THE VR SCHOOL
  • Schools & Districts
    • License the academy
    • Free program for your students
    • Request a demo
  • Catalog
    • AI & Data
    • Cybersecurity & Web
    • Programming
    • Health Science
    • All Guilds
    • All courses
  • Families
  • Accreditation
  • Log In
  • Request a demo
  • Home
  • Courses

RLP Chemistry A — Atoms, Bonding, Reactions, Gases and Solutions

Curriculum

  • 4 Sections
  • 20 Lessons
  • 10 Weeks
Expand all sectionsCollapse all sections
  • Unit 1: Atoms, Electrons and the Periodic Table
    5
    • 1.1
      Lead in Missouri: What Is an Atom of an Element?
      50 mins
    • 1.2
      Metals, Nonmetals and Reactivity Patterns
      100 mins
    • 1.3
      Arguing from Periodic Trends
      50 mins
    • 1.4
      Modeling Electrons: Configurations and Line Spectra
      50 mins
    • 1.5
      Performance Task: Element Brief on Lead, Missouri’s Useful and Hazardous Metal
      150 mins
  • Unit 2: Bonding, Structure and the Properties of Materials
    5
    • 2.1
      Missouri Limestone: One Rock, Three Kinds of Bonding
      50 mins
    • 2.2
      Shape, Polarity and Forces: A Kitchen Investigation
      100 mins
    • 2.3
      Why Ethanol Boils Higher Than Its Twin: Arguing from NIST Data
      50 mins
    • 2.4
      Structure Sets the Job: Metals, Ceramics, Network Solids and Polymers
      50 mins
    • 2.5
      Performance Task: A Materials-Selection Brief for a Missouri Application
      150 mins
  • Unit 3: Reactions, the Mole and Stoichiometry
    5
    • 3.1
      Missouri Lead: Writing, Naming and Balancing Reactions
      50 mins
    • 3.2
      Sealed Bag, Open Cup: Conservation of Mass and the Mole
      100 mins
    • 3.3
      Which Reactant Runs Out? Limiting Reagent and Percent Yield
      50 mins
    • 3.4
      The Mole Bridge: Mass-to-Mass Stoichiometry for Missouri Lead
      50 mins
    • 3.5
      Performance Task: Ammonia for Missouri Corn, a Stoichiometry Brief
      150 mins
  • Unit 4: Gases, Solutions and the Energy of Reactions
    5
    • 4.1
      The Tire Light on a Missouri Morning: Gas Particles and Gas Laws
      50 mins
    • 4.2
      A Syringe in an Ice Bath: Finding Absolute Zero from Gas Volumes
      100 mins
    • 4.3
      Lead in the Tap: Concentration, Dilution and Parts per Billion
      50 mins
    • 4.4
      Bond Energies and Fuels: Why Ethanol Releases Less Energy than Gasoline
      100 mins
    • 4.5
      Performance Task — A Quantitative Brief: Lead in Water or Ethanol Fuel Energy
      150 mins

The Tire Light on a Missouri Morning: Gas Particles and Gas Laws

Unit 4  ·  Phenomenon Launch & Questioning  ·  Lesson 16 of 20

The Tire Light on a Missouri Morning: Gas Particles and Gas Laws

9-12.PS1.A.3RLP-CHEMA
A tire gauge on a frosted tire with faint gas particles inside.
By the end of this lesson I can…

use the kinetic-molecular model to explain how the pressure, volume, temperature and amount of a gas are related, and solve gas-law problems with the ideal gas equation.

Instruction

The phenomenon. On August 29, 2023, a U.S. Geological Survey crew sampling the Missouri River at Hermann, Missouri, recorded an air temperature of 32.2 °C (90 °F). On January 19, 2022, a crew at the same station recorded −2.2 °C (28 °F) (USGS records, this lesson’s reading). Suppose a driver fills a tire to 32 psi on the first kind of afternoon and then leaves the car outside overnight on the second kind of morning. The dashboard tire light comes on, and a gauge reads about 26.7 psi, a drop of 5.3 psi. No air leaked out. Where did the pressure go?

The kinetic-molecular model. A gas is mostly empty space. Its particles are tiny compared with the distances between them, they move in straight lines in random directions, they collide with each other and with the walls, and they attract each other very little. Pressure is the force of all those wall collisions divided by the wall area. Temperature in kelvins is proportional to the average kinetic energy of the particles. At 293.15 K the average nitrogen molecule moves at roughly 511 m/s (the root-mean-square speed, u = √(3RT/M)), and a hydrogen molecule at about 1,904 m/s, because at the same temperature lighter particles must move faster to carry the same average energy. Cool the tire and the particles slow down, hit the wall less often and less hard, and the pressure falls.

Always use kelvins, and absolute pressure. Kelvin temperature is Celsius plus 273.15, so 32.2 °C is 305.35 K and −2.2 °C is 270.95 K. Gas laws use absolute pressure, which counts from a perfect vacuum. A tire gauge reads gauge pressure, which is the amount above the air outside, so you add about 14.696 psi (101.325 kPa, one standard atmosphere, a defined value) before calculating. For the tire: 32 + 14.696 = 46.696 psi absolute. The air in the tire stays the same amount and nearly the same volume, so pressure is proportional to temperature: 46.696 × 270.95 ÷ 305.35 = 41.44 psi absolute, which is 26.7 psi on the gauge. An often-quoted rule of thumb, about 1 psi per 10 °F of change, would predict 6.2 psi here; the model gives 0.88 psi per 10 °F at 32 psi, in the same range as the rule.

The gas laws are one idea in different dress. Boyle’s law: at constant temperature and amount, PV is constant. Push a 60.0 mL sealed syringe at 101.3 kPa down to 24.0 mL and the pressure becomes 101.3 × 60.0 ÷ 24.0 = 253 kPa. Charles’s law: at constant pressure, V÷T is constant, so volume must be compared in kelvins. Gay-Lussac’s law: at constant volume, P÷T is constant, which is the tire. Combine them: P1V1÷T1 = P2V2÷T2. A 10.0 mL bubble at 3.0 atm and 275 K that rises to 1.0 atm at 295 K grows to 10.0 × (3.0 ÷ 1.0) × (295 ÷ 275) = 32.2 mL.

The ideal gas equation. Add the amount of gas and you get PV = nRT. The gas constant, from the National Institute of Standards and Technology (CODATA 2022), is R = 8.314462618 J/(mol·K); dividing by 101,325 Pa per atmosphere and converting m3 to L gives 0.082057 L·atm/(mol·K). Worked example: how much gas is 1.00 g of carbon dioxide (M = 12.011 + 2 × 15.999 = 44.009 g/mol)? n = 1.00 ÷ 44.009 = 0.02272 mol. At 1.000 atm and 293.15 K its volume is V = nRT÷P = 0.02272 × 0.082057 × 293.15 ÷ 1.000 = 0.547 L. At 273.15 K and 101.325 kPa one mole of any ideal gas occupies 22.414 L.

Where the model fails. Real gases are not ideal at high pressure or low temperature, because particles do have volume and do attract each other; a gas then condenses to a liquid, and the laws stop working. Nitrogen at room conditions behaves almost ideally.

Your questions. Build a question board: what could you measure at home about a gas (volume, temperature, a sealed syringe)? What needs published data? What would you need a particle model to answer?

📖 Read for this lesson

The reading opens over the lesson; close it to come back to exactly where you were. The checks below draw on it.

  • Gas Constants, Tire Pressure and Particle Speeds: Data for Lesson 4.1NIST CODATA 2022 values for R and the standard atmosphere; U.S. Geological Survey National Water Information System air-temperature records for Missouri River at Hermann, MO (USGS 06934500), retrieved through the Water Quality Portal; NIST atomic weights; tire rule of thumb from a vehicle-maker service bulletin hosted by NHTSA; all retrieved 2026-11-15. Tire and speed tables are SLS worked calculations · about 2 min

    NIST constants, the USGS air temperatures and the full tire-pressure and particle-speed tables behind the lesson’s phenomenon, so every step of the gas-law reasoning can be checked.

Vocabulary in context

  • pressure — The force that gas particles exert on a surface divided by the area, from countless collisions with it.
  • kinetic-molecular theory — The model of a gas as tiny particles in constant random motion with negligible volume and almost no attractions.
  • absolute pressure — Pressure measured from a perfect vacuum; gauge pressure plus the pressure of the surrounding air.
  • kelvin — The SI temperature unit, where 0 K is absolute zero and 273.15 K is 0 °C.
  • ideal gas equation — PV = nRT, which relates pressure, volume, amount and temperature of an ideal gas.
  • root-mean-square speed — A kind of average speed of gas particles, √(3RT/M), with M in kg/mol.

Formative check

Work through these before moving on. They are not graded — they tell you whether the standard below has landed yet.

Make a prediction

A sealed, rigid container of air is moved from a warm room into a freezer. No air can enter or leave. What happens to the pressure inside, and why?

It falls. The amount and volume are fixed, but cooling lowers the average particle speed, so there are fewer and weaker wall collisions. The pressure does not reach zero, because the particles still move.
+50 XP

A 50.0 mL gas sample at 1.00 atm is compressed to 20.0 mL at constant temperature. The new pressure is

Boyle’s law: P2 = 1.00 atm × 50.0 ÷ 20.0 = 2.50 atm. Smaller volume, higher pressure.
Fill in the blank

Use the data table in this lesson’s reading. A tire filled to 32 psi gauge at 32.2 °C reads about psi gauge at 0 °C (to the nearest 0.1 psi).

Simulation & tools

Gas Properties: pressure, volume and temperature

Open the Ideal screen. (1) Pump in about 100 particles, fix the volume, and record the pressure at the starting temperature. (2) Heat the gas to about double the starting temperature and record the pressure; compute pressure ÷ temperature for both. (3) Return to the start, then hold the temperature fixed and make the container half as wide; record the pressure and compute pressure × volume. (4) Explain each result in two sentences with wall collisions. No device? Use the tire table in this lesson’s reading: compute gauge-plus-14.696 psi absolute pressure divided by kelvin temperature for three rows and show that it is constant.

Open in a new tab ↗  ·  PhET Interactive Simulations, University of Colorado Boulder · CC BY 4.0

Use the tire table in this lesson’s reading. Pick two temperatures from the table, convert them to kelvins and the gauge pressure to absolute pressure, and show that P ÷ T is the same for both. Then explain in particle terms why the gauge pressure falls as the temperature falls.

0 words
Quick self-check

How confident are you that you can explain gas pressure with the kinetic-molecular model and use PV = nRT with kelvins and absolute pressure?

Not yetVery confident

Practice

Work these on paper or in your notebook, then open Check your answer. Aim for all of Fluency and Application; try at least one Challenge.

Printable version: this unit’s practice workbook (PDF)

Fluency

Build speed and accuracy with the core skill.

  1. Convert 25 °C, −10 °C and 100 °C to kelvins.
    Check your answer
    Answer: 298.15 K; 263.15 K; 373.15 K
    Add 273.15 to each Celsius value.
  2. In the kinetic-molecular model, what is assumed about the volume of the particles and the forces between them?
    Check your answer
    Answer: The particles’ own volume is negligible compared with the space between them, and they attract each other very little.
  3. A gas at 1.0 atm occupies 2.0 L. At constant temperature it expands to 4.0 L. What is its new pressure?
    Check your answer
    Answer: 0.50 atm
    P2 = 1.0 × 2.0 ÷ 4.0 = 0.50 atm.
  4. A balloon holds 600 mL of air at 300 K. At constant pressure it is cooled to 250 K. What is its new volume?
    Check your answer
    Answer: 500 mL
    V2 = 600 × 250 ÷ 300 = 500 mL.
  5. A tire gauge reads 220 kPa. Atmospheric pressure is 101.325 kPa. What is the absolute pressure in the tire?
    Check your answer
    Answer: 321 kPa (321.3 kPa)
    Add: 220 + 101.325 = 321.325 kPa.

Application

Use the skill in context. Show your reasoning.

  1. A sealed 60.0 mL syringe of air at 101.3 kPa is pushed in to 24.0 mL at constant temperature. What is the new pressure, and what causes the increase in particle terms?
    Check your answer
    Answer: 253 kPa. The same particles hit a smaller wall area more often, so the pressure rises.
    P2 = 101.3 × 60.0 ÷ 24.0 = 253.3 kPa.
  2. A tire is filled to 35 psi gauge at 25 °C. Overnight it cools to −5 °C with no leak and no volume change. What does the gauge read? (Atmospheric pressure 14.696 psi.)
    Check your answer
    Answer: 30.0 psi gauge (a drop of 5.0 psi)
    Absolute: 35 + 14.696 = 49.696 psi. P2 = 49.696 × 268.15 ÷ 298.15 = 44.696 psi. Gauge: 44.696 − 14.696 = 30.0 psi.
  3. How many moles of gas are in 2.50 L at 1.00 atm and 300 K? Use R = 0.082057 L·atm/(mol·K).
    Check your answer
    Answer: 0.102 mol (0.1016 mol)
    n = PV ÷ RT = (1.00 × 2.50) ÷ (0.082057 × 300) = 0.1016 mol.
  4. A gas sample of mass 0.850 g occupies 0.250 L at 100.0 kPa and 350 K. Find the molar mass (use R = 8.314 J/(mol·K) and convert to m3 and Pa).
    Check your answer
    Answer: About 98.9 g/mol
    n = PV ÷ RT = (100,000 × 0.000250) ÷ (8.314462618 × 350) = 0.008591 mol. M = 0.850 ÷ 0.008591 = 98.9 g/mol.

Challenge

Stretch problems. Expect to think before you write.

  1. A 10.0 mL bubble at 3.0 atm and 275 K rises to 1.0 atm and 295 K. Find its new volume and say which change, pressure or temperature, matters more.
    Check your answer
    Answer: 32.2 mL. The pressure change (a factor of 3.0) matters far more than the temperature change (a factor of 1.07).
    V2 = 10.0 × (3.0 ÷ 1.0) × (295 ÷ 275) = 32.2 mL.
  2. Compare the root-mean-square speeds of H2 (2.016 g/mol) and N2 (28.014 g/mol) at 293.15 K. Why does the lighter gas move faster although both have the same average kinetic energy?
    Check your answer
    Answer: H2 is about 1,904 m/s and N2 about 511 m/s, a ratio of 3.73. Kinetic energy is ½mu2, so with equal energy the lighter particle must have the larger speed.
    u = √(3RT/M): ratio = √(28.014 ÷ 2.016) = 3.73. For N2: √(3 × 8.314462618 × 293.15 ÷ 0.028014) = 511 m/s.

Review

Keep earlier skills sharp.

  1. How many moles are in 10.0 g of carbon dioxide (44.009 g/mol)?
    Check your answer
    Answer: 0.227 mol (0.2272 mol)
    10.0 ÷ 44.009 = 0.2272 mol.
  2. What mass of CO2 is 0.500 mol, and what volume does that much gas occupy at 293.15 K and 1.000 atm?
    Check your answer
    Answer: 22.0 g; 12.0 L
    Mass: 0.500 × 44.009 = 22.0 g. Volume: 0.500 × 0.082057 × 293.15 ÷ 1.000 = 12.0 L.

Missouri Learning Standards — Science addressed: 9-12.PS1.A.3, SEP.5, CCC.3, RST.9-10.4

Instructional focus: Particle motion explains how pressure, volume and temperature of a gas are related

Reading

Gas Constants, Tire Pressure and Particle Speeds: Data for Lesson 4.1

NIST CODATA 2022 values for R and the standard atmosphere; U.S. Geological Survey National Water Information System air-temperature records for Missouri River at Hermann, MO (USGS 06934500), retrieved through the Water Quality Portal; NIST atomic weights; tire rule of thumb from a vehicle-maker service bulletin hosted by NHTSA; all retrieved 2026-11-15. Tire and speed tables are SLS worked calculations · SLS original (prose and worked calculations); NIST and USGS values are U.S. government data in the public domain; one rule-of-thumb figure paraphrased from a bulletin hosted by NHTSA, cited by link

Why this reading. The lesson’s phenomenon, a tire light after a cold night, is reasoned through with a few numbers. This reading gives the two USGS air temperatures, the gas constant from NIST, a full tire-pressure table you can check your own calculation against, and the particle speeds behind the kinetic-molecular model.

The two Missouri temperatures

USGS crews record air temperature when they collect water samples. At Missouri River at Hermann, Missouri (station 06934500), the records pulled for this lesson (sampling dates from 2020 on) include an air temperature of 32.2 °C on August 29, 2023 and −2.2 °C on January 19, 2022. They are two different visits, used here as a warm afternoon and a cold morning. The difference is 34.4 °C, or 61.9 °F.

Constants (NIST, CODATA 2022)

  • Molar gas constant R = 8.314462618 J/(mol·K) (listed as exact).
  • Standard atmosphere = 101,325 Pa (exact). Dividing R by it and converting m3 to L: 0.082057 L·atm/(mol·K).
  • Avogadro constant = 6.02214076 × 1023 per mole (exact).
  • Atomic weights used (NIST, conventional values): H 1.008, C 12.011, N 14.007, O 15.999.

Tire pressure from 32 psi (gauge) at 32.2 °C

Assumptions: the same amount of air, the same volume, and atmospheric pressure of 14.696 psi. Absolute pressure = gauge + 14.696. The last column should be constant if pressure is proportional to temperature.

Temperature (°C)Temperature (K)Absolute pressure (psi)Gauge pressure (psi)Pressure ÷ temperature (psi/K)
32.2305.3546.7032.00.1529
21294.1544.9830.30.1529
10283.1543.3028.60.1529
0273.1541.7727.10.1529
-2.2270.9541.4426.70.1529
-10263.1540.2425.50.1529

The pressure drops 5.3 psi for the 34.4 °C (61.9 °F) change, or about 0.88 psi per 10 °F at 32 psi gauge. A vehicle-maker service bulletin hosted by the National Highway Traffic Safety Administration states a rule of thumb of about 1 psi for every 10 °F, which is in the same range. A real tire also changes volume slightly, so the model is an estimate.

Root-mean-square speeds, u = √(3RT/M), in m/s

GasMolar mass (g/mol)at 273.15 Kat 293.15 Kat 308.15 K
Hydrogen, H22.0161,8381,9041,953
Nitrogen, N228.014493511524
Carbon dioxide, CO244.009393408418

Gas amounts

At 273.15 K and 101.325 kPa one mole of an ideal gas occupies 22.414 L. At 293.15 K and 1.000 atm, 1.00 g of CO2 (0.02272 mol) occupies 0.547 L.

Sources: NIST CODATA: molar gas constant (physics.nist.gov); NIST CODATA: standard atmosphere (physics.nist.gov); USGS records via Water Quality Portal, station USGS-06934500 (waterqualitydata.us); NIST atomic weights and isotopic compositions (physics.nist.gov); Vehicle-maker service bulletin hosted by NHTSA (tire pressure and outside temperature) (static.nhtsa.gov)

Up NextComplete & Continue →

Leave a Reply Cancel reply

Performance Task: Ammonia for Missouri Corn, a Stoichiometry Brief
Prev
A Syringe in an Ice Bath: Finding Absolute Zero from Gas Volumes
Next

© 2026 The VR School | Career content by Wiley | Powered by Sejal Learning Systems.

Join free · Accreditation · Privacy Policy · Terms of Service

Modal title

Main Content