
classify ionic, covalent and metallic bonds from electronegativity and valence electrons, draw Lewis structures for simple molecules and ions, and ask questions about how bonding explains what Missouri limestone does.
Instruction
The phenomenon. Missouri is called the Cave State for a reason. The Missouri Department of Natural Resources counts more than 7,500 caves, more than 16,000 known sinkholes and more than 4,400 springs, and says that karst country like this forms when groundwater dissolves soluble rock such as limestone or dolomite. The same rock is also a Missouri industry. The U.S. Geological Survey lists Missouri second in cement output in 2025, behind Texas, as one of four leading lime-producing states, and fourth in crushed stone. So one kind of rock does three jobs that look like they contradict each other: it is hard enough to carry a highway, it slowly dissolves in rainwater to hollow out caves, and it falls apart in a kiln to make lime. Two questions drive this unit. What are the particles in limestone, and what holds them together? And how can the way particles are held together explain all three behaviors?
All bonding is electrical. Limestone is mostly calcium carbonate, CaCO3. Every attraction between particles comes from one force: opposite charges attract and like charges repel, more strongly when the charges are larger and the distance is smaller. Chemists sort the strong attractions into three types by what the charged particles are.
Ionic bonding. When a metal meets a nonmetal, valence electrons can transfer completely. In CaCO3 each calcium atom gives up its two valence electrons to become Ca2+, and the carbonate group, CO32−, carries a 2− charge. The ions pack into a repeating lattice in which every Ca2+ is surrounded by carbonate ions and vice versa. The attraction acts in every direction, so a crystal is one giant bonded unit. The size of the charges matters: sodium chloride (1+ and 1−) melts at 800.7 °C, but magnesium oxide (2+ and 2−, a charge product of 4 instead of 1) melts at 2,825 °C and calcium oxide at 2,613 °C. MgO melts higher than CaO because Mg2+ is the smaller ion, so its charges sit closer together.
Covalent bonding. Inside the carbonate group, carbon and oxygen are both nonmetals. Neither gives up electrons, so they share pairs. To draw a Lewis structure, (1) count valence electrons: for CO32− that is 4 (C) + 3 × 6 (O) + 2 (the charge) = 24; (2) put the least electronegative atom, carbon, in the center and join it to each oxygen with a single bond, using 6 electrons; (3) add lone pairs to complete each oxygen’s octet; (4) if the center lacks an octet, turn a lone pair from an oxygen into a second bond. The result has one C=O double bond and two C–O single bonds. Formal charge = valence electrons − nonbonding electrons − bonds. The double-bonded oxygen is 6 − 4 − 2 = 0, each single-bonded oxygen is 6 − 6 − 1 = −1, and carbon is 4 − 0 − 4 = 0, so the total is 0 + 0 − 1 − 1 = −2, matching the ion’s charge. In real carbonate the double bond is shared equally among all three oxygens (resonance), so all three bonds are identical.
Metallic bonding. In a metal such as the lead mined in Missouri, atoms release valence electrons into a shared “sea” that moves through a lattice of positive ions. That is why metals conduct electricity and bend without breaking.
Predicting the bond type. Electronegativity (Pauling scale) measures how strongly an atom pulls on shared electrons. As a working guideline, a difference below 0.4 is nonpolar covalent, 0.4 to 1.8 is polar covalent, and above 1.8 is ionic. Calcium–oxygen: 3.44 − 1.00 = 2.44, ionic. Carbon–oxygen: 3.44 − 2.55 = 0.89, polar covalent. So CaCO3 contains both bond types: ionic between Ca2+ and the carbonate group, polar covalent within it.
Back to the rock. Rainwater made slightly acidic by dissolved carbon dioxide pulls ions out of the lattice, which is why limestone dissolves into caves. Heat breaks the carbonate group itself: CaCO3 → CaO + CO2. The molar masses are 100.086, 56.077 and 44.009 g/mol, so every 1,000 kg of pure limestone leaves 560.3 kg of lime and sends 439.7 kg of carbon dioxide gas up the stack (560.3 + 439.7 = 1,000.0 kg: mass is conserved). In the next lesson you will test how bonding shows up in kitchen materials.
📖 Read for this lesson
The reading opens over the lesson; close it to come back to exactly where you were. The checks below draw on it.
Formative check
Work through these before moving on. They are not graded — they tell you whether the standard below has landed yet.
A piece of Missouri limestone is heated in a kiln hot enough to break down calcium carbonate. What do you predict about the mass of the solid that remains?
Use the electronegativity table in this lesson’s reading. The Ca–O difference is 2.44 and the C–O difference is 0.89. Which statement about calcium carbonate is correct?
The carbonate ion has valence electrons to place in its Lewis structure, and each singly bonded oxygen has a formal charge of .
Magnesium oxide melts at a higher temperature than sodium chloride partly because its ions carry larger charges.
Write three questions about Missouri limestone: one you could answer with the data in this lesson’s reading, one you could test with a household material, and one that needs a model of the bonding in calcium carbonate. Circle the question you most want answered by the end of the unit.
How confident are you that you can classify a bond as ionic, polar covalent, nonpolar covalent or metallic and draw a Lewis structure with formal charges for a simple molecule or ion?
Practice
Work these on paper or in your notebook, then open Check your answer. Aim for all of Fluency and Application; try at least one Challenge.
Printable version: this unit’s practice workbook (PDF)
Fluency
Build speed and accuracy with the core skill.
- Electronegativities: Ca 1.00, O 3.44. Find the difference and classify the Ca–O bond.
Check your answer
Answer: 2.44; ionic3.44 − 1.00 = 2.44, above about 1.8. - Electronegativities: C 2.55, O 3.44. Find the difference and classify the C–O bond.
Check your answer
Answer: 0.89; polar covalent3.44 − 2.55 = 0.89, between 0.4 and 1.8. - Electronegativities: Mg 1.31, Cl 3.16. Find the difference and classify the Mg–Cl bond.
Check your answer
Answer: 1.85; ionic3.16 − 1.31 = 1.85, just above 1.8, so ionic. - Electronegativities: C 2.55, H 2.20. Classify the C–H bond.
Check your answer
Answer: Nonpolar covalent (difference 0.35)2.55 − 2.20 = 0.35, below about 0.4. - Count the valence electrons to place in the Lewis structure of (a) CO2, (b) NH3, (c) OH−.
Check your answer
Answer: (a) 16; (b) 8; (c) 8(a) 4 + 2(6) = 16. (b) 5 + 3(1) = 8. (c) 6 + 1 + 1 (negative charge) = 8. - Write the formulas of the compounds formed by (a) Ca2+ and Cl−, (b) Al3+ and O2−, (c) Na+ and CO32−.
Check your answer
Answer: (a) CaCl2; (b) Al2O3; (c) Na2CO3Balance the charges: (a) 2+ needs 2 × 1−; (b) 2 × 3+ = 6+ balances 3 × 2− = 6−; (c) 2 × 1+ balances 2−. - Using the atomic weights in this lesson’s reading, find the molar mass of calcium carbonate, CaCO3.
Check your answer
Answer: 100.086 g/mol (about 100.1)40.078 + 12.011 + 3(15.999) = 100.086 g/mol.
Application
Use the skill in context. Show your reasoning.
- A kiln burns 250 kg of pure limestone (CaCO3) to CaO and CO2. Use molar masses 100.086, 56.077 and 44.009 g/mol to find the mass of lime and the mass of CO2 produced.
Check your answer
Answer: 140.1 kg CaO and 109.9 kg CO2Fraction CaO = 56.077 ÷ 100.086 = 0.5603; 250 × 0.5603 = 140.1 kg. CO2 = 250 × 44.009 ÷ 100.086 = 109.9 kg. Check: 140.1 + 109.9 = 250.0 kg. - USGS estimates 1.5 billion tons of crushed stone were produced in the United States in 2025, 17% of it for cement manufacturing and 6% for lime manufacturing. How many million tons went to each use?
Check your answer
Answer: 255 million tons for cement; 90 million tons for lime1,500 million × 0.17 = 255 million; 1,500 million × 0.06 = 90 million. - Describe the Lewis structure of CO2 in words and compute the formal charge on carbon and on each oxygen.
Check your answer
Answer: Carbon in the center with a double bond to each oxygen and two lone pairs on each oxygen; formal charges: C 0, each O 0.C: 4 − 0 − 4 bonds = 0. Each O: 6 − 4 − 2 bonds = 0. All 16 valence electrons are used: 4 bonds (8 e−) + 4 lone pairs (8 e−). - Predict which has the higher melting point, MgO or NaCl, and give two reasons from the properties of the ions.
Check your answer
Answer: MgO. Its ions are 2+ and 2− (charge product 4 versus 1 for NaCl), and Mg2+ is small, so the ions sit close together.Electrical force grows with charge and falls with distance. Published values: MgO 2,825 °C, NaCl 800.7 °C.
Challenge
Stretch problems. Expect to think before you write.
- A Missouri limestone sample is 94.0% CaCO3 by mass (an illustrative value; the rest is clay and quartz that do not decompose). How many kilograms of lime come from 1,000 kg of this stone, assuming all the carbonate breaks down?
Check your answer
Answer: 526.7 kg CaOCaCO3 present = 1,000 × 0.940 = 940 kg. Lime = 940 × 56.077 ÷ 100.086 = 526.7 kg. - In carbonate, all three C–O bonds have the same length, but the Lewis structure shows one double and two single bonds. Explain how resonance resolves this and give the average bond order.
Check your answer
Answer: Three equivalent structures differ only in which oxygen holds the double bond; the real ion is an average of them. Average bond order = (2 + 1 + 1) ÷ 3 = 1.33.The double bond is spread over all three oxygens, so each C–O bond is identical, and each oxygen carries about −2/3 of a charge. (2 + 1 + 1) ÷ 3 = 1.33.
Review
Keep earlier skills sharp.
- Write the full electron configuration of calcium (Z = 20) and state the charge of the ion it forms and why.
Check your answer
Answer: 1s22s22p63s23p64s2; Ca2+Losing the two 4s electrons leaves the stable argon configuration 1s22s22p63s23p6. - NIST lists chlorine-35 (34.969 u, 75.76%) and chlorine-37 (36.966 u, 24.24%). Calculate the average atomic mass of chlorine.
Check your answer
Answer: 35.45 u0.7576 × 34.969 + 0.2424 × 36.966 = 26.49 + 8.961 = 35.45.
Limestone, Lime and Bonding: Missouri Data and a Bond-Type Table
USGS Mineral Commodity Summaries 2026 (Cement, Lime, Stone (crushed)); Missouri DNR, Karst in Missouri; NIST atomic weights; PubChem melting-point records; Pauling electronegativity reference values; SLS calculations; retrieved Nov. 15, 2026 · Public domain (U.S. and Missouri government works and NIST data), with reference values and SLS commentary
Why this reading. The lesson’s phenomenon is a rock, and its quiz and practice ask for numbers. This reading gives you the government facts about Missouri limestone, cement, lime and caves, the electronegativity table with every difference already computed so you can check your own, the melting points that show how charge size matters, atomic weights, and the lecture’s heating-limestone calculation worked out in full.
Missouri limestone by the numbers
The Missouri Department of Natural Resources describes karst as a landscape of springs, sinkholes, losing streams and caves, created as groundwater dissolves soluble rock such as limestone or dolomite. Its karst page reports more than 7,500 caves, more than 16,000 known sinkholes and more than 4,400 springs in Missouri.
| Fact (2025 estimates unless noted) | Value | Source |
|---|---|---|
| Missouri rank in U.S. cement production | Second, behind Texas, among the four leading states, which together made about 44% of the U.S. total | USGS Mineral Commodity Summaries 2026, Cement |
| Missouri in lime production | One of four leading states (Alabama, Missouri, Ohio, Texas) | USGS MCS 2026, Lime |
| Missouri rank in crushed stone | Fourth by tonnage (after Texas, Pennsylvania, Florida) | USGS MCS 2026, Stone (crushed) |
| U.S. crushed stone produced | 1.5 billion tons; about 70% limestone and dolomite | USGS MCS 2026, Stone (crushed) |
| Share of crushed stone used for cement manufacturing / lime manufacturing | 17% / 6% | USGS MCS 2026, Stone (crushed) |
| Missouri karst features | More than 7,500 caves; more than 16,000 sinkholes; more than 4,400 springs | Missouri DNR, Karst in Missouri |
SLS calculation from the USGS shares: 17% of 1,500 million tons is 255 million tons for cement and 6% is 90 million tons for lime.
Electronegativity differences
Pauling-scale electronegativities are reference values compiled in standard tables. Differences are computed by SLS. Guideline: below 0.4 nonpolar covalent; 0.4 to 1.8 polar covalent; above 1.8 ionic. These are working cut-offs, not sharp walls.
| Bond | Electronegativities | Difference | Predicted type |
|---|---|---|---|
| Ca–O | 1.00 / 3.44 | 2.44 | ionic |
| Na–Cl | 0.93 / 3.16 | 2.23 | ionic |
| Mg–O | 1.31 / 3.44 | 2.13 | ionic |
| Mg–Cl | 1.31 / 3.16 | 1.85 | ionic |
| Si–O | 1.90 / 3.44 | 1.54 | polar covalent |
| H–O | 2.20 / 3.44 | 1.24 | polar covalent |
| C–O | 2.55 / 3.44 | 0.89 | polar covalent |
| C–H | 2.55 / 2.20 | 0.35 | nonpolar covalent |
| N–H | 3.04 / 2.20 | 0.84 | polar covalent |
Melting points show the effect of charge
Melting points as listed in PubChem (National Library of Medicine), which compiles handbook values; where PubChem lists a range the most commonly listed value is used.
| Compound | Ions | Charge product | Melting point (°C) |
|---|---|---|---|
| Sodium chloride, NaCl | Na+, Cl− | 1 × 1 = 1 | 800.7 |
| Calcium oxide (lime), CaO | Ca2+, O2− | 2 × 2 = 4 | 2,613 |
| Magnesium oxide, MgO | Mg2+, O2− | 2 × 2 = 4 | 2,825 |
| Calcium carbonate, CaCO3 | Ca2+, CO32− | 2 × 2 = 4 | Decomposes on heating (PubChem lists about 825 to 1,340 °C, converted from a NIOSH entry of 1,517 to 2,442 °F) |
Atomic weights (NIST conventional values, g/mol)
| Element | Atomic weight | Element | Atomic weight |
|---|---|---|---|
| H | 1.008 | Ca | 40.078 |
| C | 12.011 | Mg | 24.305 |
| O | 15.999 | Na | 22.990 |
| Cl | 35.45 | Si | 28.085 |
Valence-electron counts for Lewis structures
| Species | Count | Total valence electrons |
|---|---|---|
| CO32− | 4 + 3(6) + 2 | 24 |
| CO2 | 4 + 2(6) | 16 |
| H2O | 2(1) + 6 | 8 |
| NH3 | 5 + 3(1) | 8 |
| CH4 | 4 + 4(1) | 8 |
| OH− | 6 + 1 + 1 | 8 |
| Cl2 | 2(7) | 14 |
Worked example: heating limestone
Molar masses: CaCO3 100.086 g/mol; CaO 56.077 g/mol; CO2 44.009 g/mol. For CaCO3 → CaO + CO2, one mole gives one mole of each. Per 1,000 kg of pure CaCO3: CaO = 1,000 × 56.077 ÷ 100.086 = 560.3 kg; CO2 = 1,000 × 44.009 ÷ 100.086 = 439.7 kg; total 1000.0 kg, so mass is conserved. Per 250 kg: 140.1 kg CaO and 109.9 kg CO2.
Sources: USGS, Mineral Commodity Summaries 2026: Cement (pubs.usgs.gov); USGS, Mineral Commodity Summaries 2026: Lime (pubs.usgs.gov); USGS, Mineral Commodity Summaries 2026: Stone (crushed) (pubs.usgs.gov); Missouri Department of Natural Resources, Karst in Missouri (dnr.mo.gov); NIST, Atomic Weights and Isotopic Compositions (physics.nist.gov); PubChem (NLM), melting-point records for NaCl, MgO, CaO and CaCO3 (pubchem.ncbi.nlm.nih.gov); Electronegativities of the elements (data page), Pauling scale, reference values (en.wikipedia.org)