plot a function on the coordinate plane and use the vertical line test to decide whether a graph shows a function.
Phase 2: Investigate
Do Now. Plot these points on grid paper: (1, 2), (2, 4), (3, 6) and (3, 1). Then hold a pencil straight up and down and slide it across your graph from left to right.
At which x-value does your vertical pencil touch two points?
The reading opens over the lesson; close it to come back to exactly where you were.
Graphing a function. To graph a function, plot each ordered pair (input, output) with the input on the x-axis and the output on the y-axis. The graph is a picture of every pair at once.
The vertical line test. A vertical line stands for one input. If any vertical line crosses the graph at more than one point, that input has more than one output, and the graph is not a function. If no vertical line ever crosses more than once, the graph is a function.
Worked example 1: a river gage. Bianca graphs sample stage readings taken every 15 minutes: (0, 3.2), (15, 3.4), (30, 3.9) and (45, 4.6), with time in minutes and stage in feet. Step 1: x-axis = minutes, y-axis = feet. Step 2: plot the four points. Step 3: slide a vertical line across; it never touches two points. Step 4: stage is a function of time. That makes sense: at one moment the water has one height.
Worked example 2: a graph that fails. Leo sees a sideways “U” that opens to the right. Step 1: place a vertical line at x = 4. Step 2: it crosses the curve at (4, 2) and (4, −2). Step 3: the input 4 has two outputs. Step 4: the graph is not a function.
A line from lesson 1.03. The thunder rule d = 0.2t graphs as a straight line through (0, 0), (5, 1) and (10, 2). Any non-vertical straight line passes the test. A vertical line, such as x = 3, fails: every point on it has the input 3.
Points or a connected line? Gage readings are taken every 15 minutes, but the water has a height between readings too, so connecting the points is reasonable. A ticket price graph for whole tickets would stay as separate points.
Use grid paper and a straightedge as your vertical line.
Use the reading and your grid paper.
A sample gage reads 5.0 feet at 9:00 and 5.0 feet at 9:15. Is stage still a function of time?
Graph d = t/5 for t = 0, 10, 20, 30, 40 and 50. Explain why the graph passes the vertical line test.
The reading says a creek may crest at 14.5 feet. Sketch what the graph of stage over time might look like before and after the crest.
Graphs are a fast way to spot functions. Next we measure how fast a function’s output changes, using tables.
Exit ticket: in your own words, why does the vertical line test work?
Pacing: Do Now 5 min, reading 7, mini lesson 10, guided practice with the sim 13, exit ticket 5.
Accuracy: 15-minute readings, the 14.5-foot crest example (an example radio announcement on the page), the 0.01-foot accuracy and 6-to-8-week discharge measurements are from the USGS page. Bianca’s readings and the 9:00 readings are sample data. Checked: 4.6 − 3.2 = 1.4. The sideways U is the relation x = y²; (4, 2) and (4, −2) both satisfy it.
Likely misconceptions: using a horizontal line instead of a vertical one; thinking a flat graph fails; thinking every function graph must be a line.
Supports: a transparent ruler as the vertical line. Stretch: is a circle a function? (No.) Can part of a circle be one? (Yes, the top half.)
Answer guide: d = t/5 gives (0, 0), (10, 2), (20, 4), (30, 6), (40, 8), (50, 10), a line that is not vertical, so each x has one point. Crest sketches should rise to a highest point, then fall.
U.S. Geological Survey, Water Science School: How Streamflow is Measured · U.S. government work, public domain
The U.S. Geological Survey (USGS) measures water in rivers and streams. One measurement is the stream stage, also called gage height. It is the height of the water surface, in feet, above a zero level that is often near the streambed.
During a big rainstorm, a radio report might say a creek will “crest” at 14.5 feet. That means the stage will reach its highest point at 14.5 feet.
Most USGS streamgages store a stage reading at a regular time, usually every 15 minutes. Some use a float in a well connected to the river. Others measure the pressure needed to push gas bubbles out of a tube under the water. The readings are accurate to the nearest 0.01 foot or 0.2 percent of the stage, whichever is greater.
Many people really want to know the discharge, the amount of water flowing past, in cubic feet per second. USGS workers measure discharge every 6 to 8 weeks and use those measurements to turn each stage reading into a discharge.
Source: U.S. Geological Survey, Water Science School: How Streamflow is Measured (usgs.gov)