
measure a cart’s acceleration for several pulling forces at constant mass, graph a against F, and use the slope and intercept to find the system’s mass and the friction force.
Instruction
The claim to test. Newton’s second law says acceleration is proportional to net force and inversely proportional to mass: a = Fnet/m. 9-12.PS2.A.1 asks you to support that claim with data. Today you pull a cart with a falling mass and measure the acceleration for six different pulling forces.
The setup, and why the total mass stays fixed. A cart on a level track is tied by a string over a pulley to a small hanger. The system is the cart plus the hanging mass, and the pulling force on that system is the hanger’s weight, mhg. To change the force without changing the system’s mass, keep a set of slotted masses on the cart and move them one at a time from the cart to the hanger. The total mass M never changes, so any change in acceleration comes from the change in force alone. That is a controlled variable.
Measuring acceleration. Release the cart from rest and time it over a measured distance d (0.800 m here), or use phone video as in Unit 1. From rest with constant acceleration, d = ½at2, so a = 2d/t2. Worked example: t = 1.23 s gives a = 2(0.800)/1.232 = 1.058 m/s2.
Illustrative data. Cart plus all slotted masses and hanger: M = 0.520 kg.
| Hanging mass mh (g) | Pulling force mhg (N) | Time over 0.800 m (s) | a = 2d/t2 (m/s2) |
|---|---|---|---|
| 10 | 0.098 | 3.86 | 0.107 |
| 20 | 0.196 | 2.29 | 0.305 |
| 30 | 0.294 | 1.83 | 0.478 |
| 40 | 0.392 | 1.51 | 0.702 |
| 50 | 0.490 | 1.37 | 0.852 |
| 60 | 0.588 | 1.23 | 1.058 |
Reading the graph. If a = F/M, the graph of a against F is a straight line with slope 1/M. The least-squares line through these points is a = 1.929F − 0.078, with r2 = 0.9985. The slope gives M = 1/1.929 = 0.518 kg, within 0.3% of the balance reading. The line does not pass through the origin: it crosses the force axis at 0.040 N. That intercept is evidence for friction in the wheels and pulley. The cart only accelerates once the pull exceeds about 0.04 N, and the true net force is mhg − f.
The string tension is less than the hanger’s weight. A common error is to say the string pulls the cart with mhg. If it did, the hanger would feel zero net force and could not accelerate. For a 50 g hanger and no friction, a = mhg/M = 0.942 m/s2 and the tension is T = mh(g − a) = 0.443 N, less than the 0.49 N weight. Treat the cart and hanger as one system and you never need the tension.
Uncertainty. If a hand-timed run of 2.00 s is uncertain by ±0.05 s (2.5%), the acceleration, which depends on 1/t2, is uncertain by about twice that, 5%. Time each force at least three times, use the longest track you can, and let the graph average out the scatter. The slope of a line through six points is more trustworthy than any single trial.
📖 Read for this lesson
The reading opens over the lesson; close it to come back to exactly where you were. The checks below draw on it.
Lab: Cart and hanging mass: is acceleration proportional to net force?
Question. With the total mass held constant, how does a cart’s acceleration depend on the pulling force, and what mass and friction force does the graph reveal?
Materials
- A low-friction toy truck or toy car (or a dynamics cart if you have one), and a level track or smooth table at least 1 m long
- A pulley clamped to the table edge (or a smooth round pencil taped down) and about 1.5 m of thin string
- A paper-clip or cup hanger and six 10 g masses (coins, washers or slotted masses) massed on a kitchen scale
- Meter stick, masking tape, and a phone for video timing or a stopwatch
- A folded towel or box on the floor below the hanger and a stop block at the end of the track
- Put a towel or box under the falling hanger and a stop block at the end of the track so nothing crashes to the floor or rolls into a walkway.
- Keep hands, hair and sleeves clear of the pulley and the moving string.
- Wear safety glasses or goggles in case the string snaps or a mass flies off the hanger.
Procedure
- Mass the cart, the hanger and every slotted mass. Put all six 10 g masses on the cart and record the total system mass M (cart + hanger + all masses).
- Tape a start line and a finish line 0.800 m apart on the track (a shorter distance is fine if the hanger would hit the floor first; the hanger must fall that far freely).
- Move one 10 g mass from the cart to the hanger. Hold the cart at the start line, release it from rest, and time its trip to the finish line. Do three trials and average them.
- Move a second mass from the cart to the hanger and repeat. Continue until all six masses are on the hanger, so the pulling force rises in six steps while M stays fixed.
- Compute F = mhg and a = 2d/t2 for each step. Graph a against F and draw (or fit in a spreadsheet) the best straight line.
- Find the slope and the force-axis intercept. Compute M = 1/slope and compare it with your balance reading.
Data
| Hanging mass mh (g) | Pulling force mhg (N) | Time over 0.800 m (s) | a = 2d/t2 (m/s2) |
|---|---|---|---|
| 10 | 0.098 | 3.86 | 0.107 |
| 20 | 0.196 | 2.29 | 0.305 |
| 30 | 0.294 | 1.83 | 0.478 |
| 40 | 0.392 | 1.51 | 0.702 |
| 50 | 0.490 | 1.37 | 0.852 |
| 60 | 0.588 | 1.23 | 1.058 |
| Rows above are illustrative sample data (M = 0.520 kg); build your own table with three timed trials per row and their mean. | |||
Analysis
- Claim-evidence-reasoning: does your graph support a ∝ F at constant mass? Use the straightness of the line (and r2 if you fitted it) as evidence and Fnet = ma as reasoning.
- Compute M from the slope and its percent difference from the balance reading. Is the difference larger than your timing uncertainty would explain?
- Interpret the force-axis intercept. What physical force does it represent, and how would the graph change on a rougher track?
- Name two other sources of error (for example string stretch, a track that is not level, or reaction time) and state which way each pushes your acceleration.
If you cannot do this lab in person: Use the illustrative dataset in the lesson, or the full three-trial record in this lesson’s reading, to complete every analysis step. For a model check, use PhET Forces and Motion: Basics (Acceleration screen, friction off): apply 50, 100, 150 and 200 N to the 50 kg crate, record a, and graph a against F.
Formative check
Work through these before moving on. They are not graded — they tell you whether the standard below has landed yet.
Your a-versus-F graph is a straight line with slope 2.50 kg−1. What is the mass of the accelerating system?
A cart starts from rest and covers 0.800 m in 1.60 s. Its acceleration is m/s2.
Moving slotted masses from the cart to the hanger changes the pulling force without changing the total mass being accelerated.
Write your lab conclusion (150-200 words): your claim about a and F, the slope and intercept of your graph with units, the mass you calculated and its percent difference from the balance, and the source of error you think mattered most, with the direction it pushed your result.
How confident are you that you can collect and graph force-acceleration data and use the slope and intercept to support Newton’s second law?
Practice
Work these on paper or in your notebook, then open Check your answer. Aim for all of Fluency and Application; try at least one Challenge.
Printable version: this unit’s practice workbook (PDF)
Fluency
Build speed and accuracy with the core skill.
- A net force of 18.0 N gives an object an acceleration of 1.5 m/s2. What is its mass?
Check your answer
Answer: 12.00 kgm = Fnet/a. - What net force gives a 1.2 kg object an acceleration of 4.5 m/s2?
Check your answer
Answer: 5.40 NFnet = ma. - A 4 kg box is pushed with 37 N to the right against 18 N of friction. Find the net force and the acceleration.
Check your answer
Answer: net force 19 N to the right; a = 4.75 m/s2Add forces as vectors: the net force is the applied force minus friction. - An object starts at 3 m/s and accelerates at 3 m/s2 for 8 s. How far does it travel?
Check your answer
Answer: 120.0 md = v0t + ½at2. - An object starts at 3 m/s and accelerates at 1 m/s2 for 7 s. How far does it travel?
Check your answer
Answer: 45.5 md = v0t + ½at2. - A cart starts from rest and covers 0.90 m in 1.40 s. What is its acceleration?
Check your answer
Answer: 0.918 m/s2a = 2d/t2 = 1.80/1.96 = 0.918 m/s2. - An a-versus-F graph has slope 1.60 kg−1. What mass was accelerated?
Check your answer
Answer: 0.625 kgSlope = 1/M, so M = 1/1.60.
Application
Use the skill in context. Show your reasoning.
- A 30 g hanger pulls a cart; the total system mass is 0.80 kg and friction is negligible. Find the acceleration and the tension in the string.
Check your answer
Answer: a = 0.367 m/s2; T = 0.283 NSystem: a = mhg/M = (0.030)(9.8)/0.80 = 0.367 m/s2. Hanger: T = mh(g − a) = 0.283 N, less than its 0.294 N weight. - A student’s a-versus-F line crosses the force axis at 0.05 N instead of the origin. Explain what this intercept means and how to correct the net force.
Check your answer
Answer: About 0.05 N of friction opposes the pull; Fnet = mhg − 0.05 NThe cart does not accelerate until the pull exceeds friction, so the graph is shifted right by the friction force. - Why must the slotted masses move from the cart to the hanger, rather than being added from a separate pile, when testing a ∝ F?
Check your answer
Answer: To keep the total accelerated mass constantAdding new masses to the hanger would raise both F and M, so a change in a could not be attributed to F alone. Moving them keeps M fixed: a controlled variable.
Challenge
Stretch problems. Expect to think before you write.
- Six trials give (F in N, a in m/s2): (0.10, 0.15), (0.20, 0.35), (0.30, 0.52), (0.40, 0.71), (0.50, 0.90), (0.60, 1.08). Find the least-squares slope and intercept, then the mass and friction force.
Check your answer
Answer: slope 1.854 kg−1, intercept −0.031 m/s2; M = 0.539 kg; friction ≈ 0.017 NLeast squares: slope = 1.854, intercept = −0.031. M = 1/slope = 0.539 kg. The line crosses a = 0 at F = −intercept/slope = 0.017 N, the friction force.
Review
Keep earlier skills sharp.
- An object is dropped from rest 1.2 m above the ground. Ignoring air resistance (g = 9.8 m/s2), how long does it fall and how fast is it moving at impact?
Check your answer
Answer: 0.49 s; 4.8 m/sh = ½gt2; v = gt. - An object is dropped from rest 45 m above the ground. Ignoring air resistance (g = 9.8 m/s2), how long does it fall and how fast is it moving at impact?
Check your answer
Answer: 3.03 s; 29.7 m/sh = ½gt2; v = gt.
Cart Lab Record: Three Timed Trials per Force, the Balance Readings and the Fit
SLS original timing record for the lesson’s cart-and-hanger setup (0.800 m, six pulling forces, three trials each) with a second, rougher-track set; constructed teaching data whose trial means reproduce the lesson’s table · SLS original (CC BY 4.0); constructed teaching data, labeled illustrative
Why this reading. The lab conclusion asks for the slope and intercept of your graph, the percent difference from the balance, and the error that mattered most with its direction. The lesson’s table gives one time per force and the answers already computed. Here is the record underneath: the balance readings, three trials per force with the scatter a hand stopwatch produces, the fit worked in the open, and a second set from a rougher track so the intercept question has two cases to compare. All of it is constructed; the trial means equal the lesson’s times exactly.
Balance readings
| Item | Mass (kg) |
|---|---|
| Cart with string and bumper | 0.435 |
| Hanger (paper clip and cup) | 0.025 |
| Six slotted masses, 0.010 kg each | 0.060 |
| System M (cart + hanger + all six masses) | 0.520 |
The masses move from cart to hanger one at a time, so M is 0.520 kg in every row. The pulling force is the hanger load’s weight, mhg, with g = 9.8 m/s2. Track distance d = 0.800 m; a = 2d/t2 = 1.600/t2.
Set 1: the lesson’s track
| Hanging mass (g) | F = mhg (N) | Trial 1 (s) | Trial 2 (s) | Trial 3 (s) | Mean t (s) | a = 1.6/t2 (m/s2) |
|---|---|---|---|---|---|---|
| 10 | 0.098 | 3.90 | 3.80 | 3.88 | 3.86 | 0.107 |
| 20 | 0.196 | 2.31 | 2.26 | 2.30 | 2.29 | 0.305 |
| 30 | 0.294 | 1.85 | 1.80 | 1.84 | 1.83 | 0.478 |
| 40 | 0.392 | 1.53 | 1.48 | 1.52 | 1.51 | 0.702 |
| 50 | 0.490 | 1.39 | 1.34 | 1.38 | 1.37 | 0.852 |
| 60 | 0.588 | 1.25 | 1.20 | 1.24 | 1.23 | 1.058 |
The fit
Least-squares line of a against F: a = 1.929F -0.078, with r2 = 0.9985. Slope 1/M gives M = 1/1.929 = 0.518 kg, against 0.520 kg on the balance: a percent difference of 0.3%. The line crosses the force axis where a = 0, at F = 0.040 N. The cart needs about 0.04 N of pull before it accelerates at all, and that 0.04 N is friction in the wheels and pulley.
Look at the scatter before you trust the fit. In the first row the three trials span 0.10 s on a mean of 3.86 s (2.6%); because a depends on 1/t2, that is about 5% in a. In the last row 0.05 s on 1.23 s is 4%, so 8% in a. The fast runs are the least certain, which is the opposite of the ramp lab, where the long times were best. A longer track fixes both.
Set 2: a rougher track (illustrative)
A second set was run with the same procedure on a warped board with a pencil for a pulley. Its friction was about 0.12 N.
| Hanging mass (g) | F (N) | Mean t over 0.800 m (s) | a (m/s2) |
|---|---|---|---|
| 10 | 0.098 | did not move | — |
| 20 | 0.196 | 3.31 | 0.146 |
| 30 | 0.294 | 2.19 | 0.335 |
| 40 | 0.392 | 1.75 | 0.523 |
| 50 | 0.490 | 1.50 | 0.712 |
| 60 | 0.588 | 1.33 | 0.900 |
With 10 g on the hanger this cart did not move: 0.098 N of pull is less than the 0.12 N of friction, so static friction held it. Fit the five moving rows and the line has the same slope as Set 1, about 1.92 kg−1, but crosses the force axis near 0.12 N. Friction shifts the line sideways; it does not tilt it. That is the point of the intercept question in the analysis, and it is why the slope, not any single trial, is the quantity that tests Newton’s second law.
Why the tension is not the hanger’s weight
For 50 g on the hanger in Set 1, the mean acceleration is 0.852 m/s2. The hanger’s own equation is mhg − T = mha, so T = 0.050(9.8 − 0.852) = 0.447 N, less than the 0.490 N weight. Treating cart and hanger as one system, as the fit does, never needs T; but if a report says “the string pulled the cart with 0.49 N,” a careful reviewer should catch it.
Your turn
- Recompute the mean and a for the 30 g and 60 g rows of Set 1 and confirm the table.
- Fit Set 1 by hand using the 20 g and 60 g points only. How far is your slope from the least-squares slope, and what does that tell you about using two points?
- Fit Set 2 (five moving rows). Report slope, M and the force-axis intercept, and explain in one sentence why the slopes of the two sets agree while the intercepts do not.
- The Set 1 timer admits to starting the watch a little late on every run. Which way does that push each a, and which way does it push M from the slope? Is that the error that mattered most, or is it the pulley friction? Argue from the numbers.
Sources: NIST, standard acceleration of gravity g_n = 9.80665 m/s^2 (exact) (physics.nist.gov)