
identify hydrocarbons, functional groups and polymers, calculate the energy and mass relationships in ethanol production and combustion, and argue from evidence about a Missouri fuel and plastic recycling.
Instruction
Corn, ethanol and plastic. The Missouri Department of Natural Resources says Missouri ranks 13th in the nation for ethanol production, with plants able to produce 287 million gallons a year, about 1.6 percent of U.S. production, and nearly all gasoline at the pump is E10, 10 percent ethanol. In the same truck stop, drinks come in PET bottles and milk in HDPE jugs. All three are carbon compounds. Is ethanol a better fuel than gasoline, and what does chemistry say about the plastics we recycle?
Hydrocarbons and functional groups. Carbon forms four bonds and bonds to itself, so it makes chains. Alkanes have only single bonds and the formula CnH2n+2: methane CH4, octane C8H18 (a gasoline component). Alkenes have a C=C double bond; ethene, C2H4, is the building block of polyethylene. A functional group is an atom group that sets reactivity: the hydroxyl group (−OH) makes an alcohol such as ethanol, C2H5OH; the −COOH group makes a carboxylic acid; an ester link, −COO−, joins an acid to an alcohol. The −OH group lets ethanol hydrogen bond, so its boiling point is higher than that of a hydrocarbon of similar size.
Worked example: making ethanol. Yeast ferment glucose: C6H12O6 → 2 C2H5OH + 2 CO2. Molar mass of glucose = 6(12.011) + 12(1.008) + 6(15.999) = 180.156 g/mol; ethanol = 46.069 g/mol. From 1.00 kg of glucose (5.55 mol), the theoretical yield is 2 × 5.55 mol × 46.069 g/mol = 511 g of ethanol, about 51 percent of the glucose mass, because the rest leaves as carbon dioxide.
Worked example: energy content. With NIST enthalpies of formation (ethanol −276, CO2 −393.51, H2O(l) −285.83 kJ/mol), burning one mole of ethanol releases 2(393.51) + 3(285.83) − 276 = 1,368.5 kJ, or 29.71 kJ per gram. Octane, using −250.3 kJ/mol, releases 5,470.2 kJ per mole, 47.89 kJ per gram. Ethanol gives 62.0 percent as much energy per gram. Because ethanol is denser than gasoline, the gap per gallon is smaller: the U.S. Department of Energy says about 30 percent less. For E10, using EIA’s 120,214 Btu per gallon for gasoline, E10 carries about 116,608 Btu per gallon, 3.0 percent less.
Polymers. A polymer is a very long molecule built from repeating units (monomers). In addition polymerization, monomers with C=C bonds open the double bond and join, losing nothing: n C2H4 → (C2H4)n. A chain of 1,000 ethene units has molar mass 1,000 × 28.054 = 28,054 g/mol. In condensation polymerization, as in PET (polyethylene terephthalate), an acid and an alcohol join to form ester links and release water. Long, packed chains with strong dispersion forces make plastics tough and light, which is why they are so useful and why they last so long in landfills.
Recycling data. EPA reports that in 2018 the U.S. generated 35,680 thousand tons of plastics; 3,090 thousand tons were recycled (8.7 percent) and 26,970 thousand tons (75.6 percent) were landfilled. The recycling rates for PET bottles and HDPE bottles were 29.1 and 29.3 percent. The number in the triangle on a container is a resin code you can read at home.
Your questions. You will weigh claims about ethanol and plastics with this evidence. Notice where chemistry gives a calculation and where the answer also depends on cost, land and values.
📖 Read for this lesson
The reading opens over the lesson; close it to come back to exactly where you were. The checks below draw on it.
Formative check
Work through these before moving on. They are not graded — they tell you whether the standard below has landed yet.
An alkane has 10 carbon atoms. Its molecular formula is
Using NIST enthalpies of formation, ethanol releases 29.71 kJ per gram and octane 47.89 kJ per gram. Per gram, ethanol releases about
In addition polymerization of ethene, no atoms are lost from the monomers.
Using the data tables in this lesson’s reading, write a claim-evidence-reasoning argument answering: Is E10 a good fuel choice for Missouri, and is recycling the most effective way to reduce plastic waste? Cite at least three numbers from the reading and state one value or cost that chemistry alone cannot settle.
How confident are you that you can identify functional groups and polymers and argue from energy and recycling data about a Missouri fuel?
Practice
Work these on paper or in your notebook, then open Check your answer. Aim for all of Fluency and Application; try at least one Challenge.
Printable version: this unit’s practice workbook (PDF)
Fluency
Build speed and accuracy with the core skill.
- Find the molar mass of ethanol, C2H5OH (C2H6O).
Check your answer
Answer: 46.07 g/mol2(12.011) + 6(1.008) + 15.999. - An alkane has 12 carbon atoms. What is its formula?
Check your answer
Answer: C12H26CnH2n+2 with n = 12. - How many moles of ethene (C2H4, 28.054 g/mol) are in 14.0 kg of polyethylene?
Check your answer
Answer: 499 mol14,000 g ÷ 28.054 g/mol. - In the fermentation of glucose, how many moles of ethanol form from 1.00 mol of glucose?
Check your answer
Answer: 2.00 mol (with 2.00 mol CO2)C6H12O6 → 2 C2H5OH + 2 CO2.
Application
Use the skill in context. Show your reasoning.
- What is the theoretical mass of ethanol from 1.00 kg of glucose? (glucose 180.156 g/mol)
Check your answer
Answer: 511 g1000 ÷ 180.156 = 5.551 mol; × 2 × 46.069 g/mol. - Ethanol releases 29.71 kJ per gram. How much energy is released by burning 1.00 kg?
Check your answer
Answer: 29.7 MJ (29,706 kJ)1000 g × 29.71 kJ/g. - What mass of CO2 forms when 1.00 kg of ethanol burns completely (C2H5OH + 3 O2 → 2 CO2 + 3 H2O)?
Check your answer
Answer: 1.91 kg1000 ÷ 46.069 = 21.71 mol; × 2 × 44.009 g/mol. - EIA lists gasoline as 120,214 Btu/gal. If ethanol has 30% less energy per gallon, what is the energy of E10 (10% ethanol, 90% gasoline by volume) in Btu per gallon, and the percent below gasoline?
Check your answer
Answer: 116,608 Btu/gal; 3.0% less120,214 × (0.90 + 0.10 × 0.70) = 120,214 × 0.97.
Challenge
Stretch problems. Expect to think before you write.
- A polyethylene molecule contains 2,000 ethene units. Find its molar mass.
Check your answer
Answer: 56,108 g/mol2,000 × 28.054. - PET forms from terephthalic acid (166.13 g/mol) and ethylene glycol (62.07 g/mol), releasing 2 H2O per repeat unit (C10H8O4). Find the repeat-unit mass and the mass of water released per 1.000 kg of PET.
Check your answer
Answer: 192.17 g/mol; 187 g of water per kg PET10(12.011) + 8(1.008) + 4(15.999) = 192.17; water = 2 × 18.015 ÷ 192.17 = 0.1875 of the mass. - EPA reports 2018 U.S. plastics: generation 35,680, recycled 3,090 and landfilled 26,970 thousand tons. Calculate the percent recycled and percent landfilled.
Check your answer
Answer: 8.7% recycled; 75.6% landfilled3,090 ÷ 35,680 and 26,970 ÷ 35,680.
Review
Keep earlier skills sharp.
- How many moles are in 36.0 g of CO2?
Check your answer
Answer: 0.818 molDivide by the molar mass, 44.01 g/mol. - A gas occupies 12 L at 200 kPa. At constant temperature, what volume does it occupy at 300 kPa?
Check your answer
Answer: 8.00 LBoyle’s law: P1V1 = P2V2. - Use NIST enthalpies of formation (CH4 −74.6, CO2 −393.51, H2O(l) −285.83 kJ/mol) to find ΔH for CH4 + 2 O2 → CO2 + 2 H2O(l).
Check your answer
Answer: −890.57 kJ/mol (exothermic)ΔH = [−393.51 + 2(−285.83)] − [−74.6] = −890.57 kJ. - What volume does 1.00 mol of an ideal gas occupy at 298 K and 1.00 atm? (R = 0.08206 L atm/(mol K))
Check your answer
Answer: 24.5 LV = nRT/P = 0.08206 × 298 ÷ 1.00.
Missouri Ethanol, Fuel Energy and U.S. Plastics Data
MDNR Biofuels page; AFDC Ethanol Fuel Basics; EIA British thermal units page; EPA Plastics: Material-Specific Data; NIST Chemistry WebBook, all retrieved 2026-11-15; SLS calculations · Public domain (MDNR, DOE, EIA, EPA, NIST data), with SLS commentary
Why this reading. Lesson 4.3 asks whether corn ethanol is a good motor fuel and what chemistry says about plastics and recycling. This reading collects the Missouri and national data, and the thermochemistry you need, from public sources.
Ethanol in Missouri
The Missouri Department of Natural Resources (MDNR) says Missouri ranks 13th in the nation for ethanol production. Citing the Renewable Fuels Association’s 2021 Ethanol Industry Outlook, MDNR reports that Missouri’s ethanol plants can produce 287 million gallons each year, roughly 1.6 percent of total annual U.S. production of 17.4 billion gallons. E10 is 10 percent ethanol and 90 percent gasoline. The U.S. Department of Energy’s Alternative Fuels Data Center (AFDC) says about 94 percent of U.S. ethanol is made from corn starch, and that denatured ethanol (98 percent ethanol) contains about 30 percent less energy than gasoline per gallon. EIA lists the heat content of motor gasoline as 120,214 Btu per gallon.
Check (SLS calculation): 287 ÷ 17,400 = 1.65 percent. Energy of E10 using 70 percent for the ethanol part: 120,214 × (0.90 + 0.10 × 0.70) = 116,608 Btu per gallon, 3.0 percent below gasoline.
Thermochemistry from NIST
| Substance | State | Enthalpy of formation (kJ/mol) |
|---|---|---|
| Carbon dioxide | gas | −393.51 |
| Water | liquid | −285.83 |
| Methane | gas | −74.6 |
| Ethanol, C2H5OH | liquid | −276 (± 2) |
| n-Octane, C8H18 | liquid | −250.3 |
Source: NIST Chemistry WebBook. Combustion enthalpies by Hess’s law (SLS calculation, complete combustion to CO2(g) and H2O(l)):
| Fuel | Released per mole (kJ) | Molar mass (g/mol) | Released per gram (kJ/g) |
|---|---|---|---|
| Ethanol | 1,368.5 | 46.069 | 29.71 |
| n-Octane (a gasoline component) | 5,470.2 | 114.232 | 47.89 |
| Methane | 890.57 | 16.043 | 55.51 |
Ethanol releases 62.0 percent as much energy per gram as octane. Density matters for per-gallon comparisons: using illustrative densities of 0.789 g/mL for ethanol and 0.703 g/mL for octane (check these in a handbook), ethanol releases 69.6 percent as much per volume, which agrees with AFDC’s “about 30 percent less.”
Making ethanol and polymers: formulas
Fermentation: C6H12O6 → 2 C2H5OH + 2 CO2. Addition polymerization of ethene: n C2H4 → (C2H4)n, polyethylene. PET is a condensation polymer of terephthalic acid and ethylene glycol; one repeat unit is C10H8O4, and each ester link releases one water molecule. AFDC notes that corn ethanol has a positive energy balance (the fuel contains more energy than the process uses).
Plastics in the U.S. (EPA, 2018 data)
| Management pathway | Thousand U.S. tons, 2018 |
|---|---|
| Generation | 35,680 |
| Recycled | 3,090 |
| Combustion with energy recovery | 5,620 |
| Landfilled | 26,970 |
EPA says plastics were 12.2 percent of municipal solid waste generation, the recycling rate was 8.7 percent, and the recycling rates for PET bottles and jars and HDPE natural bottles were 29.1 and 29.3 percent. Check (SLS calculation): 3,090 ÷ 35,680 = 8.7 percent recycled; 26,970 ÷ 35,680 = 75.6 percent landfilled; 5,620 ÷ 35,680 = 15.8 percent burned for energy. EPA also lists lead-acid battery casings among plastic durable goods.
Resin identification codes are the numbers inside the recycling triangle on a container. Check a few bottles at home: you should find that PET and HDPE are the codes most often printed on drink and milk bottles.
Sources: MDNR: Biofuels (dnr.mo.gov); AFDC: Ethanol Fuel Basics (afdc.energy.gov); EIA: British thermal units (Btu) (eia.gov); EPA: Plastics Material-Specific Data (epa.gov); NIST Chemistry WebBook: Ethanol (webbook.nist.gov); NIST Chemistry WebBook: n-Octane (webbook.nist.gov); NIST Chemistry WebBook: Methane (webbook.nist.gov)