
plan and carry out an investigation comparing how water and sand heat and cool, and use specific heat to explain the difference between coastal and inland climates.
Phase 2: Investigate
Do Now. On a summer afternoon at the beach, the dry sand can be too hot to walk on while the ocean is cold enough to make you gasp. Both get the same sunlight. Write one explanation.
Two cups, one of water and one of sand, sit under a lamp for 10 minutes and then in the shade for 10 minutes. Which will be closer to its peak temperature 10 minutes after the lamp is switched off?
Same sunshine, different temperatures. The difference between hot sand and cold water is a property of the materials: how much energy they need to warm up.
Specific heat. The specific heat of a substance is the energy needed to raise the temperature of 1 kg of it by 1 °C. For liquid water it is about 4,184 J/(kg·°C); for dry sand, about 830 J/(kg·°C). The energy equation is
Q = m × c × ΔT
where Q is energy in joules, m the mass, c the specific heat and ΔT the temperature change.
Worked example 1. Give 1,000 J to 100 g (0.100 kg) of each. Water: ΔT = 1,000 / (0.100 × 4,184) ≈ 2.4 °C. Sand: ΔT = 1,000 / (0.100 × 830) ≈ 12.0 °C. The sand warms about five times as much from the same energy, and it cools about five times as fast when the energy source is removed.
Why water is so hard to heat. Water’s high specific heat comes from its polarity: its molecules are held together by hydrogen bonds. Energy added to water first goes into jostling and breaking those bonds before it speeds the molecules up. Other effects make the ocean even harder to heat than a lab cup: sunlight penetrates meters into clear water instead of stopping at the surface; waves and currents mix warmed water downward; and evaporation carries energy away. On land, the energy stays in the top few centimeters of soil.
Worked example 2: from the lab to the map. The ocean next to Coastal Town changes temperature only a few degrees over the year. Air that has passed over it arrives with the ocean’s temperature, so the coast has mild summers and mild winters: a 9 °F annual range in the sample normals. Valley Town, far from the ocean and surrounded by dry land that heats and cools quickly, has a range of 43 °F. The same property explains why coastal nights are rarely frosty and why the hottest temperatures in a region are usually in its deserts, not on its beaches.
Lab: heating and cooling water and sand. Question: do equal masses of water and dry sand heat and cool at different rates under the same lamp, and by how much? Plan first: the independent variable is the material; the dependent variable is temperature over time; list at least four controlled variables and decide with your team who measures what.
| Time (min) | 0 | 2 | 4 | 6 | 8 | 10 (lamp off) | 12 | 14 | 16 | 18 | 20 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Sand (°C) | |||||||||||
| Water (°C) |
Record every minute; the table shows every second minute to save space. No lamp? Use direct sunlight and read every 5 minutes, or analyze the teacher’s data from a class run.
Work through these during and after the lab.
Write the lab conclusion.
CER: which material heats and cools faster? Use your temperature changes as evidence, compute the ratio of the sand's rise to the water's, and explain the result with specific heat and Q = mcΔT.
Use your results to explain why Coastal Town's annual range is 9 °F while Valley Town's is 43 °F. Judge whether a cup of water is a fair model of an ocean.
Water’s high specific heat is the coast’s air conditioner. Next lesson we zoom out: what changes the climate of the whole planet?
How confident are you that you can I can investigate how water and sand heat and cool and use specific heat to explain coastal and inland climates.
Exit ticket: sketch the two heating-and-cooling curves and label which is water and why.
Timing: spans two 50-minute periods: day 1 the plan and the 20-minute run; day 2 graphing, ratios, error analysis and the CER.
Materials (per team): two identical clear plastic cups, 200 g dry sand, 200 g water, a kitchen balance, two digital or alcohol thermometers, a desk lamp with a 60 W-equivalent bulb, stopwatch, graph paper or spreadsheet, goggles.
Listen for: “water is cold, so it stays cold” (the cups start at the same temperature); mixing up heating rate and final temperature.
Support / stretch: provide a pre-labeled graph. Stretch: repeat with wet sand and explain where it falls between dry sand and water.