THE VR SCHOOL
  • Schools & Districts
    • License the academy
    • Free program for your students
    • Request a demo
  • Catalog
    • AI & Data
    • Cybersecurity & Web
    • Programming
    • Health Science
    • All Guilds
    • All courses
  • Families
  • Accreditation
  • Log In
  • Request a demo
  • Home
  • Courses

RLP Chemistry A — Atoms, Bonding, Reactions, Gases and Solutions

Curriculum

  • 4 Sections
  • 20 Lessons
  • 10 Weeks
Expand all sectionsCollapse all sections
  • Unit 1: Atoms, Electrons and the Periodic Table
    5
    • 1.1
      Lead in Missouri: What Is an Atom of an Element?
      50 mins
    • 1.2
      Metals, Nonmetals and Reactivity Patterns
      100 mins
    • 1.3
      Arguing from Periodic Trends
      50 mins
    • 1.4
      Modeling Electrons: Configurations and Line Spectra
      50 mins
    • 1.5
      Performance Task: Element Brief on Lead, Missouri’s Useful and Hazardous Metal
      150 mins
  • Unit 2: Bonding, Structure and the Properties of Materials
    5
    • 2.1
      Missouri Limestone: One Rock, Three Kinds of Bonding
      50 mins
    • 2.2
      Shape, Polarity and Forces: A Kitchen Investigation
      100 mins
    • 2.3
      Why Ethanol Boils Higher Than Its Twin: Arguing from NIST Data
      50 mins
    • 2.4
      Structure Sets the Job: Metals, Ceramics, Network Solids and Polymers
      50 mins
    • 2.5
      Performance Task: A Materials-Selection Brief for a Missouri Application
      150 mins
  • Unit 3: Reactions, the Mole and Stoichiometry
    5
    • 3.1
      Missouri Lead: Writing, Naming and Balancing Reactions
      50 mins
    • 3.2
      Sealed Bag, Open Cup: Conservation of Mass and the Mole
      100 mins
    • 3.3
      Which Reactant Runs Out? Limiting Reagent and Percent Yield
      50 mins
    • 3.4
      The Mole Bridge: Mass-to-Mass Stoichiometry for Missouri Lead
      50 mins
    • 3.5
      Performance Task: Ammonia for Missouri Corn, a Stoichiometry Brief
      150 mins
  • Unit 4: Gases, Solutions and the Energy of Reactions
    5
    • 4.1
      The Tire Light on a Missouri Morning: Gas Particles and Gas Laws
      50 mins
    • 4.2
      A Syringe in an Ice Bath: Finding Absolute Zero from Gas Volumes
      100 mins
    • 4.3
      Lead in the Tap: Concentration, Dilution and Parts per Billion
      50 mins
    • 4.4
      Bond Energies and Fuels: Why Ethanol Releases Less Energy than Gasoline
      100 mins
    • 4.5
      Performance Task — A Quantitative Brief: Lead in Water or Ethanol Fuel Energy
      150 mins

Metals, Nonmetals and Reactivity Patterns

Unit 1  ·  Investigation Lab  ·  Lesson 2 of 20

Metals, Nonmetals and Reactivity Patterns

9-12.PS1.A.1RLP-CHEMA
Metal strips in cups of vinegar with bubbles forming at different rates.
By the end of this lesson I can…

test household samples of elements for conductivity and reactivity with vinegar, add recorded data for magnesium and sulfur, and relate the patterns I observe to each element’s position on the periodic table.

Instruction

Why a lab here. In Lesson 1.1 you found that lead keeps its identity because its atoms keep 82 protons. The periodic table is a model that arranges all elements by atomic number, and a model is only useful if it predicts what you can observe. Today you test that model with household samples. You measure two properties: whether a sample conducts electricity, and how fast a metal produces bubbles in vinegar.

Sorting elements by properties. Metals sit on the left and middle of the table. They are shiny, bend rather than shatter, and conduct electricity. Nonmetals sit on the upper right; as solids they are dull and brittle and usually do not conduct. A staircase of metalloids lies between them. Lead, galena’s metal, is a soft, dense, malleable, corrosion-resistant metal in Group 14. The model has exceptions you can test: graphite is a nonmetal that conducts.

Outer electrons and groups. For the main-group elements, the last digit of the group number equals the number of outer (valence) electrons: sodium (Group 1) has 1, magnesium (Group 2) has 2, aluminum (Group 13) has 3, carbon and lead (Group 14) have 4, sulfur (Group 16) has 6. Metals tend to lose outer electrons and nonmetals tend to gain or share them. A bubbling metal in vinegar is losing electrons to hydrogen ions in the acid, forming hydrogen gas, so faster bubbling means the metal gives up electrons more readily.

Designing a fair test. The independent variable is the metal. The dependent variable is the bubbling you score. Everything else is a controlled variable: 10 mL of the same vinegar, 1 cm pieces, same temperature, same cup. Score at three set times so you do not just score what looks interesting. Run at least three trials, because one trial cannot show the spread in your results.

Worked example: from scores to a ranking. Score each trial at 30 seconds, 2 minutes and 5 minutes on the 0 to 3 scale and add the three scores. This is the activity index, from 0 to 9. In this lesson’s reading, magnesium’s three trials give indexes of 8, 8.5 and 8, so its mean is (8 + 8.5 + 8) ÷ 3 = 8.17. Zinc’s mean is 5.00. Relative reactivity of zinc = 5.00 ÷ 8.17 × 100 = 61.2% of magnesium. Copper’s index is 0 in every trial, so it did not react at all in vinegar.

When the model is not enough. The model predicts magnesium reacts faster than copper, and the data agree. But aluminum has the lowest first ionization energy of the five metals in the reading (5.986 eV) and a low early score. A layer of aluminum oxide covers the foil, so the metal underneath cannot touch the vinegar until the layer is attacked. A good scientist reports this exception and explains it instead of hiding it. Ionization energy alone also cannot rank all transition metals in water, so treat it as one line of evidence.

Doing the lab responsibly. The wet lab is optional and needs an adult at home, safety glasses and household materials only. If you cannot run it, the recorded data in this lesson’s reading give you everything for the analysis. Do not test lead objects: lead dust is a hazard, as Missouri agencies document.

📖 Read for this lesson

The reading opens over the lesson; close it to come back to exactly where you were. The checks below draw on it.

  • Metals in Vinegar: A Recorded Three-Trial Data Set with NIST Ionization EnergiesSLS original recorded data set for the Lesson 1.2 procedure (illustrative, n = 3 trials); ionization energies from the NIST Atomic Spectra Database, retrieved 2026-11-15 · about 4 min

    A three-trial recorded run of the vinegar procedure for magnesium, zinc, iron, aluminum and copper, a conductivity panel with a sulfur row, and NIST ionization energies, so you can complete the lab analysis even if you cannot run the wet lab.

Vocabulary in context

  • metal — An element that is lustrous, conducts heat and electricity, and tends to lose electrons in reactions.
  • nonmetal — An element that is usually dull and brittle as a solid, conducts poorly, and tends to gain or share electrons.
  • valence electrons — The electrons in an atom’s outermost shell; for a main-group element their number equals the last digit of its group number.
  • reactivity — How readily a substance takes part in chemical reactions.
  • controlled variable — A condition kept the same in every trial so that it cannot explain the results.
  • activity index — In this lab, the sum of the three bubbling scores (0–3 each) for one trial, from 0 to 9.

Lab: Conductivity and Reactivity of Metals and Nonmetals

Question. Do the conductivity and reactivity of element samples follow the patterns predicted by their positions on the periodic table?

Materials

  • Samples: bare copper wire, aluminum foil, a sanded steel nail, a galvanized (zinc-coated) nail or washer that you do not sand, a graphite pencil lead (a mechanical-pencil refill), and a plastic straw. Magnesium and sulfur are not household materials, so their rows come from the recorded data set in this lesson’s reading. Do not use lead objects.
  • Conductivity tester: 2 AA batteries in a holder (or taped end to end), an LED or small flashlight bulb, and three wires with alligator clips or bare ends. No tester parts? Do the conductivity step in the PhET Circuit Construction Kit: DC, which includes a pencil lead and household objects.
  • White vinegar (5% acetic acid), 10 mL (2 teaspoons) per test
  • Four clear plastic cups or small glasses, measuring spoons, sandpaper or a nail file, a ruler
  • Phone timer and camera, safety glasses
Safety.
  • Wear safety glasses for the whole lab: vinegar stings if splashed in the eyes.
  • Have an adult at home while you work, and work in a ventilated room.
  • Use only the low-voltage battery tester; never connect anything to a wall outlet.
  • Vinegar is the only acid in this lab; never mix vinegar or any other household product with bleach or ammonia.
  • Do not taste or smell samples, and do not use lead objects such as fishing weights. Wash hands after the lab, pour spent vinegar down the sink with plenty of water, and wrap used metal pieces in a paper towel for the trash.

Procedure

  1. Record the appearance of each sample (luster, color) and whether it bends or snaps.
  2. Touch both tester leads to each solid sample (or test the same materials in the PhET Circuit Construction Kit: DC). Record whether the LED lights.
  3. Pour 10 mL (2 teaspoons) of vinegar into each of four labeled cups. Add one 1 cm piece of metal (Zn, Fe, Al, Cu) to each at the same moment, then start the timer and a phone video.
  4. Score bubbling at 30 seconds, 2 minutes and 5 minutes on the 0-3 scale (0 none, 1 a few, 2 steady, 3 vigorous). Add the three scores to get each metal’s activity index. Replay the video later and score again without looking at your first scores; where they differ by one point, use the average.
  5. Repeat with fresh vinegar and fresh pieces for two more trials, then compute the mean activity index for each metal. Copy the magnesium and sulfur rows from the recorded data set in the reading.
  6. Locate each element on the periodic table and record its group, period and number of valence electrons next to your data, and add the NIST first ionization energy from the reading.

Data

SampleGroup, periodValence electronsLuster / bends?Conducts?Index trial 1 / 2 / 3Mean index
Mg (recorded data)
Zn
Fe
Al
Cu
Graphite, straw; S (recorded data)n/an/a

Analysis

  1. Claim: rank Mg, Zn, Fe, Al and Cu from most to least reactive in vinegar. Evidence: cite your mean activity indexes and the relative reactivity of each metal compared with magnesium. Reasoning: explain the ranking using how easily each metal gives up outer electrons, and say which result does not fit the pattern from ionization energy alone.
  2. Which sample broke the metal / nonmetal conductivity pattern? Explain why one exception does not destroy the periodic-table model.
  3. Name two sources of error (for example, an oxide coating on the aluminum or nail, or different piece sizes) and how each could change your ranking.
  4. Lead is a metal in Group 14, period 6. Using only your lab results and the periodic table, state what you can and cannot predict about lead, and why this lab does not test it.

If you cannot do this lab in person: Use the recorded data set in this lesson’s reading (three trials for each of Mg, Zn, Fe, Al and Cu, plus the conductivity and sulfur panel) for every table and every analysis question, and do the conductivity part with the PhET Circuit Construction Kit: DC (which includes a pencil lead and household objects).

Formative check

Work through these before moving on. They are not graded — they tell you whether the standard below has landed yet.

Make a prediction

Before you see any data, rank magnesium, zinc and copper by how fast you expect them to bubble in vinegar.

Mg > Zn > Cu: metals that give up outer electrons more easily react faster, and copper does not react with vinegar at all. Compare this prediction with your data and with the table in this lesson’s reading.
+50 XP

In the vinegar test, which is the independent variable?

The metal is what you deliberately change; bubbling is what you measure; the volume of vinegar and the temperature are controlled.
+50 XP

Use the data table in this lesson’s reading. Which metal has the second-highest mean activity index, and what is that index?

Magnesium is first at 8.17; zinc is second at 5.00 (trial indexes 5, 5.5 and 4.5).
Myth or Fact?

Because graphite conducts electricity, carbon must be a metal.

Carbon is a nonmetal. Graphite’s layered structure lets electrons move within layers; diamond, another form of carbon, does not conduct. Classification rests on many properties together.

Write your claim-evidence-reasoning paragraph ranking the five metals (your own and the magnesium data from the reading). Include at least two numbers from your data table, explain the aluminum result, and name one source of error.

0 words
Quick self-check

How confident are you that you can plan a fair test of element properties and connect the results to periodic-table position?

Not yetVery confident

Practice

Work these on paper or in your notebook, then open Check your answer. Aim for all of Fluency and Application; try at least one Challenge.

Printable version: this unit’s practice workbook (PDF)

Fluency

Build speed and accuracy with the core skill.

  1. How many valence electrons do Na (Group 1), Mg (Group 2), Al (Group 13), C (Group 14) and Cl (Group 17) have?
    Check your answer
    Answer: 1, 2, 3, 4 and 7
    For a main-group element the number of valence electrons is the last digit of the group number.
  2. A trial scores 3 at 30 s, 3 at 2 min and 2 at 5 min. What is the activity index?
    Check your answer
    Answer: 8
    3 + 3 + 2 = 8.
  3. Three trials of one metal have activity indexes 5, 5.5 and 4.5. Find the mean.
    Check your answer
    Answer: 5.00
    (5 + 5.5 + 4.5) ÷ 3 = 5.00.
  4. Classify each as metal or nonmetal from its position and properties: sulfur, copper, magnesium, graphite.
    Check your answer
    Answer: Sulfur: nonmetal; copper: metal; magnesium: metal; graphite (carbon): nonmetal that conducts
    Use the periodic table position (upper right = nonmetal) and properties together; graphite is the conductivity exception.
  5. In the vinegar test, name the independent variable, the dependent variable and two controlled variables.
    Check your answer
    Answer: Independent: the metal; dependent: the bubbling score (activity index); controlled: for example vinegar volume and temperature
    The independent variable is what you change; the dependent variable is what you measure; controlled variables are kept the same.
  6. Does the periodic table predict that sulfur conducts electricity? What did the recorded data show?
    Check your answer
    Answer: No: sulfur is a nonmetal and the recorded data show the LED stayed off
    Nonmetals usually do not conduct; the reading’s conductivity panel records No for sulfur.

Application

Use the skill in context. Show your reasoning.

  1. Using the reading’s means, compute zinc’s reactivity relative to magnesium: zinc’s mean index 5.00, magnesium’s 8.17. Give the answer as a percent to one decimal place.
    Check your answer
    Answer: 61.2%
    5.00 ÷ 8.17 × 100 = 61.2%.
  2. Rank the five metals in the reading from highest to lowest mean activity index.
    Check your answer
    Answer: Magnesium (8.17), Zinc (5.00), Iron (2.00), Aluminum (1.50), Copper (0.00)
    Compute each metal’s mean of three activity indexes and sort.
  3. Aluminum has a lower first ionization energy than magnesium, yet it scores lower in vinegar. Give one reason, and say whether this disproves the periodic-table model.
    Check your answer
    Answer: A thin aluminum oxide layer blocks the vinegar at first; it is a coating effect and does not disprove the model, because ionization energy is one line of evidence.
    Report the exception and explain it with a mechanism; one explained exception does not overturn a trend.

Challenge

Stretch problems. Expect to think before you write.

  1. Rank Al, Mg, Cu, Fe and Zn by first ionization energy (low to high; NIST: Al 5.986 eV, Mg 7.646 eV, Cu 7.726 eV, Fe 7.902 eV, Zn 9.394 eV), then compare with the reactivity ranking. Which metal’s reactivity rank differs most from its ionization-energy rank, and by how many places?
    Check your answer
    Answer: Ionization-energy order (low to high): Al, Mg, Cu, Fe, Zn. Reactivity order: Mg, Zn, Fe, Al, Cu. Aluminum and zinc tie for the biggest difference, 3 places each (aluminum is 1st by ionization energy but 4th in reactivity; zinc is 5th but 2nd).
    Ionization-energy rank (1 = lowest): Al 1, Mg 2, Cu 3, Fe 4, Zn 5. Reactivity rank (1 = most reactive): Mg 1, Zn 2, Fe 3, Al 4, Cu 5. Subtract the two ranks for each metal.
  2. A student runs only one trial of each metal and reports a ranking. Explain two ways repeating the test three times improves the claim, and compute how the mean of 5, 5.5 and 4.5 compares with the single value 5.5.
    Check your answer
    Answer: Repeats show the spread and reduce the effect of one unusual trial; mean = 5.00, which is 0.50 lower than 5.5
    (5 + 5.5 + 4.5) ÷ 3 = 5.00; 5.5 − 5.00 = 0.50.

Review

Keep earlier skills sharp.

  1. How many protons, neutrons and electrons are in a neutral zinc-64 atom?
    Check your answer
    Answer: 30 protons, 34 neutrons, 30 electrons
    Z = 30; neutrons = 64 − 30 = 34.
  2. A soil sample has 400 ppm lead. How many milligrams of lead are in 250 g of this soil?
    Check your answer
    Answer: 100 mg
    400 mg/kg × 0.250 kg = 100 mg.

Missouri Learning Standards — Science addressed: 9-12.PS1.A.1, SEP.3, CCC.1, RST.9-10.3

Instructional focus: Hands-on investigation of element properties and periodic patterns

Reading

Metals in Vinegar: A Recorded Three-Trial Data Set with NIST Ionization Energies

SLS original recorded data set for the Lesson 1.2 procedure (illustrative, n = 3 trials); ionization energies from the NIST Atomic Spectra Database, retrieved 2026-11-15 · SLS original (constructed teaching data, labeled illustrative), with public-domain NIST reference values

Why this reading. Lesson 1.2’s alternative route says “use the recorded data table.” This is that table: three recorded trials of the vinegar procedure with magnesium (which is not a household material), plus the other four metals and a conductivity panel with a sulfur row. If you ran the wet lab, copy the magnesium and sulfur rows into your own table. If you did not, use this reading for the whole analysis. The trial data are SLS original and illustrative: constructed to match what this procedure typically gives, not a measurement by any agency. The ionization energies in the last column are NIST values.

The recorded trials

Each trial placed a 1 cm piece of metal in 10 mL of white vinegar (5% acetic acid) at room temperature. Bubbling was scored from 0 to 3 (0 none, 1 a few, 2 steady, 3 vigorous) at 30 seconds, 2 minutes and 5 minutes. A half point means two scorings differed by one point and were averaged. The activity index for a trial is the sum of its three scores, so it ranges from 0 to 9.

MetalTrial30 s2 min5 minActivity index (0–9)
Magnesium (Mg)13328
Magnesium (Mg)2332.58.5
Magnesium (Mg)33328
Zinc (Zn)11225
Zinc (Zn)2122.55.5
Zinc (Zn)311.524.5
Iron (Fe)10112
Iron (Fe)200.511.5
Iron (Fe)3011.52.5
Aluminum (Al)100.511.5
Aluminum (Al)20011
Aluminum (Al)300.51.52
Copper (Cu)10000
Copper (Cu)20000
Copper (Cu)30000

Means, relative reactivity and periodic position

Mean index = (index of trial 1 + trial 2 + trial 3) ÷ 3. Relative reactivity = mean index ÷ magnesium’s mean index × 100. Valence electrons are the outer-shell electrons the element’s group number indicates (for the main groups, the last digit of the group number; zinc, iron and copper are transition metals and are listed with their 4s electrons).

MetalMean activity indexRelative to MgGroupPeriodValence electronsFirst ionization energy (eV, NIST)
Magnesium (Mg)8.17100.0%2327.646
Zinc (Zn)5.0061.2%12429.394
Iron (Fe)2.0024.5%8427.902
Aluminum (Al)1.5018.4%13335.986
Copper (Cu)0.000.0%11417.726

Reading the table: magnesium, a Group 2 metal with a low ionization energy, is the most reactive. Aluminum’s ionization energy is the lowest of the five, yet it scored near the bottom early in each trial: a thin, tough layer of aluminum oxide on the foil keeps the vinegar away from the metal until the layer is attacked, which is why its 5-minute scores rise. That is a coating effect, not a failure of the periodic table. Zinc has the highest ionization energy of the five and still outranks iron; across the transition metals, ionization energy alone does not set reactivity in water solutions, which Chemistry B returns to with energy and electrode data.

Conductivity and appearance panel

SampleClassLights the LED?Group, period
Magnesium (Mg)metalYes (LED bright)2, 3
Zinc (Zn), galvanized nailmetalYes (LED bright)12, 4
Iron (Fe), sanded steel nailmetalYes (LED bright)8, 4
Aluminum (Al), foilmetalYes (LED bright)13, 3
Copper (Cu), wiremetalYes (LED brightest)11, 4
Carbon (C), graphite pencil leadnonmetalYes (LED dim)14, 2
Sulfur (S), powdernonmetalNo16, 3
Plastic straw (carbon compounds)not an elementNo—

The sulfur row is recorded data for the lesson; sulfur is not a household material. Graphite is the exception that matters: a nonmetal that conducts, because of its layered structure.

Do not test lead at home

Lead (Group 14, period 6) is a metal, but lead objects such as fishing weights or old solder can shed lead dust, and Lesson 1.1’s reading documents why lead in soil and dust is a concern. This lab leaves lead out on purpose. Its first ionization energy, 7.417 eV (NIST), is placed beside the five metals above for Lesson 1.3.

Reference

First ionization energies from the NIST Atomic Spectra Database ionization-energies form (retrieved 2026-11-15). Lead’s group and period are standard periodic-table facts; the properties of lead named in this reading follow Missouri DNR PUB0659.

Sources: NIST Atomic Spectra Database, Ionization Energies Form (physics.nist.gov); Missouri Department of Natural Resources, Missouri Geological Survey, “Lead,” PUB0659 (Oct. 8, 2020) (dnr.mo.gov)

Up NextComplete & Continue →

Leave a Reply Cancel reply

Lead in Missouri: What Is an Atom of an Element?
Prev
Arguing from Periodic Trends
Next

© 2026 The VR School | Career content by Wiley | Powered by Sejal Learning Systems.

Join free · Accreditation · Privacy Policy · Terms of Service

Modal title

Main Content