
use a mole-bridge model with molar masses and mole ratios to predict the mass of a product or reactant in a multi-step Missouri lead process and show that the calculation conserves mass.
Instruction
A model for any mass problem. A balanced equation is a recipe in particles, and the mole is the bridge between particles and the grams you can weigh. Every mass-to-mass problem uses the same three-step map: grams of A → moles of A → moles of B → grams of B. Step one divides by the molar mass of A, step two multiplies by the mole ratio (coefficient of B ÷ coefficient of A), and step three multiplies by the molar mass of B. The coefficients appear only in the middle step; they are never mass ratios. In Pb + PbO2 + 2H2SO4 → 2PbSO4 + 2H2O, one mole of Pb reacts with 2 mol of H2SO4, but that is 207.2 g of lead and 196.1 g of acid, not 1 : 2 by mass.
Example 1: lead from galena. A smelter treats 1,000 kg of pure PbS (239.26 g/mol). The EPA describes the first step as oxidizing the sulfide to the oxide with the release of SO2: 2PbS + 3O2 → 2PbO + 2SO2. Lead is conserved atom for atom, since each PbS gives one PbO and later one Pb, so 1 mol PbS → 1 mol Pb. Moles of PbS = 1,000,000 g ÷ 239.26 = 4,179.6 mol. Mass of lead = 4,179.6 mol × 207.2 g/mol = 866.0 kg, which is 86.60% of the PbS by mass, the most lead the sample can ever give.
Sulfur does not vanish. The same 4,179.6 mol of PbS gives 4,179.6 mol of SO2 (ratio 2 : 2), which weighs 267.7 kg (64.058 g/mol). The EPA notes the strong SO2 gas may be piped to a sulfuric acid plant. If every sulfur atom ends up in H2SO4, then 4,179.6 mol of acid forms, which is 409.9 kg (98.072 g/mol). Mass check for the roasting step: oxygen needed = 4,179.6 mol × 1.5 × 31.998 g/mol = 200.6 kg, so reactants 1,000.0 + 200.6 = 1,200.6 kg, and products PbO 932.9 + SO2 267.7 = 1,200.6 kg.
Example 2: a battery in reverse. Discharging a lead-acid battery follows Pb + PbO2 + 2H2SO4 → 2PbSO4 + 2H2O. Add up one mole-equation: reactants 207.2 + 239.198 + 2(98.072) = 642.542 g; products 2(303.256) + 2(18.015) = 642.542 g. Mass is conserved to the last decimal. Now scale: if 1.00 kg of lead in the plates reacts, that is 4.826 mol of Pb, so 9.653 mol of H2SO4 (946.6 g) is used and 9.653 mol of PbSO4 (2,927.2 g) forms. A recycler working backward finds that each 1.00 kg of PbSO4 holds 0.683 kg of lead.
Example 3: from acid to salt. MDNR states that the recovered sulfuric acid is used to make sodium sulfate crystals but does not name the chemical route. One simple route is neutralization, H2SO4 + 2NaOH → Na2SO4 + 2H2O. Each 1.00 kg of H2SO4 needs 0.816 kg NaOH and gives 1.448 kg Na2SO4 and 0.367 kg water (1.000 + 0.816 = 1.816 = 1.816). Use the data in the lesson’s reading to check each result.
📖 Read for this lesson
The reading opens over the lesson; close it to come back to exactly where you were. The checks below draw on it.
Formative check
Work through these before moving on. They are not graded — they tell you whether the standard below has landed yet.
How much lead can 1,000 kg of pure PbS give at most (Pb 207.2 g/mol, PbS 239.26 g/mol)?
The SO2 released when 1,000 kg of pure PbS is roasted has a mass of kg (to 4 significant figures).
In 2PbS + 3O2 → 2PbO + 2SO2, the coefficients show that 3 g of oxygen react with every 2 g of PbS.
Use the mass-check table in this lesson’s reading. For one mole-equation of the battery reaction, what total mass of reactants reacts?
Draw and label a mole-bridge diagram (grams, moles, moles, grams) for making Na2SO4 from 1.00 kg of H2SO4 using H2SO4 + 2NaOH → Na2SO4 + 2H2O. Show the molar masses from this lesson’s reading, the mole ratio, the mass of NaOH needed and the mass of Na2SO4 made, and finish with a one-line check that mass in equals mass out.
How confident are you that you can use molar masses and mole ratios to predict product masses and check them against conservation of mass?
Practice
Work these on paper or in your notebook, then open Check your answer. Aim for all of Fluency and Application; try at least one Challenge.
Printable version: this unit’s practice workbook (PDF)
Fluency
Build speed and accuracy with the core skill.
- For 2PbS + 3O2 → 2PbO + 2SO2, how many moles of Pb can 5.00 mol of PbS give?
Check your answer
Answer: 5.00 mol of Pb (1 PbS : 1 Pb)Each PbS contains one Pb atom and the equation keeps lead atoms in a 1 : 1 ratio with PbS. - For the same equation, how many moles of O2 react with 4.00 mol of PbS?
Check your answer
Answer: 6.00 molMole ratio 3 O2 : 2 PbS; 4.00 × 3/2. - What is the mass of 2.50 mol of H2SO4?
Check your answer
Answer: 245.2 g2.50 × 98.072. - How many moles are in 500.0 g of lead?
Check your answer
Answer: 2.413 mol500.0 ÷ 207.2. - What is the mass of 3.00 mol of PbS?
Check your answer
Answer: 717.8 g3.00 × 239.26. - In Pb + PbO2 + 2H2SO4 → 2PbSO4 + 2H2O, how many moles of H2SO4 react with 1 mol of Pb, and is that ratio also the mass ratio?
Check your answer
Answer: 2 mol of H2SO4; no, it is a mole ratio (207.2 g of Pb reacts with 196.1 g of H2SO4)2 × 98.072 = 196.1 g, which is not twice 207.2 g.
Application
Use the skill in context. Show your reasoning.
- What mass of lead can 1,000 kg of pure PbS give at most?
Check your answer
Answer: 866.0 kg4,179.6 mol PbS → 4,179.6 mol Pb × 207.2 g/mol. - What mass of SO2 is released when 1,000 kg of pure PbS is roasted?
Check your answer
Answer: 267.7 kg2 PbS : 2 SO2, so 4,179.6 mol × 64.058 g/mol. - A recycler recovers lead from 1.00 kg of PbSO4. What mass of lead does it hold?
Check your answer
Answer: 0.683 kg1,000 ÷ 303.256 = 3.298 mol; 1 : 1; × 207.2. - Using H2SO4 + 2NaOH → Na2SO4 + 2H2O, find the mass of NaOH needed and Na2SO4 formed from 1.00 kg of H2SO4.
Check your answer
Answer: 0.816 kg NaOH; 1.448 kg Na2SO41,000 ÷ 98.072 = 10.197 mol; NaOH 2 × that × 39.997; Na2SO4 1 × that × 142.036.
Challenge
Stretch problems. Expect to think before you write.
- 1.00 kg of lead in a battery plate reacts in Pb + PbO2 + 2H2SO4 → 2PbSO4 + 2H2O. Find the mass of H2SO4 used and PbSO4 formed.
Check your answer
Answer: 946.6 g H2SO4; 2,927 g PbSO44.826 mol Pb; H2SO4 2 × 4.826 mol × 98.072; PbSO4 2 × 4.826 × 303.256. - For the same 1.00 kg of lead, calculate the mass of PbO2 consumed and the mass of water formed, then show that reactant mass equals product mass.
Check your answer
Answer: PbO2 1,154 g; H2O 173.9 g; reactants 3101.1 g = products 3101.1 gPbO2 4.826 × 239.198; H2O 2 × 4.826 × 18.015; 1,000 + 1,154.4 + 946.6 = 3,101.1 g.
Review
Keep earlier skills sharp.
- A cell has 3.00 mol Pb and 5.00 mol H2SO4 with plenty of PbO2. Using Pb + PbO2 + 2H2SO4 → 2PbSO4 + 2H2O, find the limiting reagent and the mass of PbSO4 formed.
Check your answer
Answer: H2SO4 limits (5.00 ÷ 2 = 2.50 vs 3.00); 1516.3 g PbSO42 H2SO4 : 2 PbSO4, so 5.00 mol PbSO4 × 303.256. - A recycler recovers 0.640 kg of lead from 1.00 kg of PbSO4. What is the percent yield (theoretical lead is 0.683 kg)?
Check your answer
Answer: 93.7%0.640 ÷ 0.6833 × 100.
Molar Masses and Worked Mole Bridges for Missouri Lead Chemistry
NIST standard atomic weights and Avogadro constant; EPA AP-42 Section 12.6 and Missouri DNR Buick Resource Recycling Facility page for the process descriptions; all retrieved 2026-11-15; SLS worked bridges · SLS original (worked examples), with NIST reference values and process facts from U.S. government (public domain) and Missouri DNR pages, cited
Why this reading. The mole bridge needs accurate molar masses and a way to check your answer. This reading gives the NIST atomic weights the course uses, the molar masses of every species in the lead process, a line-by-line mass check of the battery equation, and the finished bridge results so you can verify your own work.
Atomic weights (NIST conventional values)
| Element | Symbol | Atomic weight used (g/mol) |
|---|---|---|
| Hydrogen | H | 1.008 |
| Carbon | C | 12.011 |
| Nitrogen | N | 14.007 |
| Oxygen | O | 15.999 |
| Sodium | Na | 22.990 |
| Sulfur | S | 32.060 |
| Lead | Pb | 207.2 |
One mole is exactly 6.02214076 × 1023 particles (NIST, CODATA 2022). Where NIST gives an interval for an element (for example H, C, O, S) the table uses the conventional value inside it.
Molar masses used in this lesson
| Species | Sum | Molar mass (g/mol) |
|---|---|---|
| H2O | 2(1.008) + 15.999 | 18.015 |
| SO2 | 32.06 + 2(15.999) | 64.058 |
| O2 | 2(15.999) | 31.998 |
| PbS | 207.2 + 32.06 | 239.26 |
| PbO | 207.2 + 15.999 | 223.199 |
| PbO2 | 207.2 + 2(15.999) | 239.198 |
| H2SO4 | 2(1.008) + 32.06 + 4(15.999) | 98.072 |
| PbSO4 | 207.2 + 32.06 + 4(15.999) | 303.256 |
| NaOH | 22.990 + 15.999 + 1.008 | 39.997 |
| Na2SO4 | 2(22.990) + 32.06 + 4(15.999) | 142.036 |
Mass check: the battery equation, one mole-equation
Pb + PbO2 + 2H2SO4 → 2PbSO4 + 2H2O
| Species | Coefficient | Molar mass (g/mol) | Reactant mass (g) | Product mass (g) |
|---|---|---|---|---|
| Pb | 1 | 207.200 | 207.200 | |
| PbO2 | 1 | 239.198 | 239.198 | |
| H2SO4 | 2 | 98.072 | 196.144 | |
| Total reactants | 642.542 | |||
| PbSO4 | 2 | 303.256 | 606.512 | |
| H2O | 2 | 18.015 | 36.030 | |
| Total products | 642.542 |
Finished bridges (for checking your work)
Process descriptions: EPA describes sintering as oxidizing lead sulfide to the oxide with SO2 released and the strong gas possibly sent to a sulfuric acid plant; Missouri DNR says the recovered sulfuric acid is used to make sodium sulfate crystals without naming the route, so the neutralization row is illustrative.
| Problem | Start | Mole ratio | Result |
|---|---|---|---|
| Roasting 1,000 kg pure PbS | 4,179.6 mol PbS | 1 PbS : 1 Pb | 866.0 kg Pb (86.60% of the PbS) |
| Same roast: SO2 | 4,179.6 mol PbS | 2 PbS : 2 SO2 | 267.7 kg SO2 |
| Same roast: O2 consumed | 4,179.6 mol PbS | 2 PbS : 3 O2 | 200.6 kg O2 |
| Same roast: PbO | 4,179.6 mol PbS | 2 PbS : 2 PbO | 932.9 kg PbO |
| If all S becomes H2SO4 | 4,179.6 mol SO2 | 1 SO2 : 1 H2SO4 | 409.9 kg H2SO4 |
| Battery plate, 1.00 kg Pb reacting | 4.826 mol Pb | 1 Pb : 2 H2SO4 : 2 PbSO4 | 946.6 g H2SO4 used; 2,927.2 g PbSO4 and 173.9 g H2O formed |
| Recycling 1.00 kg PbSO4 | 3.298 mol PbSO4 | 1 PbSO4 : 1 Pb | 0.683 kg Pb |
| Neutralizing 1.00 kg H2SO4 | 10.197 mol H2SO4 | 1 H2SO4 : 2 NaOH : 1 Na2SO4 | 0.816 kg NaOH needed; 1.448 kg Na2SO4 and 0.367 kg H2O formed |
Pure PbS is assumed throughout. Real concentrates also contain other minerals, and EPA describes the blast-furnace lead as only roughly 85 percent pure, so real masses are smaller than these theoretical ones.
Sources: NIST Physical Measurement Laboratory, Atomic Weights and Isotopic Compositions (standard atomic weights; conventional values used where NIST gives an interval) (retrieved 2026-11-15) (physics.nist.gov); NIST, CODATA 2022 value of the Avogadro constant (retrieved 2026-11-15) (physics.nist.gov); U.S. EPA, AP-42 Section 12.6, Primary Lead Smelting (January 1995) (retrieved 2026-11-15) (epa.gov); Missouri Department of Natural Resources, Buick Resource Recycling Facility Smelter (Boss, Iron County), facility page (retrieved 2026-11-15) (dnr.mo.gov)