
predict how changes in concentration, pressure, temperature and catalyst affect an equilibrium and its rate, using Q and K, and use data to refine the conditions of a chemical process.
Instruction
The Missouri question. The U.S. Geological Survey lists Missouri among the four leading lime-producing states and, in the same series, as the second leading cement-producing state. Both industries cook limestone in a kiln: CaCO3(s) ⇌ CaO(s) + CO2(g). Meanwhile the country makes about 14 million metric tons of ammonia a year, mostly for fertilizer. The question for this lesson is how a chemical engineer picks temperature, pressure and catalyst so the reaction goes the way the plant needs.
Le Chatelier’s principle. When a system at equilibrium is disturbed, it shifts in the direction that partly undoes the disturbance. The reliable way to use it is through Q and K. Adding reactant or removing product makes Q < K, so the system shifts forward. Compressing a gas mixture raises every partial pressure, and the shift favors the side with fewer moles of gas. Raising the temperature is different: it changes K itself. For an endothermic reaction K rises with temperature; for an exothermic reaction K falls. A catalyst speeds up the forward and reverse reactions equally, so it brings the system to equilibrium faster but never changes K or the final amounts.
Ammonia. N2(g) + 3 H2(g) ⇌ 2 NH3(g) has ΔH° = -91.88 kJ, so it is exothermic, and four moles of gas become two. Low temperature and high pressure both favor ammonia. But low temperature means a slow reaction (Lesson 2.1), so plants run a compromise: a catalyst bed near 450 °C, pressures of about 100 to 200 bar, cooling to about −25 °C to condense the ammonia, and recycling the unreacted gas (OSTI paper in this lesson’s reading). The fitted equilibrium constant falls from 6.67 × 10−4 bar−2 at 350 °C to 5.69 × 10−6 bar−2 at 550 °C.
Worked example 1: compression. At 450 °C, K = 4.43 × 10−5 bar−2. Take an equilibrium mixture with P(N2) = 40.0 bar and P(H2) = 120. bar. Then P(NH3) = √(K × 40.0 × 120.3) = 55.3 bar. Now squeeze the gas to half the volume, which doubles every partial pressure. Q = (2 × 55.3)2 ÷ [(2 × 40.0)(2 × 120.)3] = 1.11 × 10−5, and Q ÷ K = 0.2500. Because Q is one-quarter of K, the system shifts forward and makes more NH3.
Worked example 2: the lime kiln. For CaCO3(s) ⇌ CaO(s) + CO2(g), K = P(CO2) in bar, because the solids are left out. The tabulated equilibrium pressure is 24 kPa at 800 °C (K = 0.24) and 101 kPa at 898 °C (K = 1.01); the reaction is endothermic (a fit to the tabulated points gives ΔH ≈ 175 kJ/mol). Therefore the kiln needs a high temperature, and also a way to keep the CO2 pressure below the equilibrium value, for example by sweeping gas through. Using the fit, a kiln that keeps P(CO2) at 0.20 bar needs about 797 °C, while 0.10 bar needs about 760 °C. That is why removing product saves fuel.
Design trade-offs. Every change has a cost. Higher pressure gives more ammonia at equilibrium but needs stronger equipment and more compressor energy. Higher temperature gives a faster reaction but a smaller equilibrium yield. A catalyst helps only the speed. A good design states its criteria first and then shows how each choice meets them.
Your questions. For any proposed change, decide whether it changes Q (concentration, pressure, volume), K (temperature) or only the speed (catalyst). Use this lesson’s reading for the data tables.
📖 Read for this lesson
The reading opens over the lesson; close it to come back to exactly where you were. The checks below draw on it.
Formative check
Work through these before moving on. They are not graded — they tell you whether the standard below has landed yet.
For N2 + 3 H2 ⇌ 2 NH3 (exothermic), raising the temperature at fixed pressure will
Simulation & tools
Pressure and collisions
Open the Ideal screen, add a few hundred heavy and light particles, and keep the temperature constant. (1) Reduce the container width to halve the volume and record how the pressure and the number of collisions with the wall change. (2) Explain, in terms of collision frequency, why compression raises the rate of a gas reaction. (3) Then explain why compression also shifts an equilibrium toward the side with fewer gas molecules. No device? Use the data given in this lesson’s reading: at 450 °C the model gives 15.5% NH3 at 100 bar and 24.6% at 200 bar. Explain this increase with Le Chatelier’s principle.
Open in a new tab ↗ · PhET Interactive Simulations, University of Colorado Boulder · CC BY 4.0
An ammonia mixture at equilibrium at 450 °C is compressed to half its volume (all partial pressures double). The value of Q/K is 0.25. The system will
Using the ammonia fit table and the CaCO3 table in this lesson’s reading, (a) explain why plants run ammonia reactors near 450 °C even though K is larger at 350 °C (6.67 × 10−4 against 4.43 × 10−5 bar−2), and (b) calculate K for the kiln at 898 °C (101 kPa ÷ 100 kPa) and say what happens to the temperature needed if the CO2 pressure is kept low.
How confident are you that you can predict the effect of concentration, pressure, temperature and a catalyst on an equilibrium and its rate?
Practice
Work these on paper or in your notebook, then open Check your answer. Aim for all of Fluency and Application; try at least one Challenge.
Printable version: this unit’s practice workbook (PDF)
Fluency
Build speed and accuracy with the core skill.
- For N2 + 3 H2 ⇌ 2 NH3 (ΔH = −91.88 kJ), which way does the equilibrium shift if the temperature rises, and what happens to K?
Check your answer
Answer: It shifts toward N2 and H2 (backward); K decreases. - For 2 SO2 + O2 ⇌ 2 SO3, which way does an increase in pressure shift the equilibrium?
Check your answer
Answer: Toward SO3 (forward), the side with fewer gas moles (2 versus 3). - Does a catalyst change the value of K? Does it change the time to reach equilibrium?
Check your answer
Answer: It does not change K. It shortens the time to reach equilibrium. - In the lime kiln CaCO3(s) ⇌ CaO(s) + CO2(g), what happens to the equilibrium when CO2 is removed continuously?
Check your answer
Answer: It shifts forward, making more CaO and CO2.
Application
Use the skill in context. Show your reasoning.
- Using K = 2.03 × 10−12 exp(101,600 ÷ (8.314 T)), calculate K for ammonia synthesis at 400 °C (673.15 K).
Check your answer
Answer: 1.55 × 10−4 bar−2exp(101,600 ÷ (8.314 × 673.15)) = 7.659e+07; × 2.03 × 10−12 = 1.55 × 10−4. - Find the ratio K(350 °C) ÷ K(550 °C) for ammonia synthesis (6.67 × 10−4 and 5.69 × 10−6 bar−2).
Check your answer
Answer: 117.36.6723e-04 ÷ 5.6880e-06 = 117.3. - Ammonia synthesis releases 91.88 kJ for each 2 mol of NH3 formed. How much energy is released when 10.0 mol of NH3 forms?
Check your answer
Answer: 459.4 kJ10.0 mol ÷ 2 mol = 5.00 reaction units; 5.00 × 91.88 kJ = 459.4 kJ. - An N2O4/NO2 mixture at equilibrium at 298.15 K has P(N2O4) = 0.825 bar and P(NO2) = 0.350 bar. The volume is halved (all pressures double). Calculate Q and the direction of shift. (Kp = 0.148)
Check your answer
Answer: Q = 0.296; backwardQ = (2 × 0.350)2 ÷ (2 × 0.825) = 0.296 > 0.148, which is twice K. It shifts backward, to the side with fewer gas moles (1 versus 2).
Challenge
Stretch problems. Expect to think before you write.
- At 450 °C (4.43 × 10−5 bar−2), an equilibrium mixture has P(N2) = 40.0 bar and P(H2) = 120. bar. Calculate P(NH3). Then halve the volume and show that Q is one-quarter of K.
Check your answer
Answer: P(NH3) = 55.3 bar; Q ÷ K = 0.25P(NH3) = √(K × 40.0 × 120.3) = √(3063.0) = 55.3 bar. Doubling all pressures multiplies the numerator of Q by 22 and the denominator by 24, so Q = K ÷ 4 and the system shifts forward. - For CaCO3(s) ⇌ CaO(s) + CO2(g), the fit to the tabulated points gives ΔH = 175 kJ/mol and ln K = 18.036 − (174,723/8.314)/T. Find the temperature at which the equilibrium CO2 pressure is 0.20 bar.
Check your answer
Answer: 797 °Cln 0.20 = -1.609; 1/T = (18.036 − (-1.609)) ÷ (174,723/8.314) gives T = 1070 K = 797 °C. - A designer proposes raising the ammonia reactor pressure from 100 bar to 300 bar and lowering the temperature from 450 °C to 350 °C. Using the table (15.5% NH3 at 450 °C and 100 bar; 53.8% at 350 °C and 300 bar), explain what improves, what gets worse and what the designer must check.
Check your answer
Answer: The equilibrium yield rises from 15.5% to 53.8% because the reaction is exothermic and four moles of gas become two. The rate falls (rate index 1.00 at 350 °C versus 8.46 at 450 °C) and the pressure demands stronger, costlier equipment and more compressor energy, so the designer must check that the catalyst is fast enough at 350 °C and that the equipment can safely hold 300 bar.
Review
Keep earlier skills sharp.
- How many grams of NH3 (17.03 g/mol) are in 8.00 mol?
Check your answer
Answer: 136.2 g8.00 × 17.03 = 136.2 g. - How many moles of N2 are needed to make 6.00 mol NH3 (N2 + 3 H2 → 2 NH3)?
Check your answer
Answer: 3.00 mol6.00 mol NH3 × (1 mol N2 ÷ 2 mol NH3) = 3.00 mol. - A gas at 2.00 atm and 300. K in a 5.00 L vessel is heated to 450. K at constant volume. What is the new pressure?
Check your answer
Answer: 3.00 atmP2 = P1T2/T1 = 2.00 × 450. ÷ 300. = 3.00 atm.
Ammonia, Lime and Cement: Industry Facts and Equilibrium Data
USGS Mineral Commodity Summaries 2026 (Lime, Cement, Nitrogen); NIST Chemistry WebBook (NH3, N2, H2, CO2); Zhang, Way and Wolden, catalytic membrane reactors for ammonia synthesis, hosted at osti.gov/servlets/purl/1779196; CRC equilibrium CO2 pressure table as reproduced on Wikipedia ‘Calcium carbonate’; all retrieved 2026-11-15; SLS calculations · Public domain (USGS and NIST data; facts from a U.S. Department of Energy hosted paper paraphrased), with SLS commentary and calculations
Why this reading. It collects the industry facts and equilibrium data you need to apply Le Chatelier’s principle to two real processes, ammonia synthesis and the lime kiln that Missouri’s limestone makes possible.
Missouri and the lime and cement industries
The U.S. Geological Survey’s Mineral Commodity Summaries 2026 reports that about 15 million tons of quicklime and hydrated lime were made in the United States in 2025, at 70 primary lime plants (plants operating quicklime kilns) in 30 states. Missouri is one of the four leading lime-producing states, with Alabama, Ohio and Texas. For cement, the same series ranks Texas first and Missouri second, in descending order of output, among the four leading cement-producing states; the four together made about 44% of the U.S. total, from 97 plants in 34 states.
U.S. ammonia
USGS reports that ammonia was produced by 18 companies at 38 plants in 19 states in 2025, about 14,000 thousand metric tons measured as nitrogen. About 57% of capacity was in Louisiana, Oklahoma and Texas because of their large natural-gas reserves, the dominant feedstock. Approximately 88% of U.S. ammonia production was for fertilizer use, and the plants that were operating ran at about 80% of rated capacity.
A 2021 reactor-modeling paper from the Colorado School of Mines, hosted by the U.S. Department of Energy’s OSTI, describes the conventional process this way: conversion approaches the equilibrium limit in a packed-bed reactor at roughly 450 °C, and reactor pressures are about 100 to 200 bar to push the equilibrium toward ammonia. The effluent is cooled to about −25 °C to condense the ammonia, and the unreacted nitrogen and hydrogen are recompressed, reheated and recycled to the reactor. The paper notes that a century of work has aimed at catalysts that work at lower temperature, which would ease the thermodynamic limit.
Ammonia equilibrium numbers
From NIST data at 298.15 K, ΔfH°(NH3) = −45.94 kJ/mol and S° = 192.77 (NH3), 191.609 (N2) and 130.680 (H2) J/(mol·K). For N2 + 3 H2 ⇌ 2 NH3 that gives ΔH° = -91.88 kJ and ΔS° = -198.1 J/K (SLS calculation), so Kp at 298 K is about 5.6 × 105 bar−2. If you assume ΔH° and ΔS° stay constant, the same method gives 1.9 × 10−4 bar−2 at 723.15 K. That assumption is too rough at plant temperatures, so the table below uses the equilibrium-constant fit published in the OSTI paper, K = 2.03 × 10−12 exp(101,600 J/mol ÷ RT), in bar−2. At 450 °C the fit gives 4.43 × 10−5.
| °C | T (K) | K for N2 + 3 H2 ⇌ 2 NH3 (bar−2) |
|---|---|---|
| 350 | 623.15 | 6.67 × 10−4 |
| 400 | 673.15 | 1.55 × 10−4 |
| 450 | 723.15 | 4.43 × 10−5 |
| 500 | 773.15 | 1.49 × 10−5 |
| 550 | 823.15 | 5.69 × 10−6 |
Equilibrium CO2 over limestone
For CaCO3(s) ⇌ CaO(s) + CO2(g), the equilibrium constant is K = P(CO2) ÷ 100 kPa, because the two solids are left out. The measured equilibrium pressure of CO2 over CaCO3 at several temperatures is tabulated in the CRC Handbook of Chemistry and Physics; the values here are as reproduced on Wikipedia (a last-resort source; labeled) and are used for practice.
| °C | T (K) | P(CO2) (kPa) | K (bar) |
|---|---|---|---|
| 550 | 823.15 | 0.055 | 0.00055 |
| 727 | 1000.15 | 5.9 | 0.059 |
| 800 | 1073.15 | 24 | 0.24 |
| 852 | 1125.15 | 51 | 0.51 |
| 898 | 1171.15 | 101 | 1.01 |
| 937 | 1210.15 | 179 | 1.79 |
| 1082 | 1355.15 | 901 | 9.01 |
A straight line through ln K against 1/T for the points from 550 °C to 898 °C gives ΔH ≈ 175 kJ/mol (SLS calculation); Wikipedia quotes 178 kJ/mol for the calcination.
Questions to answer
- Why can the kiln make quicklime only when the CO2 pressure it sees is below the equilibrium value?
- Why does a lower temperature give more ammonia at equilibrium, and why do plants run hot anyway?
Sources: USGS Mineral Commodity Summaries 2026: Lime (pubs.usgs.gov); USGS Mineral Commodity Summaries 2026: Cement (pubs.usgs.gov); USGS Mineral Commodity Summaries 2026: Nitrogen (Fixed), Ammonia (pubs.usgs.gov); Zhang, Way, Wolden: Design and Operational Considerations of Catalytic Membrane Reactors for Ammonia Synthesis (OSTI) (osti.gov); NIST WebBook: Ammonia (webbook.nist.gov); Wikipedia: Calcium carbonate (CRC equilibrium table; last-resort source) (en.wikipedia.org)