
construct a design built on circles, compute its arc lengths and sector or segment areas exactly, and prove the circle theorems it relies on.
Instruction
Circle geometry is everywhere in design: rose windows in cathedrals, the circular plazas of city plans, roundabouts, wheel rims, logos. In this project you design one, build it with justified constructions, and measure it exactly.
Choose a design. A rose window, a garden with circular beds and curved paths, a roundabout with approach roads, a tiled circular floor, or a logo. Set a real scale, for example a window 3 m in diameter.
Required elements.
- A regular polygon inscribed in a circle (hexagon, square or equilateral triangle), constructed as in Geometry A.
- The inscribed or circumscribed circle of a triangle in the design, constructed with angle bisectors or perpendicular bisectors.
- At least one tangent line constructed from an outside point (for example, a straight path that meets a circular bed smoothly, or a road meeting a roundabout).
- At least one inscribed angle whose measure the design depends on (for example, a viewing angle from a point on the circle).
Measurements. Compute, in exact form and in decimals, every arc length, sector area and segment area that a builder would need. A segment is the region between a chord and its arc: its area is the sector area minus the triangle area.
Worked example. A rose window has radius 1.5 m with a regular hexagon inscribed. Each hexagon side equals the radius, 1.5 m, and each side cuts off a 60° (π/3) arc of length 1.5 × π/3 = 0.5π ≈ 1.571 m. Each sector has area ½ × 1.52 × π/3 = 0.375π ≈ 1.178 m2; each central triangle is equilateral with area (√3/4) × 1.52 ≈ 0.974 m2; so each segment of colored glass between a side and the rim has area about 1.178 − 0.974 ≈ 0.204 m2. The six segments together need about 1.22 m2 of glass.
Proofs. Choose the two theorems your design depends on most (for example, tangent ⊥ radius, the inscribed angle theorem, the tangent construction, or the circumcenter construction) and write complete proofs, each in a different format.
Build it. Construct in GeoGebra or with compass and straightedge. In GeoGebra, drag the defining points to show the construction holds. Do not import other people’s GeoGebra files.
Presentation. Three minutes, live or recorded: show the design, explain one construction and present one proof. A written script is an equal-credit alternative.
📖 Read for this lesson
The reading opens over the lesson; close it to come back to exactly where you were. The checks below draw on it.
Formative check
Work through these before moving on. They are not graded — they tell you whether the standard below has landed yet.
Area of a circular segment
Tap to revealSector area minus the triangle formed by the chord and the two radii.
Arc cut off by one side of an inscribed regular hexagon
Tap to reveal60°, or π/3 radians.
Tangent construction key fact
Tap to revealAn angle inscribed in a semicircle is a right angle.
Circumcenter
Tap to revealIntersection of the perpendicular bisectors; equidistant from the vertices.
A circle of radius 1.5 m has an inscribed regular hexagon. What is the arc length cut off by one side?
Stage 1: describe your design and its scale, show where each of the four required elements appears, and name the two theorems you will prove.
How confident are you that you can build a circle design with justified constructions, exact measurements and proofs?
Unit 3 checkpoint
Do this before you start the task. It covers the whole unit and tells you what to review first.
Which sequence shows a circle of radius 2 centered at A is similar to a circle of radius 5 centered at B?
A tangent segment from a point 10 units from the center of a circle of radius 6 has length .
A radius drawn to a point of tangency is perpendicular to the tangent.
An inscribed angle on a 150° arc measures °.
An angle inscribed in a semicircle measures:
Tangents at A and B meet at P. If the minor arc AB is 124°, then angle APB is °.
An inscribed quadrilateral has one angle of 71°. Its opposite angle is:
The incenter of a triangle is the intersection of its:
In the tangent construction from an outside point P, the auxiliary circle is centered at P.
225° equals π/4 radians.
Arc length for radius 9 and central angle 2π/3 is:
A sector of radius 6 with a 60° angle has area π.
Submit: Circle Design with Proof (construction, measurement sheet, two proofs) and three-minute presentation
Task: Design a rose window, garden, roundabout, floor or logo built on circles, with an inscribed regular polygon, a triangle’s inscribed or circumscribed circle, a constructed tangent and a key inscribed angle. Compute its arcs, sectors and segments exactly and prove two circle theorems it relies on.
Submission workflow
- Stage 1 — Plan. Design sketch with scale, list of required elements and where each appears, and the two theorems you will prove.
- Stage 2 — Peer-reviewed draft. Constructions, measurement sheet and proof drafts; a partner re-computes two measurements and checks each construction’s justification. Submit a revision note.
- Stage 3 — Revised final. Completed design, exact and decimal measurement sheet, and two proofs in different formats.
- Stage 4 — Presentation. Three-minute live or recorded presentation, or an equal-credit written script.
How it is scored
| Criterion | What proficient looks like |
|---|---|
| Constructions (G.C.A.3, G.CO.D.11) | Inscribed polygon, triangle circle and tangent constructed correctly and justified. |
| Angles (G.C.A.2) | Key inscribed and related angles identified and computed correctly. |
| Arcs and areas (G.C.B.4 / G.C.B.5) | Arc lengths, sector and segment areas correct in exact and decimal form, in real units. |
| Proofs (MP.3) | Two complete, valid proofs in different formats. |
| Tools (MP.5) | Construction holds under dragging or is verified by hand measurement. |
| Presentation | Clear explanation of one construction and one proof. |
The Circle Design Brief: A Plaza Fully Specified, Its Measurement Sheet Half Worked, and the Rose Window Checked
Constructed design brief written for this course: a circular plaza with an inscribed square, a triangular bed with its inscribed and circumscribed circles, a tangent path from an outside point and a viewing angle, all on exact coordinates, with the measurement sheet partly worked; the lesson’s rose window recomputed · SLS original (constructed teaching data)
Why this reading. The task asks for a design with four required elements, a measurement sheet in exact and decimal form, and two proofs. Designing from nothing is hard, and a peer reviewer needs a design whose numbers can be checked. So this brief gives you a complete design to start from, on coordinates, with half of its measurement sheet worked and the other half left for you. Use it as your design, scale it, or replace any element with your own; either way, every number you report must be reproducible the way these are. The rose window from the lesson is recomputed at the end so that the standard of a worked measurement is clear.
The Oak Street Plaza (illustrative), 1 unit = 1 m
| Element | Specification | Required element it satisfies |
|---|---|---|
| Plaza | circle with center O(0, 0), radius 6 | the base circle |
| Paved square | inscribed square with vertices (6, 0), (0, 6), (−6, 0), (0, −6) | 1. regular polygon inscribed in a circle |
| Planting bed | right triangle D(10, −3), E(18, −3), F(10, 3), with a circular fountain basin inscribed in it and a circular edging path circumscribed about it | 2. inscribed and circumscribed circles of a triangle |
| Entrance paths | two straight paths from the gate P(0, −10) that meet the plaza’s rim tangentially | 3. tangent lines from an outside point |
| Viewing point | a bench at V(0, 6) on the rim; the design depends on the angle at V between the square’s vertices (6, 0) and (0, −6) | 4. an inscribed angle |
Measurement sheet
| # | Measurement | Exact | Decimal |
|---|---|---|---|
| 1 | side of the square | 6√2 m | 8.485 m |
| 2 | arc of the rim cut off by one side of the square | 6 × π/2 = 3π m | 9.425 m |
| 3 | one sector between two adjacent square vertices | ½ × 36 × π/2 = 9π m2 | 28.274 m2 |
| 4 | one segment of paving between a side and the rim (sector minus triangle) | 9π − ½ × 6 × 6 = 9π − 18 m2 | 10.274 m2 |
| 5 | all four segments together | 36π − 72 m2 | 41.097 m2 |
| 6 | circumcenter and radius of the bed’s edging path | ||
| 7 | incenter and radius of the fountain basin | ||
| 8 | length of each tangent path from P to the rim | √(102 − 62) = 8 m | 8.000 m |
| 9 | the two points of tangency | (±4.8, −3.6) | |
| 10 | the circumscribed angle at P between the two paths | 73.74° | |
| 11 | the minor arc of the rim between the two points of tangency | 11.128 m | |
| 12 | the inscribed angle at V between (6, 0) and (0, −6) |
Row 5 checked two ways. The whole disk is 36π and the square is (6√2)2 = 72, so the paving outside the square is 36π − 72 = 41.097 m2, which is four times row 4. A measurement sheet that can be checked two ways is what the rubric means by “correct in exact form.”
Row 9 checked. The tangent points satisfy both x2 + y2 = 36 (on the rim) and the right angle OTP. From P(0, −10), they are (±4.8, −3.6): 4.82 + 3.62 = 23.04 + 12.96 = 36, and PT = √(4.82 + 6.42) = √64 = 8, matching row 8. Construct them the Lesson 3.3 way (the circle on OP as diameter, with center (0, −5) and radius 5) and confirm the two circles cross there.
Rows 6 and 7 hints. The bed is a right triangle with legs 8 and 6 and hypotenuse 10, with the right angle at D. Lesson 3.3’s file tells you where the circumcenter of a right triangle is and gives a shortcut for the inradius; the answers here are translations of that triangle’s answers by (10, −3).
Rows 10 to 12. The central angle between the two tangent points has cosine (−3.6)/6 = −0.6 measured from the downward radius, so each half is arccos(0.6) = 53.13°, and the whole central angle is 106.26°; the circumscribed angle is its supplement, 73.74°, and the arc in row 11 is 6 × 106.26 × π/180. You can get row 10 without the arccos: in right triangle OTP, sin(half the angle at P) = 6/10. Row 12 is a pure theorem question: which arc does the angle at V intercept, and how big is it?
The two proofs this design needs
The design’s paths depend on tangent ⊥ radius (Lesson 3.1) and its construction of them on an angle in a semicircle is right (Lesson 3.2); the bench’s viewing angle depends on the inscribed angle theorem. Choose two, write one as a two-column proof and one as a paragraph proof, and point to the row of the measurement sheet each proof underwrites.
The rose window, recomputed
Radius 1.5 m with an inscribed regular hexagon. Side = radius = 1.5 m. Each side cuts off π/3 of the rim: arc = 1.5 × π/3 = 0.5π = 1.5708 m. Sector = ½ × 1.52 × π/3 = 0.375π = 1.1781 m2. Central triangle = (√3/4) × 1.52 = 0.9743 m2. Segment = 1.1781 − 0.9743 = 0.2038 m2; six segments = 1.2228 m2. Check: 2.25π − 6 × 0.9743 = 7.0686 − 5.8457 = 1.2229 m2, the same to rounding. If you scale the plaza or the window, remember from Unit 1 that lengths scale by k and every area on the sheet by k2; a 3 m window has four times the glass, not twice.