find and fix common errors with functions, rates of change and initial values, and explain why each fix is correct.
Phase 3: Make Sense
Do Now. A student writes: “A savings account starts at $12 and grows by $5 a week, so y = 12x + 5.” Test the student’s equation with x = 3.
After 3 weeks, how much should really be in the account?
The reading opens over the lesson; close it to come back to exactly where you were.
Mistakes are data. Analysts fix models all the time; USGS adjusts its rating curves when new measurements disagree. Today we study six common mistakes so our dashboard avoids them.
Mistake 1: swapping m and b. “Starts at $12, adds $5 a week” is y = 5x + 12, not 12x + 5. Fix: the number multiplied by x is the per amount.
Mistake 2: ignoring input steps. For x = 0, 2, 4 and y = 1, 7, 13, the output goes up 6 each row, but the input goes up 2. Fix: m = 6 ÷ 2 = 3, so y = 3x + 1.
Worked example 1: rate upside down. Jasmine finds the rate through (1, 3) and (3, 11) as (3 − 1) ÷ (11 − 3) = 2/8 = 0.25. Step 1: check with the table: from x = 1 to x = 3 the output rose 8, far more than 0.25 per step. Step 2: the rate is change in y over change in x. Step 3: (11 − 3) ÷ (3 − 1) = 8 ÷ 2 = 4. Step 4: b = 3 − 4 = −1, so y = 4x − 1. Check: 4 × 3 − 1 = 11.
Worked example 2: a lost negative sign. Tyler models a sample tank with (0, 20) and (4, 12) as y = 2x + 20. Step 1: test x = 4: 2 × 4 + 20 = 28, not 12. Step 2: recompute: (12 − 20) ÷ 4 = −8 ÷ 4 = −2. Step 3: y = −2x + 20. Step 4: check: −8 + 20 = 12. A falling story needs a negative rate.
Mistake 5: “a repeated output breaks the rule.” {(1, 5), (2, 5)} is a function. Only one input with two outputs breaks it.
Mistake 6: assuming every trend is linear. The USGS rating curve is a curve. Before using y = mx + b, check that the differences are constant.
For each item: find the mistake, fix it and check with one point.
Be the checker for these sample student answers.
Story: “A plant is 4 cm tall and grows 1.5 cm a week.” A student wrote h = 4w + 1.5. What does the student's model give at week 2?
The USGS reading says rating curves change when channels change. Explain why an analyst should re-check any model when new data arrives.
Which of the six mistakes do you make most often? Write a tip to your future self to avoid it.
We know what to watch for. Next we model a real local trend and ask how far we can trust a prediction.
Exit ticket: what is one quick check that catches most model mistakes? Explain with an example.
Pacing: Do Now 4 min, reading 6, mini lesson 12, guided practice 13, exit ticket 5.
Accuracy: 25 to 30 locations, current meters and ADCPs, 6 to 8 weeks, the channel factors and the 115 years are from the USGS page. All student answers, the tank and the plant are sample data. Every wrong answer was re-derived: 12 × 3 + 5 = 41; 2/8 = 0.25; 2 × 4 + 20 = 28; 4 × 2 + 1.5 = 9.5 (correct model gives 1.5 × 2 + 4 = 7). Right answers: 5 × 3 + 12 = 27; y = 3x + 1; y = 4x − 1; y = −2x + 20.
Likely misconceptions: believing the first number in a story is always m; thinking a checker should only look at the final answer.
Supports: a mistake checklist card with the six mistakes. Stretch: ask why a rating curve cannot be a single straight line through (0, 0) for a real river (the zero stage is set near the bed, and flow does not grow at a constant rate).
Answer guide: the quick check: substitute a known pair from the story or table into the model. Analysts re-check because the real situation can change, as USGS channels do.
U.S. Geological Survey, Water Science School: How Streamflow is Measured · U.S. government work, public domain
The USGS measures how much water flows in a river, called discharge. Workers measure the water’s speed and depth at many points across the river, usually 25 to 30 spots, often with a current meter that spins in the flow or with a sound device called an ADCP.
Measuring discharge takes time, so it is done only every 6 to 8 weeks at most gages. The stage, or water height, is recorded much more often. To connect the two, USGS builds a stage-discharge relation, also called a rating curve. It is a graph of many pairs of stage and discharge measured at the same time.
The rating curve is different for every gage, because it depends on the shape, size, slope and roughness of the channel. Channels change over time from erosion, plant growth, debris or ice, so USGS keeps checking the curve with new measurements and adjusts it when needed.
USGS says it has provided streamflow information for more than 115 years.
Source: U.S. Geological Survey, Water Science School: How Streamflow is Measured (usgs.gov)