THE VR SCHOOL
  • Schools & Districts
    • License the academy
    • Free program for your students
    • Request a demo
  • Catalog
    • AI & Data
    • Cybersecurity & Web
    • Programming
    • Health Science
    • All Guilds
    • All courses
  • Families
  • Accreditation
  • Log In
  • Request a demo
  • Home
  • Courses

RLP Chemistry B — Energy, Equilibrium, Earth Systems and Nuclear Chemistry

Curriculum

  • 4 Sections
  • 20 Lessons
  • 10 Weeks
Expand all sectionsCollapse all sections
  • Unit 1: Thermochemistry and Energy Transfer
    5
    • 1.1
      Where the Energy Comes From: Bonds, Burning and Missouri’s Power
      50 mins
    • 1.2
      Calorimetry: Measuring Energy Transfer at Home
      100 mins
    • 1.3
      Hess’s Law and Fuel Energy with NIST Data
      50 mins
    • 1.4
      Energy Conversion Devices and Efficiency
      50 mins
    • 1.5
      Performance Task: The Steel-Wool Warmer
      200 mins
  • Unit 2: Reaction Rates, Equilibrium and Designing Chemical Systems
    5
    • 2.1
      Why Warm Food Spoils Faster: Collision Theory and Reaction Rate
      100 mins
    • 2.2
      Measuring Reaction Rate: Temperature and Concentration
      100 mins
    • 2.3
      Dynamic Equilibrium, K and Q: From Missouri Caves to ICE Tables
      100 mins
    • 2.4
      Le Chatelier and Industrial Design: Ammonia and the Lime Kiln
      100 mins
    • 2.5
      Performance Task: Refine a Chemical System
      150 mins
  • Unit 3: Acids and Bases, Redox, Water and the Carbon Cycle
    5
    • 3.1
      Why Missouri Streams Must Stay Between pH 6.5 and 9.0
      50 mins
    • 3.2
      Redox in a Lemon and in a Car Battery
      100 mins
    • 3.3
      Big Spring: Water, Carbonate Rock and Hardness
      50 mins
    • 3.4
      Carbon in the Air, the Ocean and the Infrared
      50 mins
    • 3.5
      Performance Task: Missouri Climate and Carbon Forecast Brief
      200 mins
  • Unit 4: Nuclear Chemistry, Carbon Materials and Engineering Design
    5
    • 4.1
      Two Missouri Reactors: Decay, Half-Life and Binding Energy
      50 mins
    • 4.2
      Modeling Decay: Half-Life Lab and the St. Louis Record
      100 mins
    • 4.3
      Carbon Chains: Ethanol Fuel, Polymers and Plastic Waste
      100 mins
    • 4.4
      Lead for Batteries: Mining, Recycling and a Decision Model
      100 mins
    • 4.5
      Capstone: Missouri Evening Power
      150 mins

Where the Energy Comes From: Bonds, Burning and Missouri’s Power

Unit 1  ·  Phenomenon Launch & Questioning  ·  Lesson 1 of 20

Where the Energy Comes From: Bonds, Burning and Missouri’s Power

9-12.PS1.A.5RLP-CHEMB
A river power plant with faint bonds breaking and forming in the steam.
By the end of this lesson I can…

define system and surroundings, classify a reaction as exothermic or endothermic from the sign of ΔH and an energy diagram, and use average bond energies to estimate the energy released by burning a fuel.

Instruction

The phenomenon. In 2024 Missouri’s power plants generated 66,875,710 megawatt-hours (MWh) of electricity, and 58.1 percent of it, 38,831,623 MWh, came from burning coal (U.S. Energy Information Administration, EIA). Labadie, the state’s largest plant, alone made 14,401,714 MWh. Every one of those kilowatt-hours began as a chemical reaction in which a fuel combined with oxygen and released energy. The same kind of energy exchange fits in your hand: a pocket hand warmer gets hot while an instant cold pack gets cold. Where does the energy come from when something burns? Why does one reaction warm its surroundings and another chill them? And could you predict how much energy a reaction releases from its chemical formula alone?

System and surroundings. To keep track of energy you first draw a boundary. The system is the part of the universe you choose to study, such as the reacting chemicals in a bag. The surroundings are everything else: the bag, the air, your hand. A closed system exchanges energy but not matter with its surroundings; an isolated system exchanges neither. Energy is conserved, so any energy the system loses must show up in the surroundings, and the reverse.

Exothermic and endothermic. At constant pressure the heat exchanged in a reaction is the enthalpy change, ΔH, in kilojoules per mole of reaction as written. In an exothermic reaction the system releases energy to the surroundings and ΔH is negative; the surroundings warm up. In an endothermic reaction the system absorbs energy and ΔH is positive; the surroundings cool down. An energy diagram plots the energy of the reactants on the left and the products on the right: exothermic reactions step down, endothermic ones step up.

A bond-energy model. Why does a reaction release or absorb energy at all? Chemical bonds store energy. Breaking a bond takes energy in, and forming a bond gives energy out. Add up the bond energies you break, subtract the bond energies you form, and the difference is the energy change: ΔH ≈ Σ(bonds broken) − Σ(bonds formed). A reaction is exothermic when the new bonds are stronger in total than the old ones. The average bond energies in this lesson’s reading are not looked up from a guess; they are built from the National Institute of Standards and Technology (NIST) enthalpies of free atoms and of simple molecules: H–H 436.0, O=O 498.4, C–H 415.8, O–H 463.5, C=O in CO2 804.3 and C–C 330.4 kJ per mole of bonds.

Worked example. Burn methane, the main component of natural gas: CH4 + 2O2 → CO2 + 2H2O(g). Bonds broken: 4 C–H and 2 O=O, so 4(415.8) + 2(498.4) = 2,660.0 kJ. Bonds formed: 2 C=O and 4 O–H, so 2(804.3) + 4(463.5) = 3,462.6 kJ. ΔH ≈ 2,660.0 − 3,462.6 = −802.6 kJ per mole of CH4. Since one mole of methane is 16.0425 g, that is −802.6 ÷ 16.0425 = −50.0 kJ per gram, or about 50.0 kJ released for every gram burned. The negative sign tells you the system loses energy: exothermic.

How good is the model?. Be honest about one thing: the C–H, O–H and C=O values were built from methane, water and carbon dioxide, so getting methane right is built in. A real test uses a molecule the table was not built from. For propane, C3H8, the bond model gives −2,054.6 kJ per mole. The value from NIST formation enthalpies is −2,043.13 kJ, so the bond model is about 0.6 percent off. That is good enough to explain why the reaction is exothermic and to estimate its size, but not to replace measured data. Next lessons measure energy directly and then compute it with better data.

Your questions. Start a question board. Which of your questions can you test at home with a thermometer and a cup? Which need published data, such as NIST tables or EIA generation data? Which need a model, like the bond-energy sum? Then answer this in your own words: in the hand warmer, is the reacting chemical the system or the surroundings, and which way does energy flow?

📖 Read for this lesson

The reading opens over the lesson; close it to come back to exactly where you were. The checks below draw on it.

  • Missouri’s 2024 Electricity Mix and Bond Energies Built from NIST DataEIA Missouri State Electricity Profile 2024 (Tables 2B, 5, 6) and NIST Chemistry WebBook thermochemistry pages for H, O, C atoms, CH4, C2H6, C3H8, H2O and CO2, all retrieved 2026-11-15. Bond energies and test results are SLS calculations from those values. · about 3 min

    EIA’s 2024 Missouri generation table, the largest plants and Missouri’s coal heat value, plus a bond-energy table built step by step from NIST atomization and formation enthalpies and tested on methane and propane, so the opening question about Missouri’s burning fuels and the bond-energy model both rest on fetched data.

Vocabulary in context

  • system — The part of the universe chosen for study, such as the reacting chemicals; everything else is the surroundings.
  • exothermic — A change that releases energy to the surroundings; ΔH is negative.
  • endothermic — A change that absorbs energy from the surroundings; ΔH is positive.
  • enthalpy change (ΔH) — The heat exchanged at constant pressure, in kJ per mole of reaction as written.
  • average bond energy — The mean energy needed to break one mole of a particular type of bond in the gas phase.

Formative check

Work through these before moving on. They are not graded — they tell you whether the standard below has landed yet.

Make a prediction

Before you calculate: when methane burns, CH4 + 2O2 → CO2 + 2H2O(g), how does the energy needed to break all the bonds in the reactants compare with the energy released forming all the bonds in the products?

Forming releases more. Breaking the reactant bonds takes 2,660.0 kJ, and forming the product bonds releases 3,462.6 kJ, so −802.6 kJ is released overall: exothermic.
Fill in the blank

Using the average bond energies in this lesson, H2 + ½O2 → H2O(g) has ΔH = kJ per mole of water (include the sign).

+50 XP

An instant cold pack feels cold when you squeeze it. Which description is correct?

Cooling of the surroundings means the system took in energy: endothermic, ΔH > 0. Energy is conserved, not destroyed.

Using the bond-energy table and the propane test in this lesson’s reading, estimate ΔH for 2H2 + O2 → 2H2O(g) and compare it with 2 × (−241.826) from the NIST formation enthalpy of water vapor. Then explain in two or three sentences why the propane result is a better test of the model than the hydrogen or methane results, and what the size of the propane error tells you about when to trust a bond-energy estimate.

0 words
Quick self-check

How confident are you that you can classify a reaction as exothermic or endothermic and estimate its energy change from bond energies?

Not yetVery confident

Practice

Work these on paper or in your notebook, then open Check your answer. Aim for all of Fluency and Application; try at least one Challenge.

Printable version: this unit’s practice workbook (PDF)

Fluency

Build speed and accuracy with the core skill.

  1. Burning ethanol has ΔH = −1,367 kJ per mole. Is the reaction exothermic or endothermic, and does the system gain or lose energy?
    Check your answer
    Answer: Exothermic: the system loses 1,367 kJ per mole to the surroundings.
    A negative ΔH means energy leaves the system.
  2. Using H–H = 436.0 and O=O = 498.4 kJ/mol, how much energy is needed to break the bonds in 1 mol of H2 and ½ mol of O2?
    Check your answer
    Answer: 685.2 kJ
    436.0 + 0.5 × 498.4 = 685.2 kJ.
  3. Burning methane releases 802.6 kJ per mole by the bond model. How much energy is released by 0.250 mol?
    Check your answer
    Answer: 201 kJ released (ΔH = −201 kJ)
    802.6 × 0.250 = 200.65, so 201 kJ to three significant figures.
  4. On an energy diagram, are the products drawn higher or lower than the reactants for an endothermic reaction? What does the vertical gap show?
    Check your answer
    Answer: Higher. The gap equals ΔH, the net energy absorbed.

Application

Use the skill in context. Show your reasoning.

  1. Estimate ΔH for 2H2 + O2 → 2H2O(g) using the bond energies in this lesson’s reading. The NIST formation enthalpy of water vapor gives 2 × (−241.826) = −483.652 kJ. How close are they?
    Check your answer
    Answer: −483.6 kJ; within 0.05 kJ (0.01 percent)
    Broken: 2(436.0) + 498.4 = 1370.4. Formed: 4(463.5) = 1854.0. Difference −483.6 kJ.
  2. The bond model gives −2,054.6 kJ/mol for propane (gas water) while NIST formation data give −2,043.13 kJ/mol. Calculate the percent error of the bond model.
    Check your answer
    Answer: 0.56 percent
    |-2054.6 − (-2043.13)| ÷ 2043.13 × 100 = 0.56%.
  3. Use the bond-model result for propane (−2,054.6 kJ/mol) and its molar mass (44.0956 g/mol) to find the energy released per gram.
    Check your answer
    Answer: 46.6 kJ/g
    2054.6 ÷ 44.0956 = 46.59 kJ/g.
  4. How much energy is released by burning 1.00 kg of methane (bond model, −802.6 kJ/mol, molar mass 16.0425 g/mol)?
    Check your answer
    Answer: 50,030 kJ, about 50.03 × 104 kJ
    1000 ÷ 16.0425 = 62.33 mol; 62.33 × 802.6 = 50,030 kJ.

Challenge

Stretch problems. Expect to think before you write.

  1. A mixture of hydrogen and oxygen releases a lot of energy overall, yet it needs a spark to start. Using the idea that bonds must break before new bonds form, explain this, and sketch the energy diagram.
    Check your answer
    Answer: Some bonds (H–H, O=O) must break before the strong O–H bonds can form, so the system first rises in energy (an activation barrier) before dropping below the reactants; the spark supplies that first energy. The final level is below the reactants by ΔH.
  2. The bond model gives the methane reaction with gaseous water: −802.6 kJ. Vaporizing one mole of liquid water takes 44.0 kJ. Convert the result to the reaction that makes liquid water and say which value is closer to the measured NIST combustion enthalpy of about −890 kJ/mol.
    Check your answer
    Answer: −890.6 kJ with liquid water, closer to the measured value
    2H2O(g) → 2H2O(l) releases 2 × 44.0 = 88.0 kJ more: -802.6 − 88.0 = -890.6 kJ. Measured combustion enthalpies are for liquid water.

Review

Keep earlier skills sharp.

  1. How many moles of methane are in 25.0 g? (CH4 = 16.0425 g/mol)
    Check your answer
    Answer: 1.56 mol
    25.0 ÷ 16.0425 = 1.558 mol.
  2. What mass of CO2 forms when 10.0 g of CH4 burns completely? (CO2 = 44.0095 g/mol)
    Check your answer
    Answer: 27.4 g
    10.0 ÷ 16.0425 = 0.6233 mol CH4; 1 : 1 ratio; × 44.0095 = 27.43 g.
  3. What volume does 1.00 mol of an ideal gas occupy at 1.00 atm (101,325 Pa) and 25.0 °C (298.15 K)? Use R = 8.314 J/(mol·K).
    Check your answer
    Answer: 24.5 L
    V = nRT ÷ P = 1.00 × 8.314 × 298.15 ÷ 101,325 = 0.02446 m3 = 24.5 L.

Missouri Learning Standards — Science addressed: 9-12.PS1.A.5, 9-12.PS3.A.1, SEP.2, CCC.5, RST.11-12.7

Instructional focus: Using a bond-energy model to explain and estimate the energy change of a reaction

Reading

Missouri’s 2024 Electricity Mix and Bond Energies Built from NIST Data

EIA Missouri State Electricity Profile 2024 (Tables 2B, 5, 6) and NIST Chemistry WebBook thermochemistry pages for H, O, C atoms, CH4, C2H6, C3H8, H2O and CO2, all retrieved 2026-11-15. Bond energies and test results are SLS calculations from those values. · Public domain (EIA and NIST data), with SLS commentary and calculations

Why this reading. It gives you the Missouri electricity numbers behind the unit’s opening question (what burns, and how much energy comes out) and the bond-energy table you need to estimate a reaction’s energy change. Every bond energy here is built from published NIST enthalpies, so you can check each step.

Missouri electricity in 2024

The U.S. Energy Information Administration (EIA) publishes a yearly Missouri electricity profile. For 2024 it lists coal as Missouri’s primary energy source, a net generation of 66,875,710 megawatt-hours (MWh), and carbon dioxide emissions of 44,270 thousand metric tons from the electric power industry. The table below is generation by primary energy source. The percentages were recomputed here from the MWh column and match EIA’s published shares.

Source2024 net generation (MWh)Share of total
Coal38,831,62358.1%
Nuclear10,525,78415.7%
Natural gas9,099,56613.6%
Wind6,789,96410.2%
Hydroelectric1,020,4211.5%
Solar207,6760.3%
Petroleum147,5210.2%
Pumped storage147,4400.2%
Wood48,0460.1%

EIA also lists the largest Missouri plants by 2024 generation. Four of the top five burn coal.

PlantPrimary source2024 generation (MWh)
LabadieCoal14,401,714
CallawayNuclear10,525,784
Thomas HillCoal5,536,592
New MadridCoal5,325,976
IatanCoal4,033,814

Missouri’s delivered coal in 2024 averaged 8,884 Btu per pound of heat value, with 0.28 percent sulfur (EIA Missouri profile, Table 6). One kilowatt-hour is 3.6 million joules, so the energy in that coal is about 20.7 kJ per gram when you convert units (1 Btu = 1,055 J, from EIA’s 3,412 Btu per kWh).

Atomization enthalpies from NIST

The NIST Chemistry WebBook lists the standard enthalpy of formation of gaseous atoms. Each value is the energy needed to turn the element in its standard state into free gas atoms, so it is a bond-breaking energy.

SpeciesΔfH° (kJ/mol)
H(g)217.998
O(g)249.18
C(g)716.68
CH4(g)−74.6
C2H6(g)−84.0
C3H8(g)−104.7
H2O(g)−241.826
CO2(g)−393.51

Average bond energies built from them (kJ/mol)

  • H–H: 2 × 217.998 = 436.0. O=O: 2 × 249.18 = 498.4.
  • C–H: [716.68 + 4(217.998) + 74.6] ÷ 4 = 415.8, from methane.
  • O–H: [2(217.998) + 249.18 + 241.826] ÷ 2 = 463.5, from water vapor.
  • C=O in CO2: [716.68 + 2(249.18) + 393.51] ÷ 2 = 804.3.
  • C–C: from ethane, [2(716.68) + 6(217.998) + 84.0] − 6(415.8) = 330.4.
BondAverage energy (kJ/mol)
H-H436.0
O=O498.4
C-H415.8
O-H463.5
C=O804.3
C-C330.4

Testing the model

The first values come straight out of the molecules being tested, so agreement for methane is built in. The real test is a molecule the table was not built from, such as propane. Bond-energy estimate for C3H8 + 5O2 → 3CO2 + 4H2O(g): broken 8(415.8) + 2(330.4) + 5(498.4) = 6,479.2 kJ; formed 6(804.3) + 8(463.5) = 8,533.8 kJ; ΔH ≈ −2,054.6 kJ. From formation enthalpies: 3(−393.51) + 4(−241.826) − (−104.7) = −2,043.13 kJ. The estimate is about 0.6% too exothermic, because a table of averages ignores small differences between the same bond in different molecules.

Sources: EIA Missouri State Electricity Profile 2024 (eia.gov); EIA State Electricity Profiles, Missouri tables (xlsx) (eia.gov); NIST WebBook: methane (webbook.nist.gov); NIST WebBook: ethane (webbook.nist.gov); NIST WebBook: propane (webbook.nist.gov); NIST WebBook: water (webbook.nist.gov); NIST WebBook: carbon dioxide (webbook.nist.gov); NIST WebBook: atomic hydrogen (webbook.nist.gov); NIST WebBook: atomic carbon (webbook.nist.gov); NIST WebBook: atomic oxygen (webbook.nist.gov)

Up NextComplete & Continue →

Leave a Reply Cancel reply

Calorimetry: Measuring Energy Transfer at Home
Next

© 2026 The VR School | Career content by Wiley | Powered by Sejal Learning Systems.

Join free · Accreditation · Privacy Policy · Terms of Service

Modal title

Main Content