find the rate of change and initial value of a linear function from a table, including tables whose inputs skip.
Phase 2: Investigate
Do Now. A shower runs for 4 minutes and uses 10 gallons of water. Another runs for 8 minutes. Make a quick guess before you calculate.
If the water flows at the same speed the whole time, how much does the 8-minute shower use?
The reading opens over the lesson; close it to come back to exactly where you were.
Rate of change. The rate of change of a function is the change in output divided by the change in input: rate = (change in y) ÷ (change in x). In Mathematics 8 I you called this the slope. In a story it has units, like gallons per minute.
Initial value. The initial value is the output when the input is 0. On a graph it is where the line crosses the y-axis, the y-intercept. In a story it is the starting amount.
Worked example 1: a standard shower. Sofia makes a table for a standard showerhead: minutes 0, 2, 4, 6 and gallons 0, 5, 10, 15. Step 1: the input goes up by 2 each row. Step 2: the output goes up by 5 each row. Step 3: rate = 5 ÷ 2 = 2.5 gallons per minute, matching EPA’s number. Step 4: at 0 minutes the output is 0, so the initial value is 0. The function is W = 2.5m.
Worked example 2: a tub that is not empty. Diego fills a sample tub that already holds some water. His table shows minutes 1, 3, 5 and gallons 10, 18, 26. Step 1: change in output 18 − 10 = 8. Step 2: change in input 3 − 1 = 2. Step 3: rate = 8 ÷ 2 = 4 gallons per minute. Step 4: work back one minute from (1, 10): 10 − 4 = 6. The initial value is 6 gallons, and the function is W = 4m + 6. Check: 4 × 5 + 6 = 26.
Watch the input steps. When inputs skip by 2 or 3, you must divide by that step. Using the change in output alone (8 in Diego’s table) gives the wrong rate.
Is it linear? A table shows a linear function when equal changes in input always give equal changes in output. That constant rate is the m in y = mx + b, and the initial value is the b.
For each table, write the change in output over the change in input before you divide.
Write each function in the form y = mx + b.
A sample water tank: (0, 50), (2, 46), (4, 42). Which function fits?
Make a table for a WaterSense shower for 0, 3, 6 and 9 minutes. Find the rate of change and initial value, and write the function.
Explain why you must divide by the change in input, not just look at how much the output changes. Use Diego's table.
Tables show rates and starting values. Next we find them from graphs and from just two points.
Exit ticket: in W = 4m + 6 for Diego's tub, what do the 4 and the 6 mean in the story?
Pacing: Do Now 4 min, reading 7, mini lesson 11, guided practice 13, exit ticket 5.
Accuracy: 2.5 gpm, 2.0 gpm, nearly 17 percent, nearly 40 gallons a day, 2,700 gallons a year, 330 kWh and 11 days are from the EPA page. Diego’s tub and the tank are sample data. Checked: 2.0 × 8 = 16; 20 − 16 = 4; (20 − 11)/(5 − 2) = 3; 11 − 6 = 5; 5 + 3 × 8 = 29; 4 × 5 + 6 = 26; (46 − 50)/2 = −2.
Likely misconceptions: using the output change as the rate when inputs skip; reading the first output as the initial value when the first input is not 0 (choosing 11 instead of 5); dropping the negative sign.
Supports: arrows drawn between rows labeled +2 and +8. Stretch: how many gallons does the 2,700-gallon saving represent per day? (About 7.4.)
Answer guide: 40 ÷ 2.5 = 16 minutes. WaterSense table: (0, 0), (3, 6), (6, 12), (9, 18); rate 2, initial value 0, W = 2m. Exit ticket: 4 gallons per minute flow; 6 gallons already in the tub.
U.S. Environmental Protection Agency, WaterSense: Showerheads · U.S. government work, public domain
The U.S. Environmental Protection Agency (EPA) runs a program called WaterSense that labels products that save water. Its showerheads page explains how much water showers use.
Showering is one of the main ways homes use water. EPA says it is nearly 17 percent of the water used indoors at home. For the average family, that adds up to nearly 40 gallons a day.
A standard showerhead uses 2.5 gallons of water per minute, written 2.5 gpm. A showerhead with the WaterSense label must use no more than 2.0 gallons per minute. It must also pass tests to show it still gives a good shower.
EPA estimates that the average family could save 2,700 gallons of water a year by switching to WaterSense showerheads. Using less hot water also saves energy: more than 330 kilowatt hours of electricity a year for the average family, which EPA says is enough to power a house for 11 days.
Source: U.S. Environmental Protection Agency, WaterSense: Showerheads (epa.gov)