translate figures on a coordinate grid with tracing paper, describe a translation in words and with a rule, and show that lengths and direction stay the same.
Phase 2: Investigate
Do Now. Trace a triangle from the grid onto tracing paper. Slide the tracing 3 units to the right without turning it. Look at the sides of the traced triangle.
After the slide, what happens to the side lengths of the triangle?
The reading opens over the lesson; close it to come back to exactly where you were.
What a translation does. A translation slides every point of a figure the same distance in the same direction. The figure does not turn or flip, so it keeps facing the same way. Side lengths and angles stay the same.
Describing a translation. In words: “3 units right and 2 units down.” As a coordinate rule: (x, y) → (x + 3, y − 2). Right adds to x, left subtracts from x, up adds to y and down subtracts from y.
Worked example 1: a lighthouse in pushes. Gabe reads that push jacks moved the lighthouse 5 feet at a time along a 2,900-foot path. Step 1: number of pushes = 2,900 ÷ 5. Step 2: 2,900 ÷ 5 = 580. Step 3: check: 580 × 5 = 2,900. Every part of the tower moved in each push, top and bottom alike. That is what makes it a translation.
Worked example 2: a triangle on the grid. Sofia translates triangle PQR, with P(−2, 1), Q(1, 1) and R(−2, 4), 4 units right and 3 units down. Step 1: the rule is (x, y) → (x + 4, y − 3). Step 2: P′ = (−2 + 4, 1 − 3) = (2, −2). Step 3: Q′ = (1 + 4, 1 − 3) = (5, −2). Step 4: R′ = (−2 + 4, 4 − 3) = (2, 1). Step 5: check: PQ = 1 − (−2) = 3 and P′Q′ = 5 − 2 = 3. PR = 4 − 1 = 3 and P′R′ = 1 − (−2) = 3.
Tracing-paper check. Trace the original, mark one corner, slide the paper along the grid lines the right number of units, and press a pencil point through each corner. The dots should land on the image you calculated.
Finding a rule from a picture. If you know a point and its image, subtract: the change in x tells right or left, and the change in y tells up or down. Every point of the figure must give the same change.
Use a coordinate grid and tracing paper. Check each answer by tracing.
Show your work on grid paper.
Translate triangle ABC with A(1, 2), B(4, 2) and C(4, 6) 3 units left and 5 units down. List the image points and check that BC and B′C′ have the same length.
A translation moves M(2, 5) to M′(−1, 9). Which rule is it?
A translation moves (4, 1) to (4, −6). The figure moved units down. (Write the number only.)
A translation slides without turning, so sizes and direction stay the same. Next we flip figures over a line.
Exit ticket: write the rule for a translation 6 units left and 1 unit up, then use it on the point (2, −3).
Pacing: Do Now with tracing 6 min, reading 7, mini lesson 10, guided practice 12, exit ticket 5.
Materials: coordinate grids (−10 to 10), tracing paper or patty paper, rulers.
Accuracy: 1870, 1,500 ft, 120 ft by 1970, 2,900 ft southwest, 4,830 tons, 5 ft per push, sixty sensors, June 17 to July 9, 1999, about 1,600 ft today and duty resumed November 13, 1999 are from the NPS page. The page calls it the tallest brick lighthouse in the United States. The predict reveal explains only what the page supports (direction southwest, changing shoreline); do not invent a straight-line distance to the shore.
Likely misconceptions: mixing up which coordinate changes for left/right; subtracting for “up”; moving only one vertex. Have students say “x is across, y is up” before writing a rule.
Supports: arrow cards (right +x, left −x, up +y, down −y). Stretch: two translations in a row, (x + 2, y) then (x, y − 5), equal one translation; write it. ((x + 2, y − 5).)
Answer guide: A′(−2, −3), B′(1, −3), C′(1, 1); BC = 6 − 2 = 4 and B′C′ = 1 − (−3) = 4. Exit ticket: (x − 6, y + 1); (2, −3) → (−4, −2). The keepers’ quarters answer: all buildings moved together, so distances between them stayed the same, just as all points of a figure move together.
National Park Service, Cape Hatteras National Seashore: Moving the Cape Hatteras Lighthouse · U.S. government work, public domain
The Cape Hatteras Lighthouse in North Carolina is the tallest brick lighthouse in the United States. When it was finished in 1870, it stood a safe 1,500 feet from the ocean. Storms slowly washed away the shore, a natural process called erosion. By 1970 the ocean was only 120 feet away.
After years of study and debate, the National Park Service decided to move the whole light station. In 1999 the lighthouse and the other historic structures of the station were moved 2,900 feet to the southwest.
The tower weighs 4,830 tons. Workers lifted it with hydraulic jacks and set it on steel track beams with rollers. Push jacks moved it forward 5 feet at a time. Three zones of jacks kept the tower lined up, and sixty sensors checked for tilt and vibration. The move began on June 17, 1999, and the lighthouse was placed on its new foundation on July 9.
At the new site, every building was set in the same position compared with the others as before. Today the lighthouse stands about 1,600 feet from the ocean, and it has been shining again since November 13, 1999.
Source: National Park Service, Cape Hatteras National Seashore: Moving the Cape Hatteras Lighthouse (nps.gov)