
calculate pH from hydrogen-ion concentration, distinguish strong from weak acids with an equilibrium calculation, and explain how a buffer and a neutralization respond to added base.
Instruction
The phenomenon. Missouri’s Department of Natural Resources writes a rule into the state’s water quality standards (10 CSR 20-7.031): water contaminants shall not push a stream’s pH outside the range of 6.5 to 9.0 standard units. Why those two numbers? The U.S. Geological Survey explains that metals such as lead, copper and cadmium dissolve more easily at lower pH, which makes them more toxic, and that at a pH of about 2, the level of some abandoned coal-mine drainage, most aquatic life cannot survive. In a state with more than a century of lead mining and smelting, the acidity of rain, soil and streams is not an abstract idea. This lesson gives you the math behind that rule.
What pH measures. pH = −log[H+], where [H+] is the hydrogen-ion concentration in mol/L. Because the scale is logarithmic, each whole pH unit is a tenfold change in [H+]. USGS gives pH 7 as neutral at 25 °C, so in pure water [H+] = [OH−] = 1.0 × 10−7 M, and the water constant is Kw = [H+][OH−] = 1.0 × 10−14. That means pH + pOH = 14.00.
The Missouri window. The legal range is 2.5 pH units wide, so [H+] at the acidic limit is 102.5 = 316 times [H+] at the basic limit. Normal rain, at about 5.6 because of dissolved carbon dioxide, has [H+] = 10−5.6 = 2.5 × 10−6 M, which is 25.1 times the [H+] of neutral water yet still sits below the legal minimum, a reminder that a standard for streams is not a standard for rain.
Strong and weak acids. A strong acid such as hydrochloric acid ionizes completely, so 0.0010 M HCl has [H+] = 1.0 × 10−3 M and pH = 3.00. A weak acid ionizes only partly, HA ⇌ H+ + A−, with Ka = [H+][A−] ÷ [HA]. For acetic acid the University of Wisconsin tutorial table lists Ka = 1.8 × 10−5.
Worked example: vinegar. Household vinegar is labeled 5% acidity, which we take as 5.0 g of acetic acid (CH3COOH, molar mass 2(12.011) + 4(1.008) + 2(15.999) = 60.052 g/mol) in 100 mL. Concentration: 5.0 g ÷ 60.052 g/mol = 0.0833 mol in 0.100 L, so [HA] = 0.833 M. Let x = [H+] = [A−]. Then x2 ÷ (0.833 − x) = 1.8 × 10−5, and solving gives x = 3.86 × 10−3 M. So pH = −log(3.86 × 10−3) = 2.41, and only 0.46% of the acid molecules have ionized. A strong acid of the same concentration would have pH 0.08, which is why the strength of an acid and its concentration are different ideas.
Buffers and neutralization. A buffer is a weak acid with its conjugate base, such as acetic acid and acetate. The Henderson-Hasselbalch equation, pH = pKa + log([A−] ÷ [HA]), with pKa = 4.74, gives pH 4.74 for equal amounts. Adding 0.0050 mol of NaOH to 1.00 L of a 0.100 M / 0.100 M buffer moves the pH only to 4.79, while the same NaOH in 1.00 L of pure water gives pH 11.70. In a neutralization the acid and base react in a fixed mole ratio: 25.0 mL of the vinegar above (0.0208 mol acid) needs 208 mL of 0.100 M NaOH.
Your questions. Which Missouri waters would you expect to leave the 6.5-9.0 window, and what dissolved substances would explain it? What would you need to measure at a stream to show it? Use this lesson’s reading to write at least two questions you can answer with numbers.
📖 Read for this lesson
The reading opens over the lesson; close it to come back to exactly where you were. The checks below draw on it.
Formative check
Work through these before moving on. They are not graded — they tell you whether the standard below has landed yet.
Missouri’s stream standard allows pH from 6.5 to 9.0. How many times larger is the hydrogen-ion concentration at pH 6.5 than at pH 9.0?
What is the pH of 0.0010 M hydrochloric acid, a strong acid?
The vinegar in the worked example has [HA] = 0.833 M and Ka = 1.8 × 10−5, so its pH is (two decimal places).
Simulation & tools
Measure the pH of liquids
Open the Macro screen. (1) Choose three liquids, record each pH and each [H+] the sim reports, and rank them. (2) Using the data table in this lesson’s reading, pick one liquid in the sim and one Missouri value from the reading (for example normal rain at 5.6 or the 6.5 limit), and calculate how many times larger one [H+] is than the other. (3) Dilute one liquid with water and describe what happens to the pH and why. No device? Use the table of typical pH values in this lesson’s reading and complete step 2 and a written prediction for step 3.
Open in a new tab ↗ · PhET Interactive Simulations, University of Colorado Boulder · CC BY 4.0
How confident are you that you can calculate pH, [H<sup>+</sup>] and the ionization of a weak acid, and explain a buffer?
Practice
Work these on paper or in your notebook, then open Check your answer. Aim for all of Fluency and Application; try at least one Challenge.
Printable version: this unit’s practice workbook (PDF)
Fluency
Build speed and accuracy with the core skill.
- What is the pH of 0.0100 M HCl, a strong acid?
Check your answer
Answer: 2.00[H+] = 0.0100 = 10−2 M, so pH = 2.00. - Calculate [H+] for a stream sample with pH 8.30.
Check your answer
Answer: 5.0 × 10−9 M[H+] = 10−8.30 = 5.0 × 10−9 M. - What is the pH of 0.0025 M NaOH, a strong base? (Kw = 1.0 × 10−14)
Check your answer
Answer: 11.40pOH = −log(0.0025) = 2.60; pH = 14.00 − 2.60 = 11.40. - How many times greater is [H+] at pH 6.5 than at pH 9.0?
Check your answer
Answer: 316 times10(9.0 − 6.5) = 102.5 = 316.
Application
Use the skill in context. Show your reasoning.
- A 0.250 M acetic acid solution (Ka = 1.8 × 10−5) is prepared. Find its [H+], its pH and the percent ionized.
Check your answer
Answer: [H+] = 2.1 × 10−3 M; pH = 2.68; 0.84% ionizedx2 ÷ (0.250 − x) = 1.8 × 10−5 gives x = 2.11 × 10−3 M. pH = −log(x) = 2.68; percent ionized = x ÷ 0.250 × 100 = 0.84%. - A buffer contains 0.200 M acetic acid and 0.100 M acetate (pKa = 4.74). Find its pH.
Check your answer
Answer: 4.44pH = 4.74 + log(0.100 ÷ 0.200) = 4.74 − 0.30 = 4.44. - How many mL of 0.100 M NaOH neutralize 25.0 mL of vinegar with [CH3COOH] = 0.833 M?
Check your answer
Answer: 208 mLMoles acid = 0.0250 L × 0.833 M = 0.0208 mol; 1:1 ratio gives 0.0208 mol NaOH ÷ 0.100 M = 208 mL. - Missouri’s lower pH limit is 6.5. A stream sample reads pH 5.8. How many times greater is its [H+] than at the limit?
Check your answer
Answer: 5.0 times10(6.5 − 5.8) = 100.7 = 5.0.
Challenge
Stretch problems. Expect to think before you write.
- Add 0.0050 mol NaOH to 1.00 L of a buffer that is 0.100 M in acetic acid and 0.100 M in acetate, and to 1.00 L of pure water. Compare the two final pH values.
Check your answer
Answer: Buffer: pH 4.79 (from 4.74); water: pH 11.70Buffer: 0.095 mol HA and 0.105 mol A−, pH = 4.74 + log(0.105 ÷ 0.095) = 4.79. Water: [OH−] = 0.0050 M, pOH = 2.30, pH = 11.70. - 0.10 M HCl has pH 1.00, but 0.10 M acetic acid has pH 2.88. Explain the difference in terms of ionization.
Check your answer
Answer: HCl ionizes completely, so [H+] = 0.10 M. Acetic acid is weak: only about 1.3% of its molecules ionize, so [H+] is about 1.3 × 10−3 M. The same concentration can have very different acidity.
Review
Keep earlier skills sharp.
- How many moles are in 4.5 g of CaCO3?
Check your answer
Answer: 0.045 molDivide by the molar mass, 100.09 g/mol. - How much energy is needed to warm 250 g of water from 22.0 °C to 37.0 °C? (c = 4.184 J/g·°C)
Check your answer
Answer: 15,690 Jq = mcΔT = 250 × 4.184 × 15.0 = 15,690 J. - For N2 + 3H2 ⇌ 2NH3, [N2] = 0.50 M, [H2] = 0.20 M and [NH3] = 0.10 M. Calculate Q.
Check your answer
Answer: 2.5Q = [NH3]2 ÷ ([N2][H2]3) = 0.0100 ÷ (0.50 × 0.0080) = 2.5.
Missouri’s pH Rule, USGS pH Facts and Acid Constants
Missouri 10 CSR 20-7.031 as posted by EPA (July 31, 2023 compilation); USGS Water Science School, pH and Water; NOAA PMEL, A primer on pH; University of Wisconsin chemistry tutorial, pKa table; retrieved 2026-11-15; SLS calculations · Public domain (Missouri rule text, USGS and NOAA facts), with SLS commentary and calculations; acid constants quoted from a university tutorial table
Why this reading. The lesson opens with Missouri’s stream pH rule and a few pH values. This reading gives the exact rule, the USGS facts about pH, a table of hydrogen-ion concentrations, and the acid constants used in the worked examples, so you can check every number and answer the question about two Missouri values.
The Missouri rule
Missouri’s water quality standards are in 10 CSR 20-7.031 of the Code of State Regulations, administered by the Missouri Department of Natural Resources. The U.S. EPA posts the version in effect for Clean Water Act purposes (dated July 31, 2023). Its general criteria for pH say that water contaminants shall not cause the pH to be outside the range of 6.5 to 9.0 standard pH units.
What USGS says about pH
- pH measures how acidic or basic water is, on a scale of 0 to 14 with 7 neutral; it applies to water solutions.
- Each whole pH unit is a tenfold change; USGS states that mine drainage at pH 2 is about 100,000 times more acidic than neutral water.
- Normal rainfall has a pH near 5.6 because of dissolved atmospheric carbon dioxide.
- Metals such as lead, copper and cadmium are generally more soluble, and so more toxic, at lower pH. At a pH of 2, most aquatic life cannot survive.
- Low pH can corrode or dissolve metals in pipes; high pH can encrust pipes and reduce chlorine’s disinfecting effect.
NOAA’s Pacific Marine Environmental Laboratory defines pH = −log[H+].
Table of pH and hydrogen-ion concentration
| Substance or limit | pH | [H+] (mol/L) | Source |
|---|---|---|---|
| Neutral water at 25 °C | 7.0 | 1.0 × 10−7 | USGS |
| Missouri legal minimum (10 CSR 20-7.031) | 6.5 | 3.2 × 10−7 | Missouri rule |
| Missouri legal maximum | 9.0 | 1.0 × 10−9 | Missouri rule |
| Normal rainfall | 5.6 | 2.5 × 10−6 | USGS |
| Abandoned coal-mine drainage (an example) | 2 | 1.0 × 10−2 | USGS |
| Vinegar, 5% acetic acid, 0.833 M (calculated) | 2.41 | 3.86 × 10−3 | SLS calculation |
| 0.0010 M hydrochloric acid (calculated) | 3.00 | 1.0 × 10−3 | SLS calculation |
Check: the ratio of normal rain to neutral water is 25.1, and the ratio of the Missouri limits is 316.
Acid constants used in the lesson
| Acid | Ka | pKa |
|---|---|---|
| Acetic acid | 1.8 × 10−5 | 4.74 |
| Carbonic acid (first) | 4.3 × 10−7 | 6.37 |
| Carbonic acid (second) | 5.6 × 10−11 | 10.25 |
| Ammonium ion | 5.5 × 10−10 | 9.26 |
These values come from the University of Wisconsin general chemistry tutorial table. Other tables give slightly different numbers, for example 1.75 × 10−5 for acetic acid, so your answers may differ in the third figure.
Recorded example: the vinegar calculation
Acetic acid has a molar mass of 60.052 g/mol. A 5.0 g per 100 mL vinegar is 0.0833 mol in 0.100 L, or 0.833 M. Solving x2 ÷ (0.833 − x) = 1.8 × 10−5 gives [H+] = 3.86 × 10−3 M, pH 2.41, and 0.46% ionized.
Sources: Missouri water quality standards, 10 CSR 20-7.031, as posted by EPA (epa.gov); USGS Water Science School: pH and Water (usgs.gov); NOAA PMEL: A primer on pH (pmel.noaa.gov); University of Wisconsin general chemistry tutorial: pKa table (www2.chem.wisc.edu)