrogen; USDA ERS Fertilizer Use and Price Tables 9 and 10; NIST standard atomic weights; all retrieved 2026-11-15; batch logs are SLS illustrative · Public domain (USGS, USDA, NIST data), with SLS original illustrative batch logs and worked examples
Why this reading. The lesson asks you to argue from numbers whether adding more of one reactant raises output. This reading supplies the numbers: three illustrative batch logs from an ammonium nitrate unit, a worked ammonia example to check your method, and the real Missouri nitrogen-use figures that show why the chemistry matters.
Where the numbers come from
- USGS (Nitrogen, 2026): about 88% of U.S. ammonia production went to fertilizer in 2025. Urea, ammonium nitrate, nitric acid, ammonium phosphates and ammonium sulfate were, in descending order of quantity, the major derivatives of ammonia produced in the United States. Ammonia was made at 38 plants in 19 states, and producing plants ran at about 80% of rated capacity.
- USDA ERS (Tables 9 and 10): in 2018, 98% of Missouri corn acres received nitrogen fertilizer, at an average of 169 pounds of nitrogen per fertilized acre.
- Molar masses from NIST atomic weights: NH3 17.031, HNO3 63.012, NH4NO3 80.043, N2 28.014, H2 2.016 g/mol.
Illustrative batch logs: NH3 + HNO3 → NH4NO3
These three batch logs are SLS original and illustrative; they are not records from any plant. Masses are in kilograms of pure reagent (water in the acid is not counted). Moles are in kilomoles (kmol, 1,000 mol). The ratio is 1 : 1 : 1, so the smaller number of kmol is the limiting reagent.
| Batch | NH3 fed (kg) | HNO3 fed (kg) | NH3 (kmol) | HNO3 (kmol) | Limiting reagent | Theoretical NH4NO3 (kg) | Actual NH4NO3 (kg) | Percent yield | Excess left |
|---|---|---|---|---|---|---|---|---|---|
| A | 1,000 | 3,500 | 58.72 | 55.54 | HNO3 | 4,446 | 4,310 | 96.9% | 54 kg NH3 |
| B | 1,000 | 4,000 | 58.72 | 63.48 | NH3 | 4,700 | 4,512 | 96.0% | 300 kg HNO3 |
| C | 1,200 | 3,800 | 70.46 | 60.31 | HNO3 | 4,827 | 4,540 | 94.1% | 173 kg NH3 |
Check for Batch A: 4,500 kg in; 4,446 kg product at full conversion plus 54 kg unreacted NH3 = 4,500 kg.
The plant manager’s claim
“Adding more ammonia to every batch always raises output.” Test it with the table: where is ammonia limiting, and where is it already in excess? Batch B’s result may look like proof for the manager, so decide what Batches A and C show that Batch B cannot.
A worked ammonia example to check your method
100.0 g N2 (3.570 mol) and 25.0 g H2 (12.40 mol), with N2 + 3H2 → 2NH3. Ratio test: N2 3.570 ÷ 1; H2 4.134 (that is 12.40 ÷ 3). N2 is limiting. Theoretical NH3: 121.6 g; leftover H2: 3.41 g; percent yield for 87.0 g actual: 71.6%.
Why this matters in Missouri
One fertilized acre at 169 lb N is 76.7 kg of nitrogen, which is 93.2 kg of NH3 (82.2% nitrogen by mass) or 482.9 lb of NH4NO3 (35.0% nitrogen by mass). A yield that is a few percent low is a lot of nitrogen when multiplied by millions of acres.
Sources: U.S. Geological Survey, Mineral Commodity Summaries 2026, Nitrogen (Fixed)–Ammonia (retrieved 2026-11-15) (pubs.usgs.gov); USDA Economic Research Service, Fertilizer Use and Price, Tables 9 and 10 (corn nitrogen use by state, through 2018) (retrieved 2026-11-15) (ers.usda.gov); NIST Physical Measurement Laboratory, Atomic Weights and Isotopic Compositions (standard atomic weights; conventional values used where NIST gives an interval) (retrieved 2026-11-15) (physics.nist.gov)