
calculate reaction enthalpies with Hess’s law and NIST formation enthalpies in a spreadsheet-style model, and argue from the model and measured values which fuel gives the most energy per gram and per CO2 released.
Instruction
The phenomenon. Missouri’s power plants burn coal and natural gas, and vehicles burn gasoline. A plant operator, a driver and a rocket engineer all ask the same question: how much energy does a fuel give, and how much carbon dioxide comes with it? You can compute the answer from published thermochemical data without burning anything, and then check it against measured values.
Enthalpy of formation. The standard enthalpy of formation, ΔfH°, is the energy change when one mole of a compound forms from its elements in their standard states at 298.15 K. Elements in their standard states, such as O2(g), H2(g) and graphite, have ΔfH° = 0. The NIST Chemistry WebBook and NIST-JANAF tables list thousands of these values, which is why they are the backbone of a computational energy model.
Hess’s law. Enthalpy is a state function: the total ΔH between reactants and products does not depend on the path. So if one reaction can be built from steps, its ΔH is the sum of the steps. Carbon burning to CO has ΔH = −110.53 kJ and to CO2 has −393.51 kJ, so the step CO + ½O2 → CO2 must release −393.51 − (−110.53) = −282.98 kJ. The general formula is ΔrH = ΣnΔfH(products) − ΣnΔfH(reactants).
Worked example: propane. Propane is a common gas fuel. C3H8(g) + 5O2(g) → 3CO2(g) + 4H2O(l). Products: 3(−393.51) + 4(−285.83) = −2,323.85 kJ. Reactants: 1(−104.7) + 5(0) = −104.7 kJ. ΔcH = −2,323.85 − (−104.7) = −2,219.15 kJ per mole, which rounds to −2,219.2 kJ at the 0.1 kJ precision of the propane value. NIST also lists measured combustion enthalpies of −2,219.2 and −2,219.9 kJ/mol, so the calculation lands on the measurements. Dividing by the molar mass, 2,219.15 ÷ 44.0956 = 50.33 kJ per gram, and dividing by the 3 mol of CO2 formed gives 739.7 kJ per mole of CO2.
A spreadsheet model. Build the calculation as a model, not a one-off: put species and ΔfH° values in two columns, put coefficients (products positive, reactants negative) in a third, and use a sum-product formula. Add columns for molar mass, kJ per gram and kJ per mole of CO2. Then test the model: change liquid water to gas water and watch the result move by 44.004 kJ for every mole of water, because −241.826 − (−285.830) = 44.004 kJ is the energy to vaporize a mole of water. For methane this is the difference between −890.57 kJ and −802.56 kJ per mole.
What the model predicts. Per gram, hydrogen releases 141.8 kJ, methane 55.5, propane 50.3, octane (a gasoline component) 47.9 and ethanol 29.7 kJ. Ethanol carries only about 62 percent of the energy per gram that octane does, because its molecules already contain oxygen. Per mole of CO2 produced, methane gives 891 kJ, octane 684 kJ: methane delivers more energy for each CO2 released.
Your questions. What does a computational model leave out? List two things the sum-product table cannot tell you about a real engine or furnace, and start the next lesson with the one you most want to check.
📖 Read for this lesson
The reading opens over the lesson; close it to come back to exactly where you were. The checks below draw on it.
Formative check
Work through these before moving on. They are not graded — they tell you whether the standard below has landed yet.
Which of these fuels releases the most energy per gram when burned completely: hydrogen, methane, octane or ethanol?
Using ΔfH° values of −74.6 (CH4), −393.51 (CO2) and −285.83 (H2O(l)) kJ/mol, the combustion enthalpy of methane is kJ/mol (nearest 0.1).
C + ½O2 → CO has ΔH = −110.53 kJ and C + O2 → CO2 has ΔH = −393.51 kJ. For 2CO + O2 → 2CO2, ΔH is
Using the NIST formation enthalpies in this lesson’s reading, build your own table or spreadsheet for ethanol and octane (liquid water as product). Show the products-minus-reactants calculation for each, convert to kJ per gram and kJ per mole of CO2, and check your answers against the finished fuel table in the reading. Then write a three-sentence argument: a claim about which fuel is better on each measure, your evidence, and your reasoning, including what the model does not account for.
How confident are you that you can calculate reaction enthalpies with Hess’s law and compare fuels in a computational model?
Practice
Work these on paper or in your notebook, then open Check your answer. Aim for all of Fluency and Application; try at least one Challenge.
Printable version: this unit’s practice workbook (PDF)
Fluency
Build speed and accuracy with the core skill.
- The NIST formation enthalpy of H2O(l) is −285.830 kJ/mol. What is ΔH for H2 + ½O2 → H2O(l)? For 2H2O(l) → 2H2 + O2?
Check your answer
Answer: −285.830 kJ; +571.660 kJThe first equation is the formation reaction. The second is twice the reverse, so the sign flips and the amount doubles. - Why is ΔfH° of O2(g) equal to zero?
Check your answer
Answer: It is an element in its standard state: forming it from itself involves no change. - Use ΔfH° of CO2 (−393.51) and CO (−110.53) kJ/mol to find ΔH for CO + ½O2 → CO2.
Check your answer
Answer: −282.98 kJ-393.51 − (-110.53) = -282.98. - Methane releases 890.57 kJ per mole (liquid water). With a molar mass of 16.0425 g/mol, what is the energy per gram?
Check your answer
Answer: 55.5 kJ/g890.57 ÷ 16.0425 = 55.51.
Application
Use the skill in context. Show your reasoning.
- Calculate the combustion enthalpy of liquid ethanol, C2H5OH(l) + 3O2 → 2CO2 + 3H2O(l), using ΔfH° = −276.0 kJ/mol for ethanol (±2).
Check your answer
Answer: −1,368.5 kJ/mol (uncertain by about 2 kJ)2(−393.51) + 3(−285.83) = −1,644.51; minus (−276.0) = −1,368.51 kJ. - Find the energy per gram and per mole of CO2 for octane, C8H18 (ΔcH = −5,470.55 kJ/mol, 114.2285 g/mol).
Check your answer
Answer: 47.9 kJ/g; 683.8 kJ per mole of CO25,470.55 ÷ 114.2285 = 47.89; 8 CO2 formed: 5,470.55 ÷ 8 = 683.8. - Burning methane to give gaseous water releases 802.56 kJ/mol; to give liquid water, 890.57. Find the difference and explain it.
Check your answer
Answer: 88.01 kJ per mole of methane, which is 2 × 44.00 kJ890.57 − 802.56 = 88.01. Two moles of water condense, each giving back 44.004 kJ. - How many grams of CO2 are produced per megajoule (1,000 kJ) of energy released by methane and by octane (liquid water)? (CO2 = 44.0095 g/mol)
Check your answer
Answer: Methane 49.4 g; octane 64.4 gMethane: 1000 ÷ 890.57 = 1.1229 mol, × 1 × 44.0095 = 49.4 g. Octane: 1000 ÷ 5,470.55 = 0.18280 mol, × 8 × 44.0095 = 64.4 g.
Challenge
Stretch problems. Expect to think before you write.
- Burning carbon to CO releases −110.53 kJ per mole and burning it all the way to CO2 releases −393.51 kJ. What percent of the full energy is released in the first step, and where is the rest?
Check your answer
Answer: 28.1 percent in the first step; the other 71.9 percent (282.98 kJ) is released when CO burns to CO2110.53 ÷ 393.51 = 28.1%; the remaining 71.9% is 282.98 kJ. - Using ΔfH°(NH3) = −45.94 kJ/mol, calculate ΔH for N2 + 3H2 → 2NH3 and classify it. Why can a table of formation enthalpies give this value although you never measured the reaction itself?
Check your answer
Answer: −91.88 kJ, exothermic. Hess’s law: enthalpy is a state function, so the formation values built from the elements give the reaction’s ΔH whatever the path.2 × (−45.94) − (0 + 0) = −91.88 kJ.
Review
Keep earlier skills sharp.
- What mass of CO2 forms from 100.0 g of propane? C3H8 + 5O2 → 3CO2 + 4H2O (44.0956 and 44.0095 g/mol)
Check your answer
Answer: 299.4 g100.0 ÷ 44.0956 = 2.268 mol; × 3 = 6.803 mol CO2; × 44.0095 = 299.4 g. - How many moles are in 46.07 g of ethanol (molar mass 46.0684 g/mol)?
Check your answer
Answer: 1.000 mol46.07 ÷ 46.0684 = 1.000. - What volume of CO2 gas, at 25.0 °C and 101,325 Pa, forms from 1.00 mol of propane burned completely? (R = 8.314 J/(mol·K))
Check your answer
Answer: 73.4 L3.00 mol × 8.314 × 298.15 ÷ 101,325 = 73.4 L.
NIST Formation Enthalpies, Hess’s Law and a Fuel Comparison
NIST Chemistry WebBook thermochemistry pages for carbon monoxide, carbon dioxide, water, methane, propane, ethanol and octane, retrieved 2026-11-15. Derived reaction enthalpies and per-gram values are SLS calculations recomputed with Python. · Public domain (NIST data), with SLS commentary and calculations
Why this reading. It is the data table for your enthalpy model: NIST formation enthalpies, a Hess’s-law worked example, and the finished fuel comparison so you can check your spreadsheet. All derived numbers were recomputed with Python from the NIST values below.
Standard enthalpies of formation (298.15 K)
These are from the NIST Chemistry WebBook (the gas or liquid page for each species). An element in its standard state has ΔfH° = 0. For ethanol and octane the WebBook lists several measurements; the values here are the WebBook average for ethanol (−276, with an uncertainty of ±2) and the Prosen measurement for octane (−250.0 ± 0.84).
| Species | ΔfH° (kJ/mol) |
|---|---|
| C(graphite) | 0 |
| H2(g) | 0 |
| O2(g) | 0 |
| CO(g) | −110.53 |
| CO2(g) | −393.51 |
| H2O(g) | −241.826 |
| H2O(l) | −285.830 |
| CH4(g) | −74.6 |
| C3H8(g) | −104.7 |
| C2H5OH(l) | −276 |
| C8H18(l), octane | −250.0 |
Hess’s law in two steps
Carbon monoxide: C + ½O2 → CO has ΔH = −110.53 kJ. The full burn C + O2 → CO2 has ΔH = −393.51 kJ. The second step, CO + ½O2 → CO2, is the difference: −393.51 − (−110.53) = −282.98 kJ. Energy depends only on the starting and ending states, not the path.
Combustion enthalpies by the formation method
ΔrH = ΣnΔfH(products) − ΣnΔfH(reactants), with liquid water as the product. For propane: 3(−393.51) + 4(−285.83) − (−104.7) = −2,219.15 kJ per mole. NIST’s own measured combustion enthalpies for gaseous propane include −2219.2 and −2219.9 kJ/mol, and for methane −890.7 and −890.35 kJ/mol (several measurements are listed), so your calculated values should agree within a few kJ. For liquid ethanol NIST lists measured values near −1367 kJ/mol; the formation calculation gives −1,368.5.
The finished fuel table (liquid water produced)
| Fuel | Molar mass (g/mol) | ΔcH (kJ/mol) | Energy per gram (kJ/g) | Energy per mole CO2 (kJ/mol) |
|---|---|---|---|---|
| Methane, CH4(g) | 16.04 | −890.6 | 55.5 | 891 |
| Propane, C3H8(g) | 44.10 | −2,219.2 | 50.3 | 740 |
| Ethanol, C2H5OH(l) | 46.07 | −1,368.5 | 29.7 | 684 |
| Octane, C8H18(l) | 114.23 | −5,470.5 | 47.9 | 684 |
| Hydrogen, H2(g) | 2.02 | −285.8 | 141.8 | 0 (no CO2) |
The last column divides the energy released by the moles of CO2 formed. A higher number means more energy for each CO2 released.
A spreadsheet layout
Put the species in column A and ΔfH° in column B. For each reaction add a column of coefficients (products positive, reactants negative), then multiply with a sum-product formula: ΔrH = SUMPRODUCT(coefficients, column B). Divide by the fuel’s molar mass for kJ/g. Changing one input, such as liquid versus gas water, should change every dependent cell. Using gas water instead of liquid changes each reaction by 44.004 kJ per mole of water formed, the energy to vaporize one mole.
Sources: NIST WebBook: methane (webbook.nist.gov); NIST WebBook: propane (webbook.nist.gov); NIST WebBook: ethanol (webbook.nist.gov); NIST WebBook: octane (webbook.nist.gov); NIST WebBook: carbon monoxide (webbook.nist.gov); NIST WebBook: carbon dioxide (webbook.nist.gov); NIST WebBook: water (webbook.nist.gov)