show what I have learned about transformations, congruence and similarity, the Pythagorean Theorem and volume.
Phase 5: Prove It
Do Now. Take a slow breath. You have been designing a park for weeks. Read the passage first. Some questions use it.
How confident are you that you can I am ready to show my thinking and check my answers.
The reading opens over the lesson; close it to come back to exactly where you were.
Formulas (given): cylinder V = πr2h; cone V = (1/3)πr2h; sphere V = (4/3)πr3. Use π ≈ 3.14 when a decimal is asked for.
This unit check is your chance to show your thinking. Part A has short questions. Part B asks you to solve and explain. Sketch a diagram for every geometry question, and check with a second method when you can.
For written answers, show three things: the formula or rule, the steps with numbers, and the answer with units and a check.
Worked example 1: Bea shows her work. Question: a path crosses a 6 m by 8 m lawn. Bea writes: “c2 = 62 + 82 = 100, c = 10 m. Check: 10 is longer than 8 but shorter than 6 + 8.”
Worked example 2: Jonah describes a sequence. Question: show two triangles are congruent. Jonah writes: “Reflect over the y-axis, then translate 2 units down. Each step is a rigid motion, so lengths and angles stay the same.” He names each step in order.
Be kind to yourself. If you are stuck, sketch, try a simpler number, then come back.
Part A. Answer on your own. You may use scratch paper and the formula box, but not a calculator.
Finish Part A (the last four questions). Then do Part B: show the formula or rule, your steps, the answer with units and a check.
The distance from (−3, −2) to (5, 4) is units (write a whole number).
Two inches of rain fall into the gauge's 8-inch funnel. About how much water is collected? (Use π ≈ 3.14.)
What is the volume of a cone with radius 3 m and height 10 m?
A ball is 10 cm across. What is its volume?
1. The park logo has vertices P(2, 1), Q(5, 1) and R(2, 5). (a) Rotate it 90° counterclockwise about the origin and give the new coordinates. (b) Dilate the original by scale factor 2. (c) Which image is congruent to the original and which is similar? Explain.
2. A sample rectangular park is 60 m by 80 m. How much shorter is the diagonal path than walking along two edges? Show your work in tens of meters.
3. A court crew measures sides of 9 ft and 12 ft and a diagonal of 15 ft. Is the corner square? Then explain what they should do if the diagonal measured 14 ft.
4. On the park map each unit is 10 m. The gate is at (−4, 1) and the fountain is at (2, 9). How far apart are they in meters? Then estimate the distance from the gate to a bench at (0, 6).
5. Use the reading. The gauge's measuring tube has one tenth the area of the 8-inch funnel and is 20 in tall. Find the tube's volume in terms of π, and explain why it holds exactly 2 inches of rain.
Look back through your answers. Add a check wherever you can.
Which answer best shows your growth as a park designer? Why?
How confident are you that you can I can use transformations, the Pythagorean Theorem and volume to plan a public space.
Pacing: reading 6 minutes, directions and examples 4, Part A 14, Part B 14, closure 2. Allow extended time as needed. The formula box is given, as on the PSSA; Part A is non-calculator.
Evidence map: Part A: rigid motions CC.2.3.8.A.2:1a; dilation coordinates CC.2.3.8.A.2:3a; congruence sequence CC.2.3.8.A.2:2a; similarity sequence CC.2.3.8.A.2:4a; right triangle CC.2.3.8.A.3:1a; ladder and box CC.2.3.8.A.3:2a; distance CC.2.3.8.A.3:3a; rain, cone and ball CC.2.3.8.A.1:1a. Part B: Q1 CC.2.3.8.A.2:1a, 2a, 3a and 4a; Q2 CC.2.3.8.A.3:2a; Q3 CC.2.3.8.A.3:1a; Q4 CC.2.3.8.A.3:3a; Q5 CC.2.3.8.A.1:1a.
Supports: read aloud, a squares table to 12² and a cubes table to 5³ for students whose plans allow them.
Answer key, Part A: every length and angle; (2, −1); reflect over the x-axis, then translate 2 right; dilate by 2, then rotate 180°; 12, 16, 20; 8; 11 in; 10; 100.48 in³; 30π; (500/3)π.
Answer guide, Part B (4 points each): 4 = correct answer, clear steps, units and a check; 3 = correct with a small gap; 2 = correct method with an error; 1 = a start. Q1: (a) (−1, 2), (−1, 5), (−5, 2); (b) (4, 2), (10, 2), (4, 10); (c) the rotation is congruent (rigid motion), the dilation is similar (lengths doubled, angles kept). Q2: 6² + 8² = 100, diagonal 100 m; edges 140 m; 40 m shorter. Q3: 81 + 144 = 225 = 15², square; with 14 ft the diagonal is too short (196 < 225), so the corner is less than 90° and should be opened until the diagonal is 15 ft. Q4: changes 6 and 8, 10 units = 100 m; to the bench, changes 4 and 5, 16 + 25 = 41, √41 ≈ 6.4 units (6.4² = 40.96), about 64 m. Q5: funnel area 16π in², tube area 1.6π in², tube volume 1.6π × 20 = 32π in³; 2 in of rain over the funnel is 16π × 2 = 32π, the same.
National Weather Service, Northern Indiana office: The 8-inch Standard Rain Gauge · U.S. government work, public domain
The National Weather Service’s 8-inch standard rain gauge is a set of cylinders that fit together.
On top is a collector funnel 8 inches across with a sharp rim. It catches rain and sends it into a measuring tube 20 inches tall. The funnel’s opening has 10 times the area of the tube, so the water in the tube is 10 times deeper than the rain that fell. One inch of rain fills the tube to 10 inches. The tube holds 2.0 inches of rain in all.
The tube sits inside a larger overflow can. When more than 2.00 inches of rain falls, the extra spills into the can, which can hold up to 20 inches. Observers pour that water into the empty tube to measure it.
A measuring stick about 24 inches long is marked every hundredth of an inch. The observer reads the wet mark and records it to the nearest hundredth, such as 1.34 inches.
The page also says the gauge should be set up so that its bottom is about 10 to 15 inches above the ground, and checked over the years so that trees, brush or new buildings do not block the rain.
Source: National Weather Service, Northern Indiana office: The 8-inch Standard Rain Gauge (weather.gov)