
develop a model, with energy diagrams and bond-energy arithmetic, showing that the energy released or absorbed by a reaction depends on the energy to break bonds and the energy released when new bonds form.
Instruction
The phenomenon. Missouri has six fuel ethanol plants with a combined production capacity of 338 million gallons per year, according to the U.S. Energy Information Administration’s January 1, 2025 survey (this lesson’s reading). The U.S. Department of Energy’s Alternative Fuels Data Center lists the energy content (lower heating value) of pure ethanol (E100) at 76,330 Btu per gallon and of gasoline at 112,114 to 116,090 Btu per gallon, so a gallon of ethanol carries about two-thirds of the energy of a gallon of gasoline (66 to 68 percent). Why? The answer is in the bonds.
Breaking absorbs, forming releases. Chemical energy is stored in the arrangement of electrons in bonds. To break a bond, you must supply energy; when a new bond forms, energy is released. In a reaction, the reactant bonds are broken and the product bonds are formed. If the bonds formed are stronger in total than the bonds broken, the system releases energy: the reaction is exothermic and the energy change ΔH is negative. If the bonds broken are stronger in total, the reaction is endothermic and ΔH is positive. The energy diagram has reactants at one level, products at another, and a hump in between for the activation energy. ΔH = (energy to break bonds) − (energy released forming bonds).
Average bond energies (kJ/mol). H–H 432, O=O 495, O–H 467, C–H 413, C–C 347, C–O 358 and C=O in carbon dioxide 799. These are average values, taken over many compounds, so they give estimates (see this lesson’s reading for the source). Example: forming gaseous water, H2 + ½O2 → H2O. Break 432 + ½(495) = 679.5 kJ. Form two O–H bonds: 2 × 467 = 934 kJ. ΔH = 679.5 − 934 = −254.5 kJ per mole of water. The measured value from NIST is −241.826 kJ/mol, within about 5 percent. Splitting two moles of water, the reverse, is endothermic: +509 kJ, the energy electrolysis or sunlight must supply.
Burning fuels. For ethanol vapor, C2H5OH + 3O2 → 2CO2 + 3H2O, count the bonds in one ethanol molecule: 5 C–H, 1 C–C, 1 C–O and 1 O–H. Break: 5(413) + 347 + 358 + 467 + 3(495) = 4,722 kJ. Form: 4 C=O at 799 (3,196 kJ) plus 6 O–H at 467 (2,802 kJ) = 5,998 kJ. ΔH = 4,722 − 5,998 = −1,276 kJ per mole. NIST enthalpies of formation give −1,278.5 kJ/mol, a difference of 0.2 percent. For octane vapor (a gasoline component, C8H18, 18 C–H and 7 C–C bonds), the same method gives −5,139.5 kJ/mol against −5,116.1 from NIST (0.5 percent). A Python loop does this arithmetic for any fuel; your practice set asks you to write one.
Per gram, not per mole. A mole of octane is much heavier than a mole of ethanol (114.232 versus 46.069 g/mol). From NIST’s measured and formation data, burning liquid ethanol releases 1,367.6 ÷ 46.069 = 29.7 kJ/g and liquid octane 5,470.6 ÷ 114.232 = 47.9 kJ/g; ethanol delivers 62 percent as much energy per gram. The reason is in the model: ethanol already has a C–O and an O–H bond to its oxygen, so it is already partly “burned”. It has less to gain from forming new O–H and C=O bonds. The carbon dioxide released per megajoule is almost the same, 64.4 g for each (88.02 g of CO2 per 1.3676 MJ for ethanol, 352.1 g per 5.4706 MJ for octane), but that counts only the tailpipe; where the carbon came from is a separate argument that needs life-cycle data.
Limits of the model. Bond energies are averages, so they can miss by several percent, and some molecules miss by more. The model also ignores the activation energy and the phase of the substances: burning liquid ethanol gives a different ΔH than burning its vapor, because evaporating costs energy. Check every model against a measurement and say how close it came.
📖 Read for this lesson
The reading opens over the lesson; close it to come back to exactly where you were. The checks below draw on it.
Formative check
Work through these before moving on. They are not graded — they tell you whether the standard below has landed yet.
Breaking the bonds in the reactants takes 4,722 kJ, and forming the bonds in the products releases 5,998 kJ. The reaction is
Splitting 2 mol of water into H2 and O2 by the bond-energy model takes kJ (positive, so endothermic).
Bond energies from a table are exact values for every molecule.
Use the data tables in this lesson’s reading. Per gram, burning liquid ethanol (1,367.6 kJ/mol; 46.069 g/mol) releases about
Choose one reaction from the reading (propane, methane or octane). Draw its energy diagram with approximate levels, show the break and form sums, compare your ΔH with the NIST-based value and give the percent difference. Then explain in one sentence why bond-energy averages cannot give an exact answer.
How confident are you that you can model the energy of a reaction from bond energies and explain why the energy released depends on the bonds broken and formed?
Practice
Work these on paper or in your notebook, then open Check your answer. Aim for all of Fluency and Application; try at least one Challenge.
Printable version: this unit’s practice workbook (PDF)
Fluency
Build speed and accuracy with the core skill.
- Does breaking a bond absorb or release energy? Does forming a bond? What sign does ΔH have for an exothermic reaction?
Check your answer
Answer: Breaking absorbs energy; forming releases it; ΔH is negative for an exothermic reaction. - Use bond energies (H–H 432, Cl–Cl 239, H–Cl 427 kJ/mol) to find ΔH for H2 + Cl2 → 2HCl.
Check your answer
Answer: −183 kJ (exothermic)Break 432 + 239 = 671. Form 2 × 427 = 854. 671 − 854 = −183 kJ. - Use bond energies (O–H 467, H–H 432, O=O 495) to find ΔH for 2H2O → 2H2 + O2. Is it endothermic or exothermic?
Check your answer
Answer: +509 kJ; endothermicBreak 4 × 467 = 1,868. Form 2 × 432 + 495 = 1,359. 1,868 − 1,359 = +509 kJ. - Ethanol burns with ΔH = −1,367.6 kJ/mol. The molar mass is 46.069 g/mol. How much energy per gram?
Check your answer
Answer: 29.7 kJ/g1,367.6 ÷ 46.069 = 29.69 kJ/g. - On an energy diagram, which is higher in an exothermic reaction, the reactants or the products? What does the hump between them represent?
Check your answer
Answer: The reactants are higher. The hump is the activation energy.
Application
Use the skill in context. Show your reasoning.
- Use bond energies to estimate ΔH for CH4 + 2O2 → CO2 + 2H2O(g) (C–H 413, O=O 495, C=O 799, O–H 467). The NIST-based value is −802.6 kJ/mol. Find the percent difference.
Check your answer
Answer: −824 kJ/mol; the estimate is about 2.7% greater in magnitude than the NIST-based value.Break 4(413) + 2(495) = 2,642. Form 2(799) + 4(467) = 3,466. ΔH = −824. (824 − 802.6) ÷ 802.6 = 2.7%. - Estimate ΔH for propane, C3H8 + 5O2 → 3CO2 + 4H2O(g), with 8 C–H and 2 C–C bonds (C–C 347). The NIST-based value is −2,044.0 kJ/mol.
Check your answer
Answer: −2,057 kJ/mol, about 0.6% different from the NIST-based valueBreak 8(413) + 2(347) + 5(495) = 3,304 + 694 + 2,475 = 6,473. Form 6(799) + 8(467) = 4,794 + 3,736 = 8,530. ΔH = −2,057. (2,057 − 2,044.0) ÷ 2,044.0 = 0.6%. - Estimate ΔH for ethanol vapor burning to CO2 and water vapor (5 C–H, 1 C–C, 1 C–O, 1 O–H in ethanol). Compare with the NIST-based −1,278.5 kJ/mol.
Check your answer
Answer: −1,276 kJ/mol, within 0.2% of the NIST-based valueBreak 2,065 + 347 + 358 + 467 + 1,485 = 4,722. Form 4(799) + 6(467) = 5,998. ΔH = −1,276. - How much energy is released burning 1.00 kg of ethanol (29.69 kJ/g)? Give the answer in megajoules.
Check your answer
Answer: 29.7 MJ1,000 g × 29.69 kJ/g = 29,690 kJ = 29.7 MJ.
Challenge
Stretch problems. Expect to think before you write.
- Liquid octane’s enthalpy of combustion from NIST formation data is 8(−393.51) + 9(−285.83) − (−250.0) = −5,470.6 kJ/mol (octane 114.232 g/mol). Find kJ per gram and the ratio of ethanol’s energy per gram to octane’s.
Check your answer
Answer: 47.9 kJ/g for octane; ethanol’s 29.7 kJ/g is 0.62 (62%) of that5,470.55 ÷ 114.232 = 47.89 kJ/g; 29.69 ÷ 47.89 = 0.62. - A U.S. Department of Energy table lists 76,330 Btu/gal for ethanol and 112,114 to 116,090 Btu/gal for gasoline. Calculate the range of the ratio, and explain what it means for a driver filling a tank.
Check your answer
Answer: 0.658 to 0.681 (66 to 68%). A gallon of ethanol carries about two-thirds of the energy of a gallon of gasoline, so a car on pure ethanol would travel roughly two-thirds as far per gallon, other things equal.76,330 ÷ 112,114 = 0.681; 76,330 ÷ 116,090 = 0.658. - Burning ethanol gives 64.4 g of CO2 per MJ, and burning octane gives 64.4 g per MJ. Show the arithmetic for ethanol, and say what this does and does not tell you about the climate effect of the fuels.
Check your answer
Answer: Ethanol: 2 × 44.009 = 88.02 g of CO2 per 1.3676 MJ = 64.4 g/MJ. It says the tailpipe CO2 per unit of energy is about the same; it does not say where the carbon came from, so a full comparison needs life-cycle data.88.018 ÷ 1.3676 = 64.36 g/MJ; octane 8 × 44.009 = 352.07 g per 5.4706 MJ = 64.36 g/MJ.
Review
Keep earlier skills sharp.
- How many moles are in 10.0 g of ethanol (46.069 g/mol)?
Check your answer
Answer: 0.217 mol (0.2171 mol)10.0 ÷ 46.069 = 0.2171 mol. - How many moles of gas are in 0.500 L at 2.00 atm and 293.15 K? (R = 0.082057 L·atm/(mol·K))
Check your answer
Answer: 0.0416 moln = (2.00 × 0.500) ÷ (0.082057 × 293.15) = 0.04157 mol.
Bond Energies, NIST Enthalpies and Missouri Ethanol: Data for Lesson 4.4
Average bond energies from the Chemistry LibreTexts page Bond Energies (Table T3, authors Kim Song and Donald Le, CC BY-NC-SA 4.0, cited by link); NIST Chemistry WebBook enthalpies of formation and combustion (gas and liquid phase); U.S. Department of Energy Alternative Fuels Data Center, Fuel Properties Comparison; U.S. Energy Information Administration, U.S. Fuel Ethanol Plant Production Capacity (released September 26, 2025); NIST atomic weights; all retrieved 2026-11-15. Worked calculations are SLS · SLS original (prose and worked calculations); NIST, DOE and EIA data are U.S. government data in the public domain; bond energies are published reference values cited by link
Why this reading. The lesson’s models are only as good as the numbers they use. This reading gives the bond-energy table behind the estimates (and says plainly that they are averages), the NIST enthalpies of formation used as the check, a table comparing the model with the measurements for five reactions, and the fuel data for ethanol and gasoline, including Missouri’s ethanol plants.
Average bond energies (kJ/mol)
These are average bond energies: each is an average over many different molecules, so a calculation that uses them is an estimate. Another table may list slightly different values (for example 436 for H–H or 464 for O–H). This course uses one consistent table. C=O is the value for carbon dioxide; a typical C=O in other molecules is lower (745).
| Bond | kJ/mol | Bond | kJ/mol |
|---|---|---|---|
| H–H | 432 | C–H | 413 |
| O=O | 495 | C–C | 347 |
| O–H | 467 | C–O | 358 |
| H–Cl | 427 | C=O (in CO2) | 799 |
| Cl–Cl | 239 | N≡N | 941 |
NIST enthalpies of formation used as the check (kJ/mol)
| Substance | State | ΔfH° (kJ/mol) | Note |
|---|---|---|---|
| CO2 | gas | −393.51 | NIST (CODATA review) |
| H2O | gas | −241.826 | NIST (CODATA review) |
| H2O | liquid | −285.830 | NIST (CODATA review) |
| CH4 | gas | −74.6 | NIST adopted value |
| C3H8 | gas | −103.8 | NIST, one of two listed values |
| C2H5OH | gas | −234 | NIST average of 9 values, ±2 |
| C8H18 | gas | −208.4 | NIST, Prosen and Rossini 1945 |
| C8H18 | liquid | −250.0 | NIST, Prosen and Rossini 1945 |
Measured enthalpy of combustion of liquid ethanol (NIST, Chao and Rossini 1965): −1,367.6 kJ/mol, with liquid water as a product.
Bond-energy estimates compared with NIST-based values (gas phase, water as vapor)
| Reaction | Bonds broken (kJ) | Bonds formed (kJ) | Estimated ΔH (kJ/mol) | NIST-based ΔH (kJ/mol) | Difference |
|---|---|---|---|---|---|
| Water formation, H2 + ½O2 → H2O(g) | 679.5 | 934 | -254.5 | -241.8 | 5.2% |
| Methane, CH4 + 2O2 → CO2 + 2H2O(g) | 2,642.0 | 3,466 | -824.0 | -802.6 | 2.7% |
| Propane, C3H8 + 5O2 → 3CO2 + 4H2O(g) | 6,473.0 | 8,530 | -2,057.0 | -2,044.0 | 0.6% |
| Ethanol, C2H5OH + 3O2 → 2CO2 + 3H2O(g) | 4,722.0 | 5,998 | -1,276.0 | -1,278.5 | 0.2% |
| Octane, C8H18 + 12.5O2 → 8CO2 + 9H2O(g) | 16,050.5 | 21,190 | -5,139.5 | -5,116.1 | 0.5% |
Energy per gram
Molar masses: ethanol 46.069 g/mol, octane 114.232 g/mol (NIST weights). Ethanol: 1,367.6 ÷ 46.069 = 29.7 kJ/g. Octane (liquid, from the formation values with liquid water): 8(−393.51) + 9(−285.83) − (−250.0) = -5,470.6 kJ/mol; 47.9 kJ/g. Ratio: 0.62.
Carbon dioxide per megajoule: ethanol 2 × 44.009 = 88.018 g per 1.3676 MJ = 64.4 g/MJ; octane 8 × 44.009 = 352.07 g per 5.4706 MJ = 64.4 g/MJ. This counts the carbon dioxide leaving the tailpipe only.
Fuel energy per gallon (U.S. Department of Energy)
Energy content, lower heating value: gasoline (E10 blend listed with it) 112,114–116,090 Btu/gal; ethanol (E100) 76,330 Btu/gal. Higher heating value: gasoline 120,388–124,340 Btu/gal; ethanol 84,530 Btu/gal.
Ratio of ethanol to gasoline: lower heating value 0.658 to 0.681; higher heating value 0.680 to 0.702.
Missouri ethanol plants (U.S. Energy Information Administration)
As of January 1, 2025, Missouri had 6 fuel ethanol plants with a production capacity of 338 million gallons per year. The U.S. total was 191 plants and 18,477 million gallons per year. Missouri’s share of U.S. capacity is 338 ÷ 18,477 = 1.8 percent.
Sources: Chemistry LibreTexts: Bond Energies (Table T3) (chem.libretexts.org); NIST Chemistry WebBook: ethanol (gas-phase thermochemistry) (webbook.nist.gov); NIST Chemistry WebBook: carbon dioxide (webbook.nist.gov); NIST Chemistry WebBook: water (webbook.nist.gov); NIST Chemistry WebBook: octane (webbook.nist.gov); NIST Chemistry WebBook: methane (webbook.nist.gov); NIST Chemistry WebBook: propane (webbook.nist.gov); U.S. DOE Alternative Fuels Data Center: Fuel Properties Comparison (afdc.energy.gov); U.S. EIA: U.S. Fuel Ethanol Plant Production Capacity (eia.gov); NIST atomic weights and isotopic compositions (physics.nist.gov)