dilate figures about the origin with a scale factor, using the rule (kx, ky), and explain why a dilation keeps angles and shape but changes lengths.
Phase 2: Investigate
Do Now. A sculptor makes a small model before carving a giant statue. On the model, one inch stands for one foot on the real statue. A feature on the model is 5 inches long.
How long is that feature on the giant statue?
The reading opens over the lesson; close it to come back to exactly where you were.
What a dilation does. A dilation enlarges or shrinks a figure from a center point by a scale factor k. Every distance from the center is multiplied by k, so every length in the figure is multiplied by k. Angles do not change. The image is similar to the original: same shape, new size.
The rule. For a dilation centered at the origin: (x, y) → (kx, ky). If k > 1 the image is larger. If 0 < k < 1 it is smaller. If k = 1 nothing changes. A dilation is not a rigid motion unless k = 1.
Worked example 1: model to mountain. Grace uses the 1 to 12 ratio. Step 1: 1 inch on the model stands for 1 foot = 12 inches on the mountain, so the scale factor from model to mountain is 12. Step 2: the National Park Service says George Washington’s carved head is 60 feet tall. Step 3: on the model it is 60 inches, because each foot becomes an inch. Step 4: 60 inches = 5 feet. Check: 5 feet × 12 = 60 feet.
Worked example 2: a logo on the grid. Zoe dilates triangle ABC, with A(2, 2), B(4, 2) and C(2, 6), by scale factor 1.5 about the origin. Step 1: rule (1.5x, 1.5y). Step 2: A′(3, 3), B′(6, 3), C′(3, 9). Step 3: lengths: AB = 2 and A′B′ = 3, which is 2 × 1.5. AC = 4 and A′C′ = 6, which is 4 × 1.5. Step 4: the right angle at A is still a right angle at A′.
Shrinking. With k = 1/2, the same triangle becomes (1, 1), (2, 1) and (1, 3). Every length is half as long. To find k from a point and its image, divide: if (3, 6) becomes (1, 2), then k = 1 ÷ 3 = 1/3.
Why the pointing system worked. Every measurement used the same ratio. If the nose used one ratio and the eyes another, the face would be stretched. One scale factor for everything keeps the shape.
Use the rule (kx, ky). Check one length before and after.
Show the rule and check lengths.
Dilate the sample logo square with corners (1, 1), (3, 1), (3, 3) and (1, 3) by scale factor 2 about the origin. Compare the side lengths and the areas of the two squares.
P(3, 6) is dilated about the origin to P′(1, 2). What is the scale factor?
NPS says George Washington’s carved nose is 21 feet tall. On a 1 to 12 model it is inches tall. (Write the number only.)
A dilation keeps the shape and multiplies every length by the scale factor. Next we use sequences of rigid motions to prove two figures are congruent.
Exit ticket: dilate (−2, 4) by scale factor 3 about the origin. Is the image farther from or closer to the origin? How do you know?
Pacing: Do Now 5 min, reading 7, mini lesson 11, guided practice 12, exit ticket 5.
Accuracy: Robinson’s idea, Borglum, October 4, 1927 to 1941, the 1 to 12 models (one inch = one foot), the pointing system, 90 percent dynamite, nearly 400 workers, no deaths and about two million visitors a year are from the NPS Student Guide. The head (60 ft), nose (21 ft) and eye (about 11 ft) sizes are from the NPS page “How Big Are The Heads?” (https://www.nps.gov/moru/learn/kidsyouth/how-big-are-the-heads.htm), opened the same day. The Black Hills are sacred lands of the Lakota and other Native nations, and the memorial is part of a long dispute over those lands; if students raise it, acknowledge it respectfully and point them to their social studies class.
Likely misconceptions: adding the scale factor instead of multiplying; multiplying only x; thinking angles grow. Show (2, 2) → (3, 3) is ×1.5, not +1, by testing (4, 2): +1 gives (5, 3), ×1.5 gives (6, 3).
Supports: a two-column table (original, image) with a ×k arrow. Stretch: a dilation with k = 2 followed by one with k = 1/2 gives what? (The original figure.)
Answer guide: square image (2, 2), (6, 2), (6, 6), (2, 6); sides 2 → 4, area 4 → 16 square units (4 times). Exit ticket: (−6, 12), farther, because k = 3 > 1 multiplies every distance from the origin by 3. Pointing system: different ratios would stretch some features, so the face would not be the same shape as the model.
National Park Service, Mount Rushmore National Memorial: Student Guide · U.S. government work, public domain
Mount Rushmore in South Dakota shows the faces of four presidents carved into granite. The idea came from state historian Doane Robinson, who wanted giant figures in the Black Hills. The sculptor Gutzon Borglum chose the four presidents. Work began on October 4, 1927, and ended in 1941.
How do you turn a mountain into a sculpture? Borglum first studied life masks, paintings, photographs and descriptions of each president. Then he made several models for the workers to use as guides.
The models were built at a ratio of 1 to 12. One inch on a model equaled one foot on the mountain. Borglum used the models with a measuring method called the pointing system. One pointing setup sat on the model and another sat on the mountain. Using the ratio, workers figured out how much rock to remove and where.
The page says about 90 percent of the carving was done with dynamite. Skilled blasters could remove rock to within a few inches of the planned surface. Nearly 400 workers helped, and no one died during the carving. Today around two million people visit each year.
Source: National Park Service, Mount Rushmore National Memorial: Student Guide (nps.gov)