
derive, using similarity, that arc length is proportional to radius, define radian measure, convert between degrees and radians, and compute arc lengths and sector areas in applied problems.
Instruction
Arc length is proportional to radius. Fix a central angle, say 72°. Draw circles of radius 1, 2 and 5 centered at the angle’s vertex. A dilation centered at the vertex with scale factor k takes the circle of radius 1 onto the circle of radius k, and takes the arc cut off by the angle onto the arc cut off on the larger circle. Dilations multiply all lengths by k, so the arc on the radius-k circle is k times the arc on the unit circle. So for a fixed angle, arc length ÷ radius is the same for every circle.
Radian measure. That constant of proportionality is a way to measure the angle itself. The radian measure of a central angle is
θ = s / r (arc length divided by radius), so s = rθ.
One radian is the angle whose arc equals the radius. A full turn has arc 2πr, so a full turn is 2πr / r = 2π radians. Therefore
360° = 2π radians, 180° = π radians, 1 radian = 180°/π ≈ 57.3°.
Conversions. Multiply degrees by π/180 to get radians; multiply radians by 180/π to get degrees.
- 135° × π/180 = 3π/4 radians.
- 72° × π/180 = 2π/5 radians.
- 2 radians × 180/π ≈ 114.59°.
Sector area. A sector with angle θ (radians) is the fraction θ/(2π) of the whole disk, so its area is (θ/2π) × πr2 = ½r2θ. In degrees, the same fraction is θ°/360.
Worked example. Radius 10, central angle 72° = 2π/5. Arc length s = 10 × 2π/5 = 4π ≈ 12.57. Sector area = ½ × 100 × 2π/5 = 20π ≈ 62.83. Check with fractions of the circle: 72/360 = 1/5, and the full circumference and area are 20π and 100π; one-fifth of each is 4π and 20π.
Applications (G.MG.A.1).
- Wheels. A bicycle wheel 66 cm in diameter travels one circumference per revolution: 66π ≈ 207.3 cm. A wheel that turns through 3 radians rolls 33 × 3 = 99 cm; the radian measure turns rotation straight into distance.
- Clocks. A 15 cm minute hand in 20 minutes sweeps 120° = 2π/3 radians, so its tip travels 15 × 2π/3 = 10π ≈ 31.42 cm.
- Sprinklers. A sprinkler with a 12 m throw that sweeps 110° waters (110/360) × π × 122 ≈ 138.23 m2.
Why radians? Degrees are an ancient convention (360 divides nicely). Radians come from the circle itself, which is why s = rθ has no conversion factor in it, and why later courses in trigonometry and calculus use radians throughout.
Workshop. Measure a real circular object’s sectors, such as a slice of a round table, a sprinkler’s arc or a curved track, then compute arc lengths and areas in both units and check one by direct measurement with a string.
📖 Read for this lesson
The reading opens over the lesson; close it to come back to exactly where you were. The checks below draw on it.
Formative check
Work through these before moving on. They are not graded — they tell you whether the standard below has landed yet.
What is 135° in radians?
A sector of radius 10 with a 72° angle has arc length π and area π.
For a fixed central angle, doubling the radius doubles the arc length and doubles the sector area.
Explain, using a dilation, why the ratio of arc length to radius is the same for every circle with the same central angle, and why that makes the radian a sensible way to measure angles.
How confident are you that you can derive radian measure, convert between degrees and radians, and compute arcs and sectors?
Practice
Work these on paper or in your notebook, then open Check your answer. Aim for all of Fluency and Application; try at least one Challenge.
Printable version: this unit’s practice workbook (PDF)
Fluency
Build speed and accuracy with the core skill.
- A circle has radius 10. For a central angle of 72°, find the arc length and the sector area in terms of π.
Check your answer
Answer: arc length = 4π; sector area = 20πThe sector is 72/360 of the circle; in radians the angle is 2π/5, and s = rθ. - A circle has radius 12. For a central angle of 60°, find the arc length and the sector area in terms of π.
Check your answer
Answer: arc length = 4π; sector area = 24πThe sector is 60/360 of the circle; in radians the angle is π/3, and s = rθ. - A circle has radius 8. For a central angle of 72°, find the arc length and the sector area in terms of π.
Check your answer
Answer: arc length = 16π/5; sector area = 64π/5The sector is 72/360 of the circle; in radians the angle is 2π/5, and s = rθ. - A circle has radius 4. For a central angle of 45°, find the arc length and the sector area in terms of π.
Check your answer
Answer: arc length = π; sector area = 2πThe sector is 45/360 of the circle; in radians the angle is π/4, and s = rθ. - A circle has radius 12. For a central angle of 72°, find the arc length and the sector area in terms of π.
Check your answer
Answer: arc length = 24π/5; sector area = 144π/5The sector is 72/360 of the circle; in radians the angle is 2π/5, and s = rθ. - A circle has radius 3. For a central angle of 150°, find the arc length and the sector area in terms of π.
Check your answer
Answer: arc length = 5π/2; sector area = 15π/4The sector is 150/360 of the circle; in radians the angle is 5π/6, and s = rθ. - Convert 15° to radians.
Check your answer
Answer: π/12Multiply by π/180. - Convert π/12 radians to degrees.
Check your answer
Answer: 15°Multiply by 180/π. - Convert 36° to radians.
Check your answer
Answer: π/5Multiply by π/180. - Convert 300° to radians.
Check your answer
Answer: 5π/3Multiply by π/180.
Application
Use the skill in context. Show your reasoning.
- A bicycle wheel has a diameter of 66 cm. How far does the bike travel in one revolution, and in 100 revolutions (to the nearest meter)?
Check your answer
Answer: 66π ≈ 207.3 cm; about 207 m in 100 revolutions - A minute hand is 15 cm long. How far does its tip travel in 20 minutes?
Check your answer
Answer: 10π ≈ 31.42 cm20 minutes is 120° = 2π/3 radians; s = 15 × 2π/3. - A sprinkler with a 12 m throw sweeps 110°. Find the watered area to the nearest square meter.
Check your answer
Answer: about 138 m2(110/360) × π × 122. - A 16-inch pizza is cut into 8 equal slices. Find the crust length and the area of one slice.
Check your answer
Answer: 2π ≈ 6.28 in; 8π ≈ 25.13 in2Radius 8; angle 45° = π/4.
Challenge
Stretch problems. Expect to think before you write.
- Taking the Earth’s radius as 6,371 km, how far north must you travel along a meridian to change your latitude by 1°? Use radians.
Check your answer
Answer: about 111.2 kms = rθ with θ = π/180.
Review
Keep earlier skills sharp.
- Find the center and radius of the circle x2 + 16x + y2 + 15 = 0.
Check your answer
Answer: center (−8, 0); radius 7Group and complete the square in x and in y. - Find the volume of a cylinder with radius 5 cm and height 20 cm. Give an exact answer and, if it involves π, a decimal to the nearest tenth.
Check your answer
Answer: 500π cm3 ≈ 1,570.8 cm3 - An inscribed angle intercepts a 96° arc. Find it.
Check your answer
Answer: 48°
The Arc and Sector File: An Exact-Value Table, a 400-Meter Track, a Sprinkler Plan and Two Clocks
Constructed teaching material written for this course: an arc-length and sector-area table in exact and decimal form, an illustrative 400 m running track with its bends and straights, a lawn sprinkler layout, and clock and wheel problems, with worked rows · SLS original (constructed teaching data)
Why this reading. The workshop says “measure a real circular object’s sectors” and check one by direct measurement. If you have a round table or a sprinkler, measure it. If not, here are objects with their dimensions given, so the computing and the checking can still happen. The track and the lawn are designs written for this lesson; they use realistic dimensions but are not measurements of a particular facility. Every value here should be computed in radians once and in degrees once, and the two must agree.
Table 1. Exact and decimal
s = rθ and A = ½r2θ with θ in radians. Two rows are worked.
| r | Angle | θ (radians) | Arc length | Sector area |
|---|---|---|---|---|
| 6 | 60° | π/3 | 2π ≈ 6.283 | 6π ≈ 18.85 |
| 9 | 150° | 5π/6 | 7.5π ≈ 23.56 | 33.75π ≈ 106.03 |
| 4 | 210° | |||
| 12 | 1.5 radians | 1.5 | ||
| 2.5 | θ such that the arc is 2.5 | |||
| 10 | 72° (the lesson’s example) | 2π/5 |
The fifth row is the definition of a radian in disguise. The fourth row has no π in its answers; explain why an angle given in radians produces that.
Table 2. A 400 m running track (illustrative design)
The track is two straights joined by two semicircular bends. Runners in lane 1 are measured along a line 0.30 m outside the inner edge (the curb). Lanes are 1.22 m wide, and each lane’s running line is 0.20 m outside its own inner line.
| Dimension | Value |
|---|---|
| Length of each straight | 84.39 m |
| Radius of the curb at each bend | 36.50 m |
| Radius of the lane-1 running line | 36.50 + 0.30 = 36.80 m |
Lane 1, worked. Two semicircles of radius 36.80 make one full circle: 2π × 36.80 ≈ 231.22 m. Add two straights: 231.22 + 2 × 84.39 = 231.22 + 168.78 = 400.00 m. The design closes.
Now lane 4. Its running line is three lane widths plus 0.20 m outside the lane-1 line’s inner edge: radius 36.50 + 3(1.22) + 0.20 = 40.36 m. Compute the lap length and the stagger, the head start a lane-4 runner must be given in a one-lap race so that everyone runs 400 m. Then answer the question that makes coaches argue: a runner in lane 4 covers the bend in the same time as a runner in lane 1 covers theirs; who is running faster, and by what ratio? Both bends are 180°; only s = rθ distinguishes them.
Table 3. A sprinkler plan
A rectangular lawn is 20 m by 12 m. Four quarter-circle sprinklers sit in the corners, each with a 6 m throw, and one half-circle sprinkler with a 4 m throw sits at the midpoint of one long side.
| Sprinkler | Angle | Radius | Area watered |
|---|---|---|---|
| each corner (4 of them) | 90° = π/2 | 6 m | ½ × 36 × π/2 = 9π ≈ 28.27 m2 |
| the half-circle | 180° = π | 4 m |
First show, with a sketch and the coordinates of the sprinklers, that none of the five watered regions overlaps and none leaves the lawn (the two corner sprinklers on a 12 m side just touch). Then total the watered area, express it as a fraction of the lawn, and compare it with the lesson’s sprinkler, 110° at 12 m, which waters 44π ≈ 138.23 m2. The two totals are related in a way worth noticing; explain it with fractions of a circle. Finally propose one change to the plan that raises the fraction watered, and compute it.
Two clocks and a wheel
- Minute hand, 15 cm: from 12:00 to 12:40 it turns 240° = 4π/3; the tip travels 15 × 4π/3 = 20π ≈ 62.83 cm. (Worked.)
- Hour hand, 10 cm: from 3:00 to 3:40 it turns 40 minutes’ worth of the 30° between hour marks. Find the angle in degrees and radians and the distance the tip travels.
- Bicycle wheel, 66 cm diameter, as in the lesson: one revolution rolls 66π ≈ 207.3 cm. How many revolutions in 1 km, and through how many radians does the wheel turn? A bike computer counts revolutions with a magnet; explain why it needs the wheel diameter typed in, and what error a 1 cm mistake in the diameter causes over 10 km.
Check one by measurement
Take any circular object you have, a plate, a lid or a wheel, and measure its radius. Choose a sector by marking two points on the rim, measure the arc with a string, and compute θ = s/r. Then measure the same angle with a protractor at the center and convert. Report both, the difference, and which measurement you trust more and why.