use the formula V = πr²h to find the volume of cylinders such as planters, rain barrels and rain gauges.
Phase 4: Build
Do Now. The Planters and Water team wants round planters and a rain barrel for the garden. Both are cylinders.
A circle has radius 4 in. What is its area, in terms of π?
The reading opens over the lesson; close it to come back to exactly where you were.
Formulas (given): cylinder V = πr2h; cone V = (1/3)πr2h; sphere V = (4/3)πr3. Use π ≈ 3.14 when a decimal is asked for.
Volume of a cylinder. A cylinder is a stack of identical circles. Its volume is the area of the base circle times the height: V = πr2h. If you are given the diameter, halve it first to get the radius. Volume is in cubic units, such as in3 or ft3.
Exact or decimal? An answer like 16π is exact. For a decimal, multiply by 3.14: 16π ≈ 50.24. Write which one you used.
Worked example 1: Grace models the rain gauge. The funnel is 8 in across, so r = 4 in. Step 1: base area = π × 42 = 16π in2. Step 2: one inch of rain over that opening is V = 16π × 1 = 16π ≈ 50.24 in3 of water. Step 3: the tube has one tenth of the area, 1.6π in2. The same water stands 16π ÷ 1.6π = 10 in deep, as the reading says. Check: the full 20-in tube holds 1.6π × 20 = 32π in3, which is 2 inches of rain over the funnel (16π × 2 = 32π). That matches the 2.0-inch capacity.
Worked example 2: Andre fills a planter. A sample round planter is 4 ft across and 2 ft deep. Step 1: r = 4 ÷ 2 = 2 ft. Step 2: V = π × 22 × 2 = 8π ≈ 25.12 ft3. Step 3: soil comes in sample 2 ft3 bags, and 25.12 ÷ 2 = 12.56, so he buys 13 bags. Twelve bags would leave the planter short.
Write the formula, then the numbers, then the answer with cubic units.
Make a Planters and Water card.
Design two sample cylinder planters with different radii and heights that hold close to the same amount of soil. Find each volume, exact and decimal, and say which one you would pitch and why.
A sample rain barrel is 2 ft across and 3 ft tall. Find its volume. Then find the volume of a barrel twice as wide and the same height. How many times as much does it hold?
Base area times height: the cylinder is a stack of circles.
Exit ticket: Kim found the volume of a can 4 in across and 5 in tall as π × 4² × 5 = 80π in³. What did she do, and what is the correct volume?
Pacing: warm-up and reading 8 minutes, mini lecture 10, guided practice 13, independent 7, closure 2.
Likely misconceptions: using the diameter as the radius (72π instead of 18π); multiplying by 2 instead of squaring (π × 3 × 2 × 5); thinking doubling the radius doubles the volume; writing square units.
Supports: a formula card; a sketch template with r and h labeled; empty cans to measure. Stretch: the gauge tube’s area is 1.6π in², so its radius squared is 1.6 and its radius is about 1.26 in (1.26² = 1.5876); compare with the funnel.
Answer guide: warm-up 16π; 45π; 40; 18π; false; 9.42 ft³; 50.24 in³. Explanation: the same water spread over one tenth of the area must be ten times as tall (volume = area × height). Barrels: r = 1, V = 3π ≈ 9.42 ft³; r = 2, V = 12π ≈ 37.68 ft³; 4 times as much. Exit ticket: Kim used the diameter; r = 2, so V = π × 4 × 5 = 20π ≈ 62.8 in³. Gauge facts are from the NWS page; the 16π and 1.6π values are our own calculations from the page’s 8-inch and 10-to-1 figures.
National Weather Service, Northern Indiana office: The 8-inch Standard Rain Gauge · U.S. government work, public domain
Weather observers at National Weather Service Cooperative Weather Stations measure rain with the 8-inch standard rain gauge. This page explains how it works.
The gauge has four main parts: a collector funnel, a measuring tube, an overflow can and a measuring stick. The funnel at the top is 8 inches across. Rain runs down the funnel into the measuring tube, a narrow cylinder 20 inches tall.
Here is the clever part. The funnel’s opening has 10 times the area of the tube. So the water gets ten times deeper in the tube. When 1 inch of rain falls, the water in the tube is 10 inches deep. That makes small amounts easy to read. The tube can hold 2.0 inches of rain.
If more than 2 inches falls, extra water spills into the overflow can, which can hold up to 20 inches. The observer pours that water into the empty tube to measure it, instead of measuring in the can.
To read the gauge, the observer slides the measuring stick to the bottom of the tube, pulls it out right away and reads the wet mark to the nearest hundredth of an inch.
Source: National Weather Service, Northern Indiana office: The 8-inch Standard Rain Gauge (weather.gov)