measure figures before and after translations, reflections and rotations to show that lengths, angles and parallel lines stay the same, and tell what can change.
Phase 2: Investigate
Do Now. Draw a rectangle on grid paper and trace it. Slide, flip or turn the tracing however you like. Measure the sides and corners of the tracing in its new spot.
After any slide, flip or turn, what will be true about the tracing?
The reading opens over the lesson; close it to come back to exactly where you were.
The big claim. Every rigid motion (translation, reflection or rotation) keeps these things the same: segment lengths, angle measures, and parallel lines staying parallel. Lines stay lines. So the image is always congruent to the original.
What can change. The position on the grid can change. A rotation changes the direction the figure faces. A reflection reverses the orientation. A translation changes only the position.
Worked example 1: test a half turn. Hana rotates rectangle WXYZ, with W(1, 1), X(5, 1), Y(5, 3) and Z(1, 3), 180° about the origin using tracing paper. The image is W′(−1, −1), X′(−5, −1), Y′(−5, −3), Z′(−1, −3). Step 1: lengths: WX = 5 − 1 = 4 and W′X′ = −1 − (−5) = 4; XY = 3 − 1 = 2 and X′Y′ = −1 − (−3) = 2. Step 2: angles: the image sides are still horizontal and vertical, so every corner is still 90°. Step 3: parallel sides: WX and ZY are both horizontal, and so are W′X′ and Z′Y′. Everything matched.
Worked example 2: a whole site moves. Eli makes a sample map of a light station. The lighthouse is at L(0, 0) and the keepers’ house at K(3, 4), with 1 unit = 100 feet. The station is translated by (x − 20, y − 20). Step 1: L′ = (−20, −20) and K′ = (−17, −16). Step 2: before, K is 3 units east and 4 units north of L. Step 3: after, −17 − (−20) = 3 east and −16 − (−20) = 4 north. The relative position is the same, just as the NPS required.
A non-example. If a rule multiplies coordinates, such as (2x, 2y), lengths double. That is a dilation, not a rigid motion. Testing lengths is the fastest way to tell the difference.
Why it matters for our logo. If our logo copies are made with rigid motions, every copy is guaranteed to match the original. A council member can check one length and one angle and trust the rest.
Measure with a ruler and protractor, or count grid units, before and after each move.
Record before-and-after measurements in a table.
Draw any triangle on grid paper. Reflect it over the y-axis. Make a table of the three side lengths and three angles before and after, and write one sentence about what you found.
A sample triangle has a perimeter of 12 cm. After a rotation, what is the perimeter of the image?
A figure is translated. One side was 7.5 cm before the move. After the move it is cm. (Write the number with one decimal place.)
Rigid motions keep lengths, angles and parallel lines. Next we write coordinate rules for translations and reflections so we can move a whole logo fast.
Exit ticket: name two things a rigid motion always keeps the same and one thing it can change.
Pacing: Do Now 6 min, reading 7, mini lesson 11, measuring and guided practice 11, exit ticket 5.
Materials: grid paper, tracing paper, rulers, protractors.
Accuracy: seven historic structures, moves in February-April, the spatial and elevational goal, three zones of jacks, sixty sensors (load, tilt, vibration, shaft diameter), the weather station and the 60 ft by 60 ft, 4 ft slab are from the NPS page; the challenge quotation is copied exactly. Eli’s map coordinates and the 100-foot unit are sample data; the page gives no distances between buildings.
Likely misconceptions: “the image is a different shape because it faces another way”; thinking perimeter or area changes after a turn; confusing “same orientation” with “same size.”
Supports: a before/after table template. Stretch: does a rigid motion keep the distance between two points that are not on the same figure? (Yes: it keeps every distance.)
Answer guide: relative position: the distances between buildings stayed the same, so the whole station after the move is congruent to the station before. Exit ticket: keeps lengths, angles, parallel lines (any two); can change position, facing direction or orientation.
National Park Service, Cape Hatteras National Seashore: Moving the Cape Hatteras Lighthouse · U.S. government work, public domain
Moving the Cape Hatteras Light Station in 1999 was more than moving one tower. The station has seven historic structures, including the keepers’ quarters and an oil house, plus cisterns and sidewalks. The other structures were moved in February, March and April, before the lighthouse.
The Park Service had a clear goal. At the new site, the buildings and cisterns had to be placed in the same spatial relationship to each other as before, meaning the same distances and directions between them. They also had to keep the same heights compared with each other.
The tower itself could not bend or lean. Three zones of hydraulic jacks kept the lighthouse lined up as it rolled. Sixty automated sensors measured the load, any tilt, vibration and the width of the tower. A weather station on top watched the wind speed and temperature.
The lighthouse now rests on a new foundation: a 60-foot by 60-foot slab of steel-reinforced concrete, 4 feet deep. The page says the light station was “whole once again,” with all the buildings in the same relative position as they were at the start.
“The light station was whole once again with all the buildings being in the same relative position as they were originally.” (National Park Service)
Source: National Park Service, Cape Hatteras National Seashore: Moving the Cape Hatteras Lighthouse (nps.gov)