
measure the period of a pendulum at several lengths, linearize the data to find g with an uncertainty, and compare it with the value predicted by Newton’s law of gravitation.
Instruction
What is g, really? In Units 1 and 2 you used g = 9.8 m/s2 as a given. In this unit, g becomes a prediction: Newton’s law of gravitation (Lesson 4.3) says the gravitational field at Earth’s surface is GM/R2 = (6.674 × 10−11)(5.972 × 1024)/(6.371 × 106)2 = 9.82 m/s2. Today you measure g yourself with a pendulum, a string and a phone timer, and check the prediction.
The pendulum model. For small swings (less than about 15° from vertical), a simple pendulum of length L (from the pivot to the center of the bob) has a period
T = 2π√(L/g)
The period does not depend on the bob’s mass or, for small swings, on how far you pull it back. The restoring force comes from gravity, so a stronger field means a faster swing. Worked example: a 0.75 m pendulum has T = 2π√(0.75/9.8) = 1.74 s. A pendulum with a 2.00 s period (one second per swing) must be L = g(T/2π)2 = 0.993 m long.
Linearize to find g. Square both sides: T2 = (4π2/g)L. A graph of T2 against L should be a straight line through the origin with slope 4π2/g, so g = 4π2/slope. This is the same move as graphing x against t2 in Unit 1.
Illustrative data.
| Length L (m) | Time for 10 swings (s) | Period T (s) | T2 (s2) | Model 2π√(L/g) (s) |
|---|---|---|---|---|
| 0.20 | 9.1 | 0.91 | 0.828 | 0.90 |
| 0.40 | 12.6 | 1.26 | 1.588 | 1.27 |
| 0.60 | 15.7 | 1.57 | 2.465 | 1.55 |
| 0.80 | 18.1 | 1.81 | 3.276 | 1.80 |
| 1.00 | 20.0 | 2.00 | 4.000 | 2.01 |
The least-squares line is T2 = 4.016L + 0.022. Then g = 4π2/4.016 = 9.83 m/s2, 0.3% from 9.8 m/s2. The small intercept is close to zero, as the model predicts.
Why time 10 swings? Your reaction time at the start and stop of a stopwatch adds roughly ±0.2 s. On a single 2.0 s swing that is 10% uncertainty; on 10 swings (about 20 s) it is only 1%. Then divide by 10. Because g depends on T2, a 1% timing error becomes about a 2% error in g. Measure L to the center of the bob; measuring to its top makes every L too short and pushes g too low.
Misconceptions. (1) “A heavier bob swings faster.” Heavier bobs feel more gravitational force but have proportionally more inertia; the mass cancels, just as in free fall. (2) “Bigger swings take longer by a lot.” For small angles the period barely changes; at 30° it is only about 2% longer. (3) “g is exactly 9.8 everywhere.” It varies slightly with latitude and altitude, and is noticeably smaller in orbit.
📖 Read for this lesson
The reading opens over the lesson; close it to come back to exactly where you were. The checks below draw on it.
Lab: Pendulum lab: measuring g with a string and a stopwatch
Question. What value of g do pendulum periods give, and does it agree with the gravitational field predicted by GM/R2?
Materials
- About 1.3 m of thin string or dental floss
- A bob: a heavy nut, a fishing weight or a bag of coins (20-100 g)
- A rigid support such as a hook in a door frame, or a ruler taped firmly to a table edge with a heavy book holding it down
- Meter stick, protractor and a stopwatch or phone timer
- Clamp or tape the support firmly so it cannot fall; keep swings small so the bob cannot hit anyone.
- Keep your face away from the plane of the swing and wear safety glasses in case the knot slips.
Procedure
- Tie the bob to the string and hang it from the support. Adjust the length so L, measured from the pivot to the center of the bob, is 0.20 m.
- Pull the bob aside about 10° (check with the protractor) and release it without pushing. Time 10 full swings (there and back) starting on a count of zero. Repeat three times and average.
- Repeat at L = 0.40, 0.60, 0.80 and 1.00 m (or the longest your support allows).
- At one length, test the model: change the bob’s mass, then change the release angle to 20°, and time 10 swings each.
- Compute T and T2 for each length, graph T2 against L, fit a straight line, and compute g = 4π2/slope.
Data
| Length L (m) | Time for 10 swings (s) | Period T (s) | T2 (s2) | Model 2π√(L/g) (s) |
|---|---|---|---|---|
| 0.20 | 9.1 | 0.91 | 0.828 | 0.90 |
| 0.40 | 12.6 | 1.26 | 1.588 | 1.27 |
| 0.60 | 15.7 | 1.57 | 2.465 | 1.55 |
| 0.80 | 18.1 | 1.81 | 3.276 | 1.80 |
| 1.00 | 20.0 | 2.00 | 4.000 | 2.01 |
| Rows above are illustrative sample data; record three timings of 10 swings at each length. | ||||
Analysis
- Claim-evidence-reasoning: what is your measured g, and does it agree with GM/R2 = 9.82 m/s2 within your uncertainty? Use your graph’s slope and linearity as evidence.
- Estimate the uncertainty in g from the spread of your repeated timings (remember g depends on T2).
- Did changing the bob’s mass or the release angle change the period? Explain what that tells you about the model.
- Name two sources of systematic error (for example measuring L to the top of the bob, or a support that flexes) and the direction each pushes g.
If you cannot do this lab in person: Use PhET Pendulum Lab (Lab screen, friction off): set lengths from 0.20 to 1.00 m, time 10 swings with the sim’s stopwatch, and graph T2 against L. The illustrative dataset in the lesson also supports every analysis step.
Formative check
Work through these before moving on. They are not graded — they tell you whether the standard below has landed yet.
Your graph of T2 against L has slope 4.10 s2/m. What value of g does it give?
A pendulum 0.75 m long has a period of s. To double the period, the length must become m.
Timing 10 swings and dividing by 10 reduces the effect of your reaction time on the period.
Simulation & tools
Pendulum period, length and gravity
Open the Lab screen, set friction to none, and turn on the stopwatch and ruler. Set the length to 0.50 m and the mass to 1.0 kg, release from 10°, and time 10 swings. Then: (1) change only the mass to 1.5 kg; (2) change only the angle to 20°; (3) change only the length to 1.00 m; (4) set gravity to the Moon and repeat 0.50 m. Record each period and predict (3) and (4) with T = 2π√(L/g) before you run them. Which variables change the period? No device: compute the periods for 0.50 m and 1.00 m on Earth and 0.50 m on the Moon (g = 1.62 m/s2) and explain why mass does not appear in the formula.
Open in a new tab ↗ · PhET Interactive Simulations, University of Colorado Boulder · CC BY 4.0
How confident are you that you can measure g with a pendulum by linearizing my data, and compare it with the gravitational field predicted by GM/R<sup>2</sup>?
Practice
Work these on paper or in your notebook, then open Check your answer. Aim for all of Fluency and Application; try at least one Challenge.
Printable version: this unit’s practice workbook (PDF)
Fluency
Build speed and accuracy with the core skill.
- Find the slope of the line through (−9, −2) and (0, −1).
Check your answer
Answer: m = 1/9m = (−1 − (−2)) ÷ (0 − (−9)) = 1/9 - An object is dropped from rest 45 m above the ground. Ignoring air resistance (g = 9.8 m/s2), how long does it fall and how fast is it moving at impact?
Check your answer
Answer: 3.03 s; 29.7 m/sh = ½gt2; v = gt. - An object is dropped from rest 1.2 m above the ground. Ignoring air resistance (g = 9.8 m/s2), how long does it fall and how fast is it moving at impact?
Check your answer
Answer: 0.49 s; 4.8 m/sh = ½gt2; v = gt. - Find the period of a 0.50 m pendulum on Earth.
Check your answer
Answer: 1.42 sT = 2π√(L/g). - How long must a pendulum be to have a period of 1.00 s?
Check your answer
Answer: 0.248 mL = g(T/2π)2. - The same 0.50 m pendulum is taken to the Moon (g = 1.62 m/s2). What is its period?
Check your answer
Answer: 3.49 sWeaker gravity, slower swing: 2π√(0.50/1.62). - A T2-versus-L graph has slope 4.10 s2/m. What value of g does it give?
Check your answer
Answer: 9.63 m/s2g = 4π2/slope.
Application
Use the skill in context. Show your reasoning.
- A 0.80 m pendulum takes 17.9 s for 10 swings. Find g and the percent difference from 9.8 m/s2.
Check your answer
Answer: 9.86 m/s2; 0.6%T = 1.79 s; g = 4π2L/T2 = 9.86 m/s2. - Use Newton’s law of gravitation to predict g at Earth’s surface (G = 6.674 × 10−11, M = 5.972 × 1024 kg, R = 6.371 × 106 m).
Check your answer
Answer: 9.82 m/s2g = GM/R2. - A student measures L to the top of the bob instead of its center, so every L is 2 cm too short. Will the computed g be too high or too low? Explain.
Check your answer
Answer: Too lowg = 4π2L/T2; the periods are correct but every L is underestimated, so g comes out low.
Challenge
Stretch problems. Expect to think before you write.
- Timing 10 swings of a 2.0 s pendulum with ±0.2 s reaction error, what is the percent uncertainty in T and in g? How many swings would you time to get g within 0.5%?
Check your answer
Answer: 1% in T, 2% in g; about 40 swings0.2/20 = 1% in T; g ∝ 1/T2 doubles it to 2%. For 0.5% in g you need 0.25% in T: 0.2 s/(n × 2.0 s) = 0.0025 gives n = 40.
Review
Keep earlier skills sharp.
- What net force gives a 0.5 kg object an acceleration of 4.5 m/s2?
Check your answer
Answer: 2.25 NFnet = ma. - A 4 kg box is pushed with 120 N to the right against 7 N of friction. Find the net force and the acceleration.
Check your answer
Answer: net force 113 N to the right; a = 28.25 m/s2Add forces as vectors: the net force is the applied force minus friction.
Pendulum Record: Three Timings per Length, the Fit for g, and the Reference Values It Must Meet
SLS original three-timing record for the lesson’s five lengths (illustrative); NIST CODATA 2022 values of G and standard gravity; NASA NSSDC Earth Fact Sheet; Missouri state boundary extent (Missouri Department of Agriculture Land Survey Program, gis.mo.gov); all retrieved November 5, 2026 · SLS original (CC BY 4.0); NIST and NASA values public domain (works of the United States government)
Why this reading. The lab asks for a measured g with an uncertainty from the spread of repeated timings and a comparison with GM/R2. The lesson’s table has one timing per length, and its 9.82 m/s2 arrives without its inputs. Here are three timings per length with realistic stopwatch scatter (their means reproduce the lesson’s table), the fit worked in the open, and the reference constants from the agencies that publish them, so the comparison is against a sourced number.
1. The record (illustrative)
Bob: a 50 g steel nut. L measured from the pivot to the center of the nut, ±0.003 m. Release at 10°. Ten full swings timed by hand, three times per length. A hand stopwatch has about ±0.2 s of start-stop reaction time on each timing.
| L (m) | 10 swings, timing 1 (s) | Timing 2 | Timing 3 | Mean (s) | T (s) | T2 (s2) |
|---|---|---|---|---|---|---|
| 0.20 | 9.0 | 9.2 | 9.1 | 9.1 | 0.91 | 0.828 |
| 0.40 | 12.5 | 12.7 | 12.6 | 12.6 | 1.26 | 1.588 |
| 0.60 | 15.8 | 15.6 | 15.7 | 15.7 | 1.57 | 2.465 |
| 0.80 | 18.0 | 18.2 | 18.1 | 18.1 | 1.81 | 3.276 |
| 1.00 | 20.1 | 19.9 | 20.0 | 20.0 | 2.00 | 4.000 |
2. The fit
Least-squares line of T2 against L: T2 = 4.016L + 0.022. The model says the slope is 4π2/g, so g = 4π2/4.016 = 39.478/4.016 = 9.83 m/s2. The intercept, 0.022 s2, is small: the model predicts zero, and 0.022 s2 corresponds to about 5 mm of length, which is the size of the uncertainty in locating the nut’s center.
Uncertainty from the spread. At each length the three timings span 0.2 s on a mean near 9 to 20 s: 2.2% at 0.20 m, 1.0% at 1.00 m. Because g depends on T2, the corresponding uncertainty in g from a single length is about 4% at the short end and 2% at the long end. The fit across five lengths does better than any one of them; fitting the line to the three lowest timings and then to the three highest gives slopes that differ by about 2%, so g = 9.83 ± 0.2 m/s2 is an honest statement of this record.
3. The reference values
| Constant | Value as published | Source |
|---|---|---|
| Newtonian constant of gravitation G | 6.674 30(15) × 10−11 m3 kg−1 s−2 | NIST CODATA 2022 |
| Standard acceleration of gravity gn | 9.806 65 m/s2 (exact, by definition) | NIST |
| Earth mass | 5.9722 × 1024 kg | NASA NSSDC Earth Fact Sheet |
| Earth volumetric mean radius | 6,371.000 km | NASA NSSDC |
| Earth GM | 0.39860 × 106 km3/s2 = 3.9860 × 1014 m3/s2 | NASA NSSDC |
| Earth surface gravity, mean | 9.820 m/s2 | NASA NSSDC |
| Earth surface gravity, equatorial | 9.780 m/s2 | NASA NSSDC |
The prediction. g = GM/R2 = 3.9860 × 1014/(6.371 × 106)2 = 3.9860 × 1014/4.0590 × 1013 = 9.820 m/s2, which is NASA’s own mean surface gravity to three decimals. Multiplying G by the Earth mass gives GM = 6.67430 × 10−11 × 5.9722 × 1024 = 3.9860e+14 m3/s2, agreeing with NASA’s GM to four figures, which is a check that the two agencies’ numbers are consistent. The fitted 9.83 is 0.1% above 9.820 and inside the ±0.2 uncertainty.
Three reference values, three different things. 9.80665 is a defined conventional value, not a measurement; 9.820 is the mean over Earth’s surface from the fact sheet; 9.780 is the equatorial value, lower because the equator is farther from the center and Earth spins. A pendulum in Missouri, which lies between 35.96° and 40.62° north latitude (state boundary data), should sit between those two, and a measurement with ±0.2 uncertainty cannot tell them apart. That is what “agrees within uncertainty” means.
4. The controls (illustrative)
| Test at L = 0.60 m | 10 swings (s) | T (s) |
|---|---|---|
| 50 g nut, 10° release (from the record) | 15.7 | 1.57 |
| 150 g nut, 10° | 15.7 | 1.57 |
| 50 g nut, 20° | 15.8 | 1.58 |
| 50 g nut, 30° | 16.0 | 1.60 |
Tripling the mass changed nothing measurable; doubling the angle to 20° changed the period by 0.6%, inside the timing spread; 30° is where the small-angle model begins to show, about 2% long, as the lesson says.
Your turn
- Compute T and T2 from the means for 0.40 and 0.80 m and confirm the table, then fit the line by hand using the 0.20 m and 1.00 m points only. How far is that two-point g from the least-squares g?
- Estimate the uncertainty in g from the spread at 1.00 m alone, remembering the square. Then state g with its uncertainty and say whether it agrees with 9.820.
- Suppose every L had been measured to the top of the nut, 1.5 cm short of its center. Refit (subtract 0.015 from each L) and report which way g moves and by how much.
- Use G, Earth’s mass and its radius to compute g at 400 km altitude. Lesson 4.3 will need it.
Sources: NIST CODATA 2022, Newtonian constant of gravitation (physics.nist.gov); NIST, standard acceleration of gravity (physics.nist.gov); NASA NSSDC, Earth Fact Sheet (nssdc.gsfc.nasa.gov); Missouri Department of Agriculture, Land Survey Program, State boundary map service (extent) (gis.mo.gov)